Microscope Lamps and Accessories
Electron Microscopy Sciences Omniprobe FIB Lift-Out Grid 4-Post, Copper
Custom 4-post lift-out grids for in-situ lift-out. Include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with "V" shaped alignment surfaces. Sides have lower profile for easier access to outermost posts. 3 mm diameter.
Material: Copper
Electron Microscopy Sciences PS5 Micrometer Standard with Graticules Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A Certificate of Comparison from Pyser-SGI, Graticules Division compares the scale to a NPL calibrated in-house standards. A statemen is provided on the accuracy of the item with respect to these standards.
Electron Microscopy Sciences EMS Gold Aperture with 300 µm hole, 3 mm O.D., 0.12 mm thick
Advanced techniques of thin metal film application permits the apertures to retain a clean hole edge during prolonged beam exposure. Ultra-thin, half-micron design discourages contaminant accumulation and stabilizes astigmatic conditions to provide longer life. Conventional mechanical cleaning involving costly down-time is no longer necessary. Because the foil is ultra thin, care must be taken when handling the gold foil apertures.
Size: 300 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences X-Ray Window Silicon Nitride Film, 1000 µm, 100 nm
Ideal substrates for x-ray microscopy and x-ray spectroscopy techniques. State-of-the-art manufacturing and expert engineering allow for competitive prices of these windows. Made in the USA, these X-Ray windows are entirely plasma cleanable to remove organic contamination. Flat, uniformly deposited films provide consistent backgrounds with low field-to-field variability and high x-ray transmission. For high temperature and differential pressure environments.
Dimensions: 1000 µm
Electron Microscopy Sciences SEM Stub with 75 mm Head and Pin 19 mm
A larger SEM aluminum sample holder for larger samples.
Height: 19 mm
Electron Microscopy Sciences Microheat Hot Plate Model MH4, 12V DC
The microheatheat stabilized small hot plate combined with power supply is ideal for thermoplastic gluing of cross-sectional samples for electron microscopy under stereo optical microscope. The Microheat makes the embedding procedure easier and helps ensure bubble-free sticking. Due to its small dimensions it can be easily placed on the specimen table of the stereo optical microscope.
Meiji Techno America Stage micrometer, 1mm divided into 100 units, 0.01mm
Stage micrometer, 1mm divided into 100 units, 0.01mm
Electron Microscopy Sciences MicroMounts™ Crystal Tool with 50 µm Aperture and 25 mm pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals.
Aperture: 25 mm pin
Electron Microscopy Sciences Single Cross Line Reticle RET 42, 21 mm, 9 µm Line width
High quality, precision made standard reticles are manufactured to use with our microscope eyepieces. All recticles are chrome on glass and positive polarity.
Size: 21 mm
Line width: 9 µm
Electron Microscopy Sciences Thin Sample Holder, 15x10 mm Stub
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For most AMRAY: 1/2" diameter, 1/8" dia. Pin (3.1mm) with split openings up to 1/4" (6.4mm), with 15mm (9/16") pin height
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 24.5 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 24.5 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Electron Microscopy Sciences Microscope Slide End Label SLS-15, Standard, 15/16" x 15/16"
These specialty Microscope Slide Labels and matching End Labels are available in standard (thin) or pathology (tissue high) thickness, and square or round corner (RC). Permanent adhesive holds labels in place during use and long-term storage. Sheet Form Size is 5 1/4" x 8". Standard thin thickness. Square corners.
Use: Standard
Size: 15/16" x 15/16"
Electron Microscopy Sciences TEM Screen Recoating Topcon Large Viewing
For optimum viewing, fluorescent screens should be recoated regularly. Viewing screens are easily damaged by the electron beam, especially at high accelerating voltages where knock-on damage can be severe. A proprietary process where 1 to 2 micron particles of phosphor are deposited on the screen and produce the highest possible resolution.
Electron Microscopy Sciences BEEM Cap Holder Set Multi Task
The Multi-Task BEEM Capsule Holder is designed to hold size "00" BEEM capsule during resin polymerization. Use whenembedding and polymerizing resin by microwave under water. The direct contact of the microwave energy to the resin causes the resin to heat to quick and leads to micro bubbles inside the resin block and possible damage to the tissues. This is eliminated by immersing the resin capsule in a water bath during microwaving. This indirect contact' of microwave energy to the resin will help the embedding block polymerize nicely and homogeneously and avoids the overheating of the tissue.
Mold is machined from polyethylene block, comes in two parts: bottom part which holds the BEEM capsule, and the second part which is placed on top and is securd by two plastic screws to ensure the BEEM capsules are in place and capsule lid will not pop out during under water polymerization or microwave irradiation.