Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences SEM Stub Hitachi Cylinder 5/8" surface, 1/2"height, Aluminum
Hitachi SEM mounts are made from lathe finished ultra-pure aluminum.
Head: 5/8"
Height: 1/2"
Electron Microscopy Sciences Cargille Immersion Oil Type FF 1 OZ
After years of development and field testing, we now have available two new PCB-Free Immersion Oils for Fluorescence Microscopy. Has virtually no background fluorescence making it ideal for observing low levels of fluorescence. Highly stable, water white, and non-hydroscopic. Substituted for other fluorescence microscopy immersion oils.
Electron Microscopy Sciences SEM Pin Stub Zeiss Flat End Pin, Slotted 1/2" head, Aluminum
Zeiss SEM mounts. Flat end pin and slotted head. Made from ultra-pure aluminum with standard lathe finish.
Head: 1/2"
Height: 1/8"
Electron Microscopy Sciences AFM Metal Specimen Discs, 15 mm
These are high quality metal discs with smooth edges and flat surfaces for use in Atomic force Microscopy.
Diameter: 15 mm
Electron Microscopy Sciences Omniprobe FIB Lift-Out Grid 4-Post
Custom 4-post lift-out grids for in-situ lift-out. Include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with "V" shaped alignment surfaces. Sides have lower profile for easier access to outermost posts. 3 mm diameter.
Electron Microscopy Sciences Press-To-Seal Clear Silicone Sheet, 0.25 mm thick
Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone isolators allow researchers to isolate specimens using removable hydrophobic barriers. They may be used to isolate cells grown in culture dishes or separate multiple specimens affixed to microscope slides. Without Adhesive.
Thickness: 0.25 mm
Electron Microscopy Sciences Omniprobe Lift-Out Grids for in-situ FIB, Copper
Custom copper lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations with both vertical bars and "V" shaped attachment surfaces. 3 mm diameter
Material: Copper
Ted Pella Inc PELCO Center-Marked Grids, 200 mesh, 3.0mm O.D., Copper, 100/vial
The PELCO Grids are usually somewhat thicker than similar TEM grids made by electro plating processes which makes them stiffer and easier to handle without the danger of bending, but still maintain a good definition of the grid bars. The wide rims (350-400µm) on the PELCO Grids provide additional stiffness and minimize the potential of interfering with the sample when picking up and handling the grids with tweezers
Moc Incorporated HLX EFR 15V 150W
This item has a minimum qty of 2 per supplier requirements.
HLX EFR 15V 150W
Electron Microscopy Sciences Carbon Support Film 3-4 nm thick on Square 200 mesh Copper Grid
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Ultra-thin thickness is 3 to 4 nm.
Grid: Copper
Electron Microscopy Sciences EMS Lacey Carbon Film 50 µm holes on 300 mesh Cu
This carbon coated film on a broken pattern consists of woven-mesh-like holes of different sizes and shapes. This type of pattern provides support but does not interfere when observing specimen sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Copper
Hole: 50 µm
Electron Microscopy Sciences Maxtaform London Finder Grid, 200 mesh Copper, 127 µm Pitch
Maxtaform grids with reference patterns are of the highest consistent quality.
Material: Copper
Pitch: 127 µm
Electron Microscopy Sciences Maxtaform London Finder Grid, 135 mesh Copper, 188 µm Pitch
Maxtaform grids with reference patterns are of the highest consistent quality.
Material: Copper
Pitch: 188 µm
Research Products International Corp JTR Press-to-Seal Silicone Isolators, 2.0mm Thick, 20mm Diameter, 25 per Package
JTR Press-to-Seal Silicone Isolators confine specimens within a removable hydrophobic barrier. Designed to contain reactants and prevent contamination between specimens. Ideal for isolating cells grown in culture dishes or separate specimens on microscope slides. Silicone Isolators adhere to wet or dry surfaces and remain sealed to smooth surfaces during washing procedures. Easy to apply and remove.