Clamps
Adjustable devices designed to securely hold two objects together or to hold an object in place; used with standard-taper and ball-and-socket joints, glass and tubing assemblies, and with ring stands. Available as plastic joint clips, stainless steel pinch clamps, and taper clips.
A laboratory clamp is an essential piece of equipment used to support and secure labware and other laboratory apparatus such as flasks, reaction vessels, tubing, thermometers, probes, columns, funnels, and overhead stirrers.
Some laboratory clamps consist of a shaft and boss head, secured with hand-tightened thumbscrews, knurled nuts, or wingnuts onto a supporting rod, stand or scaffold. They may also include two- or three-pronged, adjustable closing jaws designed for gripping objects safely and securely.
Laboratory clamps are constructed of metals such as stainless steel, nickel-plated zinc, plated brass or diecast aluminum alloy for enhanced chemical, heat, and corrosion resistance. However, some components such as the adjusting screws may be made of plastic, and the prongs may also be lined or covered with cork, plastic, glass-fiber, or rubber for enhanced grip with minimal damage or breakage.
Laboratory Clamp Styles and Designs
• Universal, general-purpose clamps that are fully adjustable for accommodating and securing a wide range of items of different sizes such as columns and thermometers
• Retort clamps for securing round-bottom flasks and similar glassware
• Fork clamps for securing and supporting cone-and-socket ground glassware joints
• Three-prong extension clamps, sometimes available with spring-loaded jaws, for holding irregularly shaped or outsized objects
• Specialized clamps for securing burettes and condensers or reaction vessels
• Chain clamps, which incorporate a circular, adjustable chain loop to hold cylinders and beakers
Chemglass Life Sciences Clamp, Stainless Steel, Quick Release, 200mm Duran Flange
Clamp, Stainless Steel, Quick Release, 200mm Duran Flange. Made entirely from stainless steel, the clamp has three sections that firmly hold reaction vessel and lid together. Quick release mechanism has a screw adjustment for tension applied to the flange. 200mm Duran Flange.
Chemglass Life Sciences Clamp, Keck, Orange, Standard Taper, Fits Joint Sizes 34/28 & 34/45
Clamp, Keck, Orange, Standard Taper, Fits Joint Sizes 34/28 & 34/45. Made of Delrin, the clamp is non-corrosive and will not scratch glass. Can be used to 140 C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
Chemglass Life Sciences Clamp, Reactor Support, 100mm
Clamp, Reactor Support, 100mm. Similar to CG-1947, support clamp is designed to fit just below the flange of all Chemglass Reactors and permits Reactor lid to be detached without removing the Reactor body from the support clamp. Improved clamp is hinged on one side to swing open and allow complete access to install/remove reactor while clamp is still attached to lattice or benchtop support stand. Removable tightening knob holds Reactor secure. Clamps are constructed of stainless steel with a 1/2" OD X 9.5” long extension rod for connection to lattice and benchtop support stands. The inner portion of the clamp is lined with a high temperature red silicone rubber to prevent direct contact between the stainless steel and glass Reactor.PLEASE NOTE: IN ADDITION TO USING A CG-1947-A CLAMP, ALL REACTORS SHOULD BE SUPPORTED FROM BELOW USING THE CG-1948 SUPPORT RING.
Chemglass Life Sciences Clamp, Pinch, Stainless Steel, #12 without Locking Device
Clamp, Pinch, Stainless Steel, #12 without Locking Device. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.Note: The size #102 Stainless Steel pinch clamp is available on a special order basis.
Chemglass Life Sciences Flexible Clamp Kit, 12" Arm
Flexible Clamp Kit, 12" Arm. Flexible clamp for use in clamping laboratory apparatus that are normally difficult to hold due to their size, shape or odd angles. Unique flexible arm can be placed in virtually any position or angle. Available with a choice of a 12 or 18 inch long flexible arm. Complete item consists of a two-prong clamp head, three-prong clamp head, spring clamp head, flexible arm and a lab frame connector with utility wrench. Base plate and bench clamps are available as optional items.
Nordson Medical PHARMALOK LRG TUBE CLAMP 100PK
PharmaLok™ Large Tube Clamp, wall thickness 1/8” (3.2mm) to 1/4”(6.4mm), max OD 2.5” (63.5mm), Glass filled orange nylon 100/pk