Sampling Utensils
BURKLE INC Jumbo sampler, closed chambers, Alu/PTFE, 33.46 in. (85 cm)
The Jumbo zone sampler is used for sampling through all layers, especially of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow the sampling of large quantities of large grain sizes.
This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.
Because the lances can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of containers, silos or piles.
BURKLE INC Jumbo sampler, closed chambers, Alu/PTFE, 98.49 in. (250 cm)
The Jumbo zone sampler is used for sampling through all layers, especially of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow the sampling of large quantities of large grain sizes.
This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.
Because the lances can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of containers, silos or piles.
Grainger Ladle, Non-Sterile
The Grainger 3LEY4 Ladle is a non-sterile, stainless steel ladle with a capacity of 8 fluid ounces. It has a diameter of 3-1/2 inches and an overall length of 10-1/2 inches. The ladle has a hook handle for easy lifting and pouring. It can withstand temperatures up to 550°F. This USA-made ladle is commonly used in commercial kitchens for serving soups, gravies, and sauces. Its durable construction makes it suitable for frequent use. With proper care, this ladle should provide reliable service for cafeterias, restaurants, and other food service operations.
BURKLE INC Extension rod, 23.62 in. (60 cm), PTFE scoop
This extension rod complements the Bürkle PTFE dipper, allowing for sampling from greater distances. The rod is reinforced with a steel core and fully coated with PTFE to ensure maximum chemical resistance — especially useful when working with aggressive media.
Despite the added length, handling remains easy. For example, samples can be taken from large reactors, storage containers, or bodies of water without having to stand directly over the opening.
Spectrum Pharma Quip Specialties Inc ERGOTEC SFTY SCRAPE
Ungera ErgoTec Safety Scraper with Rubber Cover, accepts 1 1/2 in. Blade. Rubber grip prevents scraper from slipping in hand. Unique locking system prevents blade from sliding out. Push the nonslip trigger forward and blade is ready for use.
BURKLE INC Scoop AISI 304, V2A, capacity 33.81 oz. (1000 ml), Ø 3.94 in. (100 mm)
The stainless steel scoop can be used for taking samples of powders, granulates and pastes. Made of stainless steel AISI 304 (1.4301), the material is sterilizable and autoclavable. The rustproof stainless steel scoop has a smooth, high-gloss polished surface and is food-safe.
The tubular shape makes it easy to immerse the scoop in the medium being sampled. The high sides prevent the sample from trickling out. The round handle offers a good grip.
Essendant San Jamar Smart System with iQ Sensor Towel Dispenser, 16.5 x 9.75 x 12, Black/Silver
iQ Sensor technology offers consistent paper dispensing fewer misfires and length delay adjustment System features replaceable drive module and downloadable usage to PDA Holds up to 8 roll Automatic transfer reduces stub roll waste Touchless design reduces risk of cross-contamination Extended battery life (requires 4 D alkaline batteries not included) Self-adjusting sensing field Does not allow free pulling of paper Dual mode functionality- set to iQ Sensor or paper hanging out Towels Dispensers Type- Roll Towel Dispenser Dispenser Capacity (text)- One Roll Material(s)- Plastic Color(s)- Black/Silver
Research Products International Corp S Sampler Scoops, 4oz, 100/cs
Sterileware scoops are the perfect shape and size for taking samples, especially from wide-mouth containers. Designed to hold various capacities, these one-piece sterile scoops are molded of high-impact polystyrene plastic.
4 oz sampling scoops have a long handle that increases the distance between the hand and sample
When placed on a flat surface they remain upright; can be used as weighing boats
Made from FDA grade materials
Individually sealed and sterilized in a polyethylene bag ready for one time use and disposal
Lot stamped for accurate lot tracing; shipped with a Certificate of Processing for Sterilization
These sampling scoops are designed for retrieving samples from a larger source. Capacity/volumes are estimated and are not meant for taking exact sample weights/volumes. Stated volumes represent typical heaping samples.
Fritsch Milling And Sizing Inc Dividing Head Pom 3 Samples, L-27
Dividing head for LABORETTE 27 for 10 samples made of POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.
Division ratio: 1:30
Number of possible sub-samples: 3
Max. permissible particle size: 2.5 mm
Max. feed volume: 300 ml
Division: dry/wet
Capacity of sample bottles: 15, 20, 30 ml
Equipment: The dividing head is delivered with 3 samples bottles 15 ml with screw lid and funnel 10 mm dia. as well as 1 funnel each of 5 mm dia. for dry- resp. wet division as standard (included in the price of the dividing head).
This dividing head is also available in PTFE coated aluminium, article-number 27.2150.00 for the division of aggressive materials and suspensions, which attack POM plastic and aluminium.
Fritsch Milling And Sizing Inc Dividing Head Pom 10 Samples, L-27
Dividing head for LABORETTE 27 for 10 samples made of POM plastic is recommended for the division of materials and suspensions, which don't produce abrasion at the surface.
Division ratio: 1:10
Number of possible sub-samples: 10
Max. permissible particle size: 10 mm
Max. feed volume: 2,500 ml
Division: dry/wet
Capacity of sample bottles: 25, 250 ml (thread of glass bottles: GL55)
Equipment: The dividing head is delivered with 10 samples bottles 250 ml with screw lid and funnel 10 mm dia. as standard (included in the price of the dividing head).
This dividing head is also available in anodized aluminium, article-number 27.4150.00 for the division of materials and suspensions, which produce abrasion at the surface.