Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Chemglass Life Sciences Adapter Only, Distribution, 24/40 Joint
Distribution adapter replacement part for the CG1279 series of distilling receivers. 24/40 joint.
Chemglass Life Sciences Adapter Only, Distribution, 14/20 Jt
Adapter replacement part for the CG12754 distilling receiver. 14/20 Jt.
Chemglass Life Sciences Adapter Only, Vacuum, 24/40 Joint
Vacuum adapter only replacement part for the CG1281 series of distilling receivers. 24/20 joint.
Chemglass Life Sciences Vacuum Trap, 25mm Body OD x 200mm Body Length, 10mm OD Side and Inner Tubes
Vacuum Trap, 25mm Body OD x 200mm Body Length, 10mm OD Side and Inner Tubes. One piece trap used in the removal of undesired vapors in the vacuum system by condensation. 25mm Body OD x 200mm Body Length, 10mm OD Side and Inner Tubes.
Chemglass Life Sciences Vacuum/Inert Manifold, 4 Ports, 500mm Overall Width
Vacuum/Inert Manifold, 4 Ports, 500mm Overall Width. General purpose double bank vacuum manifold with 4 ports for use with vacuum and inert gas. Both tubes are 1/2 OD and have the upper left and lower right banks open. Ports are 0-4mm Chem-Vac™ Chem-Cap valves and are spaced 100mm center to center with 9mm OD tubulation.
Chemglass Life Sciences Vacuum Trap Body Only, 50/50
Vacuum Trap Body Only, 50/50. Replacement part for CG451410.
Chemglass Life Sciences Condenser, Gooseneck, Large, 29/42 Inner Joint, Distilling
Condenser, Gooseneck, Large, 29/42 Inner Joint, Distilling. Unique one-piece distilling condenser is actually a 75º adapter, highly efficient coil condenser and vacuum adapter in a compact one-piece unit. Available with a choice of three sizes of condensers with uptake inner joint as listed. Top thermometer joint is a 10/30 outer for use with a 3in immersion CG-3506 thermometer. Receiver joint on all sizes is a 24/40 inner having a sealed-in drip tip.
Chemglass Life Sciences Condenser, Reflux, 565mm, 24/40 Joint, Style B, 400mm Jacket Length
Condenser, Reflux, 565mm, 24/40 Joint, Style B, 400mm Jacket Length. Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Style "A", 105°, 45/50 Joint Size
Adapter, Vacuum Take-Off, Style "A", 105¿, 45/50 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105¿ angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Bump Trap, 500mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner
Bump Trap, 500mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner. Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Chemglass Life Sciences Outer Sleeve Only, Condenser, "C" Assembly, Plastic Coated
Outer Sleeve Only, Condenser, "C" Assembly, Plastic Coated. Outer sleeve only replacement part for the CG-1333-10 plastic coated condenser.
Chemglass Life Sciences Vacuum Trap, Complete, 32mm Body OD x 200mm Overall Length, 10mm OD Side and Inner Tubes, 29/42 Jt.
Vacuum Trap, Complete, 32mm Body OD x 200mm Overall Length, 10mm OD Side and Inner Tubes, 29/42 Jt. Similar to CG-4514, but with the top inlet tube bent at a 90º angle.
Chemglass Life Sciences Vacuum Trap, Removable Arms, Complete
Vacuum Trap, Removable Arms, Complete. Vacuum trap features removable arms to permit the trap to be easily disconnected for cleaning. The arms are made to permit clamping directly to the lattice and accept 5/8in I.D. vacuum hose. Trap and arms have 35/25 spherical joints for added flexibility while providing a leak-free seal. Supplied complete with one each of arm style “A” (180º), one each of arm style “B” (90º) and one each of arm style “C” (straight), and two CG-150-06 #35 stainless steel pinchclamps. The trap body is 2in (50mm) O.D. x 360mm long.
Chemglass Life Sciences Trap Arm, Style 'A'
Trap Arm, Style 'A'. Replacement part for CG452701 vacuum trap.
Chemglass Life Sciences 500ml Trap Body Only
500ml Trap Body Only. Replacement part for CG453101 vacuum trap.