Mills
Thomas Scientific MODEL 4 Mill Cleaning Kit - Brushes scrappers and wash bott
MODEL 4 Mill Cleaning Kit - Brushes scrappers and wash bott
Grainger Sq. End Mill Single End Carb 1/2
The Micro 100 Square End Mill Center Cutting is a high-performance end mill designed for milling a wide range of materials. This 1/4" diameter, 4 flute end mill has a 1/2" LOC and is made of solid carbide for durability and long tool life. It features a center cutting design allowing plunge cuts and drilling operations. With superior edge strength and wear resistance, this end mill is well-suited for slotting, side milling and facing in low and high temp alloys. It provides excellent chip control when machining aluminum, steel, stainless steel, titanium and other materials. This is a versatile end mill for high performance milling in a range of applications.
Grainger Sq. End Mill Single End Carb 1/2
The Grainger 14M520 is a 14-inch metal cutting band saw blade that is designed for ferrous metals like steel, stainless steel, and cast iron. It has 18 teeth per inch and features a flexible back to allow tight radius cuts. The blade is .025 inches thick and is made from high speed steel for durability. It can cut solids up to 3 inches thick and has a maximum speed of 3900 surface feet per minute. This bi-metal blade is good for straight and contour cutting applications.
Grainger Cor Rad End Mill 1/4 Carb 0.0200 rad
The Micro 100 Corner Radius End Mill is a high-performance end mill designed for machining corners and edges. It features a corner radius geometry that produces a smooth edge finish and eliminates stress concentrations. This 1/4" diameter, 2-flute end mill has a corner radius of 0.031" and is made of solid carbide for wear resistance and long tool life. With a TiAlN coating for heat resistance, this end mill can machine at high speeds in most steels, stainless steels, cast iron, aluminum, and other non-ferrous materials. It has a center cutting design for plunging capability. The Micro 100 Corner Radius End Mill is well-suited for complex contouring and finishing operations.
Grainger Cor Rad End Mill 3/32 Carb 0.0050 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and a 1/2 inch cutting diameter. The overall length is 2 inches. It has 2 flutes and can be run at speeds up to 12,000 RPM with feed rates up to 80 IPM. This end mill is made of solid carbide and can machine steels, cast iron, aluminum, and other non-ferrous materials. It features a TiAlN coating for increased tool life and heat resistance. The corner radius design allows for strong cutting edges and smooth wall blends.
Cole-Parmer Jar Mill without Jars; 115 VAC/60 Hz
These jar mills are ideal for grinding laboratory or high-purity samples. High-quality, powder-coated finish protects the exterior from oils, solvents, and chemicals. Mills provide quiet, smooth operation with the 1/12-hp, direct-drive DC motor. Easy to clean and maintain, these lab mills require no tension adjustment or lubrication. Rollers and brackets are easily repositioned and secured by convenient allen-head bolts. Rollers measure 12-5/8" (32.1 cm) in length and accept jars from 2" (5.1 cm) to 10" (25.4 cm) in diameter. Maximum capacity of 30 lb (13 kg).
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 1 mm Round Perforation
Sieve ring P-14 cl stainl. steel 1 mm round perforation
Sieve rings determine the end fineness of the sample.
Sieve rings with round and trapezoidal perforations are offered.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Fritsch Milling And Sizing Inc Gassing Lid with Valves Wc+Co P-7 Premium Line
Hardmetal tungsten carbide gassing lid with valves and seal ring for all grinding bowls premium line 80 ml, 45 ml, 20 ml volume for PULVERISETTE 7 premium line.
By using this special lid, the grinding bowl can be used for grinding in inert gas and for mechanical alloying - quickly and safely.
Gassing lids with Swagelok valves are available on request.
Fritsch Milling And Sizing Inc Grinding Bowl 20Ml Cpl. Tungsten Carbide P-7 Pl
Grinding bowl 20ml cpl. tungsten carbide P-7 pl with lid, seal ring and label
Grinding bowl volume: 20 ml
Useful capacity: 1 … 9 ml
Weight net: 1.390 kg
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, abrasive samples
All grinding bowls for the Planetary Micro Mill PULVERISETTE 7 premium line are delivered - as a standard – with a silicone seal ring. Due to this seal ring, the lid and grinding bowl are so tightly sealed that even grinding in suspension is possible absolutely problem-free.
World Precision Instrument #2 Carbide Ball Mill
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.
Grainger End Mill Kyocera MEW 1000W750152T 1
The Kyocera 170HJ9 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a 1/2" shank diameter and features TiAlN coating for increased hardness and heat resistance. This end mill is designed for general purpose milling in a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastics and other non-ferrous metals. It has a 30 degree helix angle and can be run at speeds up to 325 SFM. The 170HJ9 is made in Japan by Kyocera and sold individually.
Grainger Drill Mill 3/8 Carbide AlTiN
The Grainger Approved 3/8" Carbide Drill Mill is a high-speed steel cutting tool designed for milling and drilling operations. It features a 135 degree split point tip for faster penetration and reduced walking. The drill has a 3/8" diameter, is 6" overall length, and has a 1/2" shank diameter. It is coated in titanium nitride for increased hardness and lubricity. The drill mill is manufactured in the USA and ideal for use on steel, cast iron, aluminum and other non-ferrous metals. It provides good chip clearance while drilling and milling.
Grainger Cor Rad End Mill 3/8 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a bright finish, carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in a 2 flute design. The overall length is 2 inches and it can be run at speeds up to 25,000 RPM. This end mill is made of solid carbide and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic and graphite. It features a TiAlN coating for increased tool life and lubricity. The corner radius design allows for strong cutting edges and smooth wall blends. This is an ideal tool for slotting, side milling and profiling operations.
Bertin Corp Bacteria Lysing CK01 - 7mL tubes 50 prep
Lysing kit for Precellys - CK01 Micro-organism kit - 7mL tubes 50 prep. The CK01 matrix is composed of 0.1mm ceramic (zirconium oxide) beads and is designed for micro-organisms lysing like gram- and gram+ bacteria but also spores, micro-algae etc. It ensures optimal extraction yields of DNA/RNA/Protein for samples from 20mg to 200mg of tissue. The kits requires the use of the dedicated tube holder for Precellys Evolution (SP02520-810-NC010.0)
Bertin Corp 7mL holder pack for Precellys Evolution
7mL holder pack for Precellys Evolution Contains: 1 x 7mL grey blocking plate for Precellys Evolution(S000803-PEVO0-A.0) 1 x 7mL tubes holder for Precellys Evolution(S000914-PEVO0-A.0)