General Spectrometer Accessories
Glass Expansion DuraMist DC Nebulizer 1mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1070 Gas Fitting with Ratchet Nebulizer connector
DuraMist DC Nebulizer 1.0mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 21 with ratchet connector (1 pc). Compatible with Perkin Elmer Optima ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 1.0mL/min. Recommended not to exceed optimum 1.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns 502702959 and 70-803-1070.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC 1.0 mL Sample Loop, 0.8 mm ID, connect to ports #1 and #4
1mL Sample Loop, connect to ports nos 1 and 4
Ted Pella Inc 10-Compartment Styrene Box
Clear Polystyrene Plastic Sorting Boxes, with Hinged Covers.
Mitegen XP Up Screen Crystallization Screen, For High TEW Concentrations, 96 Solutions (1.7mL Each), Flexible TEW Addition
The XP Up Screen Crystallization Screen is uniquely optimized for exploring protein crystallization with high concentrations of the Anderson-Evans polyoxotungstate (TEW), specifically up to 10 mM. This screen provides 96 prominent crystallization conditions, each containing 1.7 ml of solution, offering significant flexibility for optimizing challenging targets. TEW is a powerful additive known to promote crystal contacts, improve crystal quality, and provide a valuable anomalous signal for phasing due to its six tungsten atoms. Experiments have shown that higher TEW concentrations (5-10 mM) can significantly increase crystallizability. For maximum flexibility, TEW is supplied in a separate tube, allowing users to add it to the protein droplet at their desired final concentration. Each kit includes 5 mg TEW (X-TEW-5) for preparing a 100 mM stock solution. Ship at ambient temperature, store at 8-10°C, with a 12-month shelf life.
Glass Expansion Quartz Torch-Low Flow with 1.4mm Injector for 700ES or Vista Radial
Quartz Torch (Low Flow), single-piece, with 1.4 mm ID injector, for Agilent (Varian) 700-ES or Vista Radial Series ICP-OES (2010069600). Recommended for less-volatile organic solvent analysis but not inert to samples containing hydrofluoric acid (HF).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tapered Quartz Injector 1.5mm
Tapered Quartz Injector with 1.5mm ID.1.5mm ID Tapered Quartz Injector. They are designed for organic solvents and non-HF matrices. Compatible with Spectro Blue EOP D-Torch 50-190-7034 (30-808-3600), Blue TI D-Torch 50-190-7036 (30-808-3629) and Arcos II SOP, Blue SOP & Green SOP/DSOI D-Torch 50-190-7035 (30-808-3614). When replacing your injector, it is recommended to replace the injector ferrule (31-808-2962), on average every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Outer Tube for D-Torch, SpectroBlue TI
Quartz Outer Tube for D-Torch. Compatible with Spectro (Ametek) Blue TI D-Torch (30-808-3629, 501907036). The D-Torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness and a lower cost of ownership. With the D-Torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, and store in original box.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion SeaSpray DC Nebulizer 0.4mL/min with 1,500mm tubing, Includes NFTS-075 UniFit Connector with 0.75mm ID x 1.3mm OD x 1500mm long tubing (1 piece), and 70-803-1311 Gas Fitting with Ratchet Nebulizer connector
SeaSpray DC Nebulizer 0.4 mL/min, includes UniFit Connector with 0.75mm ID x 1.3mm OD x 1500mm long tubing (1 piece) and DC Gas Fitting Type 41 with ratchet connector (1 piece). Compatible with Shimadzu 2030 ICP-MS.Optimum nebulizer gas flow rate is 0.7 L/min and sample flow rate is 0.4 mL/min. Recommended not to exceed optimum 0.4 mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 0.7 L/min gas flow rate. Can tolerate up to 20% TDS. We recommend the use of the Elegra Argon Humidifier to achieve best performance with high TDS.Replacement parts include P/Ns NFTS-075 and 501907301.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Mixing/Separation Assembly
Complete modular unit, consisting of: two mixing manifolds with tubing adapters K and M. A gas-liquid separator with a PTFE membrane 5 spare PTFE membranes 1 PTFE tube 110mm long, and 1 PTFE tube 300mm long. Can be used with AA, ICP-OES, ICP-MS and Flow Injection Mercury Systems.
Perkin Elmer US LLC High-Sensitivity GemTip Plastic Body Nebulizer Complete Assembly for AAnalyst
A complete GemTip High-Sensitivity plastic body nebulizer featuring Kalrez o-rings and plastic needle with Sapphire tip. This nebulizer was designed to obtain optimum sensitivity, detection limits and precision with flame atomic absorption for both air-acetylene and nitrous oxide-acetylene flames. This assembly includes: Capillary Tubing, Qty. 1 (09908265) Fine Adjustment Nut, Qty. 1 (N0371492) Gland Nut, Qty. 1 (N0371505) PTFE Tubing, Qty. 1 (09985708) Capillary Assembly for High-Sensitivity GemTip Nebulizers, Qty. 1 (N0371522) O-Ring for Capillary Assembly, Qty. 1 (09926083) Impact Bead for High-Sensitivity GemTip Nebulizer, Qty. 1 (B0505086) O-Ring for Nebulizer Body, Qty. 1 (09902015) Body Assembly for High-Sensitivity Nebulizer, Qty. 1 (N0370399) Locking Nut, Qty. 1 (N0371493) Spring, Qty. 1 (09902473) Connector Nut, Qty. 1 (N0371485) Magnet Holder Assembly, Qty.1 (N1010215) This nebulizer is compatible with the PerkinElmer AAnalyst 200/400*, AAnalyst100/300/700/800, and Models
Perkin Elmer US LLC Standard Glass Twister Spray Chamber with Helix for Optima 4300/5300/7300 V
The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully controlled to ensure smooth draining and improved precision. The baffle is cut at a sharp angle so that a large cross-section of the spray chamber is sampled, ensuring representative sampling and reduced matrix effects. Although this spray chamber isn't hydrofluoric acid-resistant, precision is considered excellent and purity is considered good. Material: Borosilicate glass Volume: 50 mL Low RSD's due to highly accurate construction Application uptake range 0.2 to 3.0 mL/min Produces smaller mean droplet size than standard spray chamber Positive stop for reproducible nebulizer insertion Convenient UniFit™ drain connector
Perkin Elmer US LLC GemTip Cross-Flow II Nebulizer for Optima 2x00/4x00/5x00/7x00
This nebulizer uses chemically resistant GemTips made of sapphire and ruby in a chemically resistant end cap (N0690676). It is included in the Quick-Change Torch Module with Scott Spray Chamber and GemTip Cross-Flow II Nebulizer for Optima 2x00/4x00/5x00/7x00 DV (N0770606) and the Scott/Cross-Flow II Sample Introduction Kit for Optima 2x00/4x00/5x00/7x00 DV (N0770731).
Perkin Elmer US LLC Standard Organics Glass Twister Spray Chamber with Helix for Optima 2x00/4x00/5x00/7x00 DV/8x00
The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully controlled to ensure smooth draining and improved precision. The baffle is cut at a sharp angle so that a large cross-section of the spray chamber is sampled, ensuring representative sampling and reduced matrix effects. Although this spray chamber isn't hydrofluoric acid-resistant, precision is considered excellent and purity is considered good. Material: Borosilicate glass Volume: 50 mL Low RSD's due to highly accurate construction Application uptake range 0.2 to 3.0 mL/min Produces smaller mean droplet size than standard spray chamber Positive stop for reproducible nebulizer insertion Convenient UniFit™ drain connector
Perkin Elmer US LLC Alumina Injector, 1.2 mm I.D. for Optima 2/4/5/7x00 DV
This Alumina Injector is for use with Optima 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Perkin Elmer US LLC Quartz Baffled Cyclonic PC3 Spray Chamber for Optima 2x00/4x00/5x00/7x00 DV/8x00
The quartz baffled cyclonic spray chamber features a 7 mm internal baffle, drain line, and injector connection. It's designed for all-purpose, non-hydrofluoric acid applications. The spray chamber provides excellent sensitivity, stability and low blanks.