Automated Coverslippers and Accessories
Electron Microscopy Sciences Hybrislip™ Thin Covers, 60 x 22 mm
HybriSlips are flexible, ready-to-use thin (0.25 mm) covers for glass slides that minimize fluid friction and facilitate uniform reagent distribution. The RNase free, hydrophobic covers will not trap or bind probes to their surfaces like coverglass. Working surfaces are protected with clean release liners to prevent RNase contamination. Hybrislips remain flat and will not curl, even at high temperatures and are ideally suited for in situ hybridization, in situ PCR and hybridization to genomic arrays on glass slides.
Size: 60 x 22 mm
Thickness: 0.25 mm
Electron Microscopy Sciences LifterSlip™ Premium Printed Coverglass, 25 x 42 mm 1 OZ
LifterSlip offers a simple solution to the problem of hybridization non-uniformity. An innovative raised edge design provides separation and allows for even dispersal of hybridization solution between the DNA chip and coverslip. LifterSlips allow for increased data quality by eliminating gradients caused by floating standard coverslips on hybridization solutions. The printed bars allow for easy injection of hybridization solution under the pre-positioned coverslips. Capillary attraction ensures that LifterSlip stays in place.
LifterSlip is #2 thickness (0.20-0.22 mm) and the bar height is 0.04-0.06 mm.
Size: 25 x 42 mm
Electron Microscopy Sciences Thermanox Cover Slip 10.5 x 22 mm
NUNC Brand Thernanox, or TMX coverslips are made from a polymer (in the polyolefin family) that is highly resistant to most chemicals. Thermanox plastic is resistant to alcohols, aldehydes, hydrocarbons, dilute acids (<10%) and dilute alkalis (<2%). TMX has limited resistance to chlorinated hydro-carbons, however, it is not resistant to concentrated acids or bases.Thermanox plastic is a flexible, trans-parent polymer that can be sectioned using a microtome and is able to withstand high temp-eratures (temperature range –70 degree C to +150 degree C). Thermanox coverslips are culture treated on one side for enhanced cell attachment and growth. The treated side is packaged face up toward the label.
Petroleum Analyzer Corporation CRM for Viscosity 500 ml S200
CRM Viscosity S200, appr. 180 mm²/s @40°C; 18 mm²/s @ 100°C, 500ml
Electron Microscopy Sciences LifterSlip™ Premium Printed Coverglass, 25 x 36 mm 1 OZ
LifterSlip offers a simple solution to the problem of hybridization non-uniformity. An innovative raised edge design provides separation and allows for even dispersal of hybridization solution between the DNA chip and coverslip. LifterSlips allow for increased data quality by eliminating gradients caused by floating standard coverslips on hybridization solutions. The printed bars allow for easy injection of hybridization solution under the pre-positioned coverslips. Capillary attraction ensures that LifterSlip stays in place.
LifterSlip is #2 thickness (0.20-0.22 mm) and the bar height is 0.04-0.06 mm.
Size: 25 x 36 mm
Electron Microscopy Sciences Rat Tail Collagen German Glass Coverslips #1.5, 18 mm
Coated with rat tail type I collagen on top of poly-d-lysine layer. Sterilized by radiation, ready to use. Tested for cell and neuron cultures. User manual included.
Diameter: 18 mm
Electron Microscopy Sciences Rat Tail Collagen German Glass Coverslips #1.5, 22 mm
Coated with rat tail type I collagen on top of poly-d-lysine layer. Sterilized by radiation, ready to use. Tested for cell and neuron cultures. User manual included.
Diameter: 22 mm
Electron Microscopy Sciences Rat Tail Collagen German Glass Coverslips #1.5, 22 mm
Coated with rat tail type I collagen on top of poly-d-lysine layer. Sterilized by radiation, ready to use. Tested for cell and neuron cultures. User manual included.
Diameter: 22 mm
Electron Microscopy Sciences Rat Tail Collagen German Glass Coverslips #1, 24 mm
Coated with rat tail type I collagen on top of poly-d-lysine layer. Sterilized by radiation, ready to use. Tested for cell and neuron cultures. User manual included.
Diameter: 24 mm
Electron Microscopy Sciences Hybrislip™ Thin Covers, 24 mm x 60 mm
HybriSlips are flexible, ready-to-use thin (0.25 mm) covers for glass slides that minimize fluid friction and facilitate uniform reagent distribution. The RNase free, hydrophobic covers will not trap or bind probes to their surfaces like coverglass. Working surfaces are protected with clean release liners to prevent RNase contamination. Hybrislips remain flat and will not curl, even at high temperatures and are ideally suited for in situ hybridization, in situ PCR and hybridization to genomic arrays on glass slides.
Size: 24 mm x 60 mm
Thickness: 0.25 mm
HARVARD BIOSCIENCE INC 25MM COVER GLASS RND 100/PACK
Total order minimum requirement of $500 per supplier requirements. A $25.00 order fee will be applied if entire order is less than the $500 minimum requirement.
Thomas Scientific Microscope Cover Glass, 22mm x 40mm, # 1 Thickness, 1 oz./Vacuum Pack, 10 Packs/Box (10 oz.)
Our microscope cover glass is packaged: 1 oz per pack, 10 packs/box (10 oz). Each flip top pack contains a desiccant and is wrapped in aluminum to prevent sticking. Available in 3 thicknesses No. 1 : 0.14mm No. 1.5 : 0.175mm No 2 : 0.21mm
Alkali Scientific ASI™ Square Glass Coverslips, 24X24mm, 100/sleeve, No. 1.5, 0.17-0.19mm, 1oz, 100/pk
ASI™ Square Glass Coverslips are made from high-quality glass that is non-cytotoxic and manufactured in 100,000 grade clean rooms. Coverslips are 24X24mm. ASI™ cover glass is available with a thickness of No. 1 0.13-0.17mm, No. 1.5 0.17-0.19mm, and No. 2 0.19-.23mm. Optically Clear Glass Cover slip for microscope slides Packed in 100/sleeve or 10 packs of 100, 1000/cs Glass Coverslips are ideal for: Confocal Microscopy Confocal Laser Scanning Microscopy (CLSM) Fluorescence Microscopy Green Fluorescence Protein (GFP) Fluorescence Resonance Energy Transfer (FRET) Immunofluoresence Microscopy Phase Contrast Microscopy Polarized Light Microscopy Differential Interference Contrast (DIC) Multi Photon Laser Scanning Microscopy (MPLSM) High Resolution Image Analysis Infrared Imaging Calcium Imaging
Alkali Scientific Round Cover Glass, Cover Slips for use within 6 Well TC Plates, 25mm Diameter, Thickness: 0.19-0.22mm, Pre-cleaned, 10 oz, 1000/cs
ASI™ Round Cover Glass are high quality imported glass, and are non-cytotoxic. They are manufactured in 100,000 grade clean room and resistant to organic solvents and autoclaved by high temperature. Applicable to confocal experiment. Thickness: 0.19-0.22mm.