Embedding Accessories
Ted Pella Inc DISPOSABLE BASE MOLDS
Disposable Base Molds, 37 x 24 x 10mm, Offer ease and convenience of operation, Excellent thermal exchange, Smooth interior finish
Andwin Scientific TSE TEK CMPND OCT 4OZ BT,12/CS
The Tissue-Tek® optimum cutting temperature (O.C.T.) solution is composed of water-soluble glycols and resins that give a specimen matrix for cryostat sectioning at temperatures of –10°C (14°F) and below. This product does not leave any residue on slides during and after staining prcoess. It is packaged in a 118mL (4oz.) bottle and is sold in a case of 12.
Leica Biosystems Biopsy Pads, 25 x 32 mm (1 x 1.25 in) - For use with standard biopsy cassettes
Biopsy Pads are thin, open-celled foam pads sized 25 x 32 mm (approx. 1 x 1.25 in) designed to secure small tissue specimens in standard biopsy cassettes during fixation and processing. Presaturating the pads in fixative reduces specimen floating and artifacts, while the thin construction minimizes pressure on unfixed tissue and reduces the risk of tissue sticking or fiber separation during embedding. Supplied in packs of 500.
- Thin open-celled foam that permits thorough fluid transfer around specimens.
- Presaturate in fixative to prevent specimen floating and reduce artifacts.
- Thin construction minimizes pressure on unfixed tissue.
- Reduces the risk of tissue sticking and fiber separation during embedding.
- Sized to fit standard 1 x 1.25 in biopsy cassettes.
- Supplied in a pack of 500 pads for high-volume use.
Adaptive Science Tools Microinjection Mold I-34
Six ramps used for micro-injection. Both sides are at a 90-degree angle firmly orienting the embryo.
Polysciences, Inc. Peel-A-WayEmbedding Mold (Square - S22)
Peel-a-Waya Embedding Mold (Square - S22). Disposable paraffin molds designed to in.Peel-a-Way in. from the solidified embedded block. Be sure to consider Polyciences' Polyfin and Peel-a-Way Micro-Cut Paraffin for use with Peel-a-Way molds. May also be used for epoxy and acrylic resin embedding procedures. Features: - Polyethylene - 22mm x 22mm square - 20mm deep - 288 molds per case
Electron Microscopy Sciences Disposable Base Mold, 15 x 15 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 15 x 15 mm
Height: 5 mm
Electron Microscopy Sciences Disposable Base Mold, 7 x 7 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 7 x 7 mm
Height: 5 mm
Andwin Scientific INTER CRYOMOLD 1200/CS
Tissue-tek Intermediate Cryomold, Molds disposable Plastic cryomolds create a uniformly shaped flat-surface specimen block when used with O.C.T compound 25608-930 for frozen sectioning, 15L x 15W x 5mm dia., 1200/CS
Electron Microscopy Sciences T-Sue™ Precast Paraffin Block, 4 mm
Precast T-Sue Microarray paraffin blocks are used to construct a tissue array block in minutes by simply punching the donor tissue cores and inserting into a pre-made paraffin recipient block. It is an easy, convenient, and low cost method for constructing paraffin tissue microarrays. The blocks are made of paraffin and the cassettes are made of acetal. The cassette is permanently bonded to the block and has consistent core diameters. It is ready to accept cores from the donor block.
Kit includes 6 Precast T-Sue Paraffin blocks and two punch needles with stylet.
Size: 4 mm
Capacity: 15 cores
Electron Microscopy Sciences Slide Duplicating withCover Slip
The same design as above 70170 but with the addition of three round cavities which are 17 mm in diameter and 1 mm deep.
Electron Microscopy Sciences 25X32mm Rectangle Foam Pads, 1000/pk
A cellular polyester blue foam that has uniform air pockets throughout the pad for optimal fluid flow. It prevents either small or fragmented tissue specimens from being lost. To use simple place small samples or specimen fragments between the two pads and place the specimen in a cassette or capsule.
Electron Microscopy Sciences T-Sue™ Microarray Mold Kit, 1 mm
T-Sue array molds are specifically designed to be simple, easy to use and inexpensive. The tissues can be analyzed in consistent conditions enhancing the efficiency of the research. Allow you to perform TMAs more quickly with excellent results. By using array molds, you can process up to 170 specimens onto one single slide in very little time.
Made of silicone, these molds can withstand temperatures between -100 deg C to +250 deg C and be reused hundreds of times without losing their flexibility.
Each kit includes one T-Sue array mold and four punch needles with stylet.
Size: 1 mm
Capacity: 170 cores
Andwin Scientific SQUARE MOLD 22X22MM 288/CS
The square Peel Away Disposable Embedding Molds are ideal for plastic or paraffin embedding. Block trimming is no longer required. This product has a dimension of 22 x 22 millimeters. It is sold in a case of 288.