Embedding Accessories
Med Vet International Draxxin KP (Tulathromycin and Ketoprofen) Injectable Solution Antibiotic and Anti-Inflammatory 100mL
VET LICENSE NEEDS TO BE PROVIDED IN 3-4 BUSINESS DAYS OR ORDER WILL BE CANCELLED
Draxxin KP (Tulathromycin and Ketoprofen) Injectable Solution Antibiotic and Anti-Inflammatory 100mL
Electron Microscopy Sciences TI Embedding Rings
The most difficult step of cross-sectional thinning is the mechanical preparation of the sample, i.e. cutting a cross section and then embedding it into an appropriately designed ring. We now offer a convenient, specially designed embedding ring for cross-sectional samples.
Using this ring, embedding cross sections is greatly simplified, since the samples do not need to be glued together prior to embedding. In order to fix the sample(s) in the ring, it is deformed mechanically by an appropriate tool at the two points marked by the arrows. This deformation will both hold the sample in the ring and press both sample pieces together before gluing. Ti disc is also offered for embedding bulk samples of brittle material for plan-view TEM investigations. The rings come in 5 sizes-0.6, 0.8 1.0, 1.2, 1.3 mm.
Electron Microscopy Sciences Peel Away Disposable Embedding Mold Square Shape, 22 x 22 mm
Peel Away Disposable Embedding Molds are used for plastic or paraffin embedding. No block trimming needed. Inside fingers hold ID slip which becomes embedded in the block for positive permanent identification.
Size: 22 x 22 mm
Electron Microscopy Sciences ERL 4221 Cycloaliphatic Epoxide Resin 225 ML
Due to the supply shortage of ERL-4206 ERL-4221 has now been specially formulated to replace it. ERL 4206 is one of the main components of the low viscosity (Dr. Spur) embedding resin kit. ERL-4221 is a Cycloaliphatic Epoxide Resin.
Electron Microscopy Sciences Paraffin TMA Arraymold Kit 2 (B +C), 1.5 and 4.0 mm diameter
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) with less time while maintaining excellent results. Process up to 150 specimens onto one single slide with very little time consuming, minimal technical training. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process.
Arraymolds allow pathologist or researcher to view many different samples on the same single slide.
Helpful in finding IHC markers for control or quality assurance from hundreds of samples.
Staining markers will be more consistent when hundreds of samples are on one slide.
Used less costly antibody.
Arraymold kit is small enough to be stored in a drawer.
Rubber arraymold can be reused many times without losing its flexibility. his package includes two Arraymold kits, Kit B and Kit C.
Diameter: 1.5 and 4.0 mm
Electron Microscopy Sciences Paraffin TMA Arraymold Kit 2 (A +B+C), 1.5, 2.0, and 4.0 mm diameter
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) with less time while maintaining excellent results. Process up to 150 specimens onto one single slide with very little time consuming, minimal technical training. The DVD instruction is accompanying with each kit, will step by step guide you to perform through the entire TMAs process.
Arraymolds allow pathologist or researcher to view many different samples on the same single slide.
Helpful in finding IHC markers for control or quality assurance from hundreds of samples.
Staining markers will be more consistent when hundreds of samples are on one slide.
Used less costly antibody.
Arraymold kit is small enough to be stored in a drawer.
Rubber arraymold can be reused many times without losing its flexibility. This package includes three Arraymold kits, Kit A, Kit B and Kit C.
Diameter: 1.5, 2.0, and 4.0 mm
Leica Biosystems PARAFREE DISPOSABLE BASE MOLD
Disposable Base Molds have been designed to be compatible with any currently available cassette. The orientation of the specimen is made easier due to the transparency of the mold, while its rounded corners allow for easy block removal and paraffin ribbon continuity. Built up side walls reduce risk of paraffin seepage during embedding. Available in boxes of 400 or cases of 1600.
Electron Microscopy Sciences Cold Embedding Silicone Mold for Acylic Resin 25 mm
This mold is for acrylic resins only and the best mounting cup for all of our acrylic resins. The flexible silicone rubber makes it very easy to remove the mount from the mounting cup.
Diameter: 25 mm
Electron Microscopy Sciences Cold Embedding Silicone Mold for Acylic Resin 30 mm
This mold is for acrylic resins only and the best mounting cup for all of our acrylic resins. The flexible silicone rubber makes it very easy to remove the mount from the mounting cup.
Diameter: 30 mm
Electron Microscopy Sciences Aluminum Base Mold, 50 x 50 x 30 mm
This extra large square base mold offers optimal thermal conductivity. Features a well polished surface for easy block removal. It will accommodate most samples.
Electron Microscopy Sciences Cold Mounting Phenolic Ring Mold, 0.25"
Impregnated phenolic, ¾" high.
Size: ¼"