Bioprocess System Bags and Liners
Thermo Scientific™ RockIt Rocking Bioreactor BioProcess Container (BPC)
The Thermo Scientific™ RockIt Rocking Bioreactor BioProcess Container (BPC) is composed of Aegis5-14 single web, multi-layer plastic film, with dimensions optimized for General Electric Health Care (GEHC) Wave 20/50 and Wave 25 equipment.
Thermo Scientific™ Sampling Manifold Accessory for HyPerforma™ Single-Use Bioreactors, with Luer locks
The Sterile Sampling Manifold is an accessory for the HyPerforma Single-Use Bioreactors and is available to weld onto the sample line to take sample sets.
Corning™ Single-Use Bags for HYPERStack™ Vessels
Used to add media, trypsin, or quenching substrates to complete cell culture in an entirely closed solution
FINESSE SOLUTIONS (SUD ECHO ONLY) DYNADRIVE BIOREACTOR 500L SST
NC3821519 DYNADRIVE BIOREACTOR 500L SST
Bellco Glass, Inc. 3/8 Harvest Port Assembly , 10L For 10L Bioreactor Systems"
SST Harvest Port Assembly. MADE IN THE USA. For 10L Bioreactor Systems - English ThreadsFor Omni Vessels - 1964-88410Fits into 3/8" Holes in HeadplateMaterial: 316L SST with Electropolish finish - inside & outDimensions: .250" OD x 19 1/4" Overall LengthInsertion Length: 18"With Hose BarbsSupply with SST nut & O-ring
Sigma Aldrich Fine Chemicals Biosciences NovaSeptum(R) High Purity Unit Bacterial counting and sampling from bioreactors |
NovaSeptum(R) High Purity Unit Bacterial counting and sampling from bioreactors |
Bellco Glass, Inc. Stainless Steel Harvest Port Assembly , 3/8 For 3L Bioreactor System
Stainless steel harvest port assembly 3/8 for 3l bioreactor systems. MADE IN THE USA Fits .375" hole in headplate Material: SST 316l ra 32 finish or better Tubing: 316l 1/4" od x 5/32" id Dimension: 10 11/16" oal Insertion length: 9 1/4" Supply with O-ring & SST nut
Bellco Glass, Inc. 3-Port Harvest Assembly ,8L For Vertical Side Arm Vessels
MADE IN THE USA. Material: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 15" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" OD) - 1" above slug, .975" below Supply with 45mm PP blue open top screw cap & white silicone gasket
Bellco Glass, Inc. 3-Port Harvest Assembly ,15L For Vertical Side Arm Vessels
Size: for standard Over Head Drive 15l vesselTo fit gl45 vertical sidearms. MADE IN THE USA. Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions:harvest tube (3/8"od)-1"above slug,16" insertion length, approxAdditon tube (1/4"OD) - 1" above slug, 2 21/64" below Vent tube (1/4" OD) - 1" above slug, .975" below Supply with 45mm PP blue open top screw cap & white silicone gasket
Bellco Glass, Inc. Low Profile 3-Port Harvest Assembly ,3L For Vertical Side Arm Vessels
MADE IN THE USA. Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 8 3/8" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm PP blue open top screw cap & white silicone gasket
Ace Glass, Inc. 1/2" OD PTFE covered copper cooling coil, 50L cylindrical vessel, 12" flange
1/2 O.D. PTFE covered copper cooling coil with 12 flanges, for use with a 50L cylindrical vessel.
Ace Glass, Inc. 3/8" OD PTFE covered copper cooling coil, 50L spherical vessel, 8" flange
3/8 O.D. PTFE covered copper cooling coil with 8 flanges, for use with a 50L spherical vessel.
Bellco Glass, Inc. Stainless Steel Curved Harvest Tube, 36L 1/4OD x 24" - Flat Bottom Vessel"
Stainless steel curved harvesting tube for 36l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. MADE IN THE USA. Size: 36l Dimensions: 1/4" x 5/32 x 24"L
Bellco Glass, Inc. Stainless Steel Curved Harvest Tube,8L 1/2OD x 20"L - Round Bottom Vessel"
Stainless steel curved harvesting tube for 8l round bottom omni vessels. MADE IN THE USA. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better outside only electropolish finish. Size: 8l Dimensions: 1/2" x .430 x 20"L
Bellco Glass, Inc. Stainless Steel Curve Harvest Tube, 8L 1/4OD x 20"L-Round Bottom Vessels"
Stainless steel curved harvesting tube for 8l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. MADE IN THE USA. Size: 8l Dimensions: 1/4" x 5/32 x 20"