Bioprocess System Accessories
Ace Glass, Inc. Bushing only, plunger valve, #15, O-ring included
Bushing only, plunger valve, #15, O-ring included
Ace Glass, Inc. 3000mL, one-piece jacketed pressure reactor with #25 center, (4)#15, (1)#7 side necks, 0-10mm valve and 28/15 ball joint bottom outlet, 28/15 ball joint inlet/outlet, complete with addition funnel, condenser, manifold & stirring assemblies
Complete, one-piece 3000mL jacketed pressure reactor is designed to perform low to moderate positive pressure reactions, synthesis, and catalysis. Flask has a #25 center neck, (4) #15 side necks, and (1) #7 side neck. Flask bottom outlet is 0-10mm 28/15 ball joint. Jacket inlet/outlet has a 28/15 o-ring ball joint. Rated 45 PSI at 100 degrees C. Reactor system includes addition funnel, condenser, manifold, and stirring assemblies.
Chemglass Life Sciences Spray Ball, PTFE, 24/40, 18mm Ball O.D., For Use with 3/8" PTFE Tubing
Spray Ball, PTFE, 24/40, 18mm Ball O.D., For Use with 3/8" PTFE Tubing. This fluid driven spray ball gives nearly 360¿ spray coverage and is a convenient way to clean cylindrical reaction vessels from 300mL to 5L without dismantling the entire set-up. It can also be used as a wall-wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the rotating spray head to be easily removed for inspection and maintenance. Top compression fitting is for connection to 3/8¿ PTFE tubing.PLEASE NOTE: CONNECTING ADAPTERS AND 3/8¿ PTFE TUBING ARE SOLD SEPARATELY.
Cowie Technology Corporation PTFE NPT FIT 1/2NPT W/14MM BOR
This item has a minimum qty of 5 per supplier requirements.
Bellco Glass, Inc. Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Heating blanket - benchmark Flask size: 3l Watts: 295 Heating @ 5 watts per sq in Special Sale Item
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Heating blanket - benchmark Flask size: 3l Watts: 295 Heating @ 5 watts per sq in Special Sale Item
Bellco Glass, Inc. 2-port 45mm cap assembly, 8lFor 8l 1964 style ohd vesselsLong tube: 1/4"od x 16 1/4"Short tube: 1/4"od x 2.5/32"All tubes extended up 1.0" above the cap slugSupply 45mm s/cap & white silicone liner
2-port 45mm cap assembly, 8lFor 8l 1964 style ohd vesselsLong tube: 1/4"od x 16 1/4"Short tube: 1/4"od x 2.5/32"All tubes extended up 1.0" above the cap slugSupply 45mm s/cap & white silicone liner
Ace Glass, Inc. Tube, pressure, 35mL, 150psi, 25.4mm OD, 17.8cm long, complete with#15 front-seal plug
35mL glass pressure tube with #15 Ace-Thred, rated at 150psig at as much as 120C. Includes #15 front-seal plug. Dimensions: 25.4mm O.D. x 17.8cm long.
Chemglass Life Sciences PTFE Jacketed Stainless Steel Baffles Only: Overall Baffle Length: 410mm, Effective Baffle Length: 220mm, Baffle Width x Depth (mm): 7 x 10, PTFE Compression Fitting: 1/4", Fits Reactor Size: 1L, 2L, & 4L
PTFE Jacketed Stainless Steel Baffles Only: Overall Baffle Length: 410mm, Effective Baffle Length: 220mm, Baffle Width x Depth (mm): 7 x 10, PTFE Compression Fitting: 1/4", Fits Reactor Size: 1L, 2L, & 4L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed Stainless Steel provides excellent strength and chemical durability. Pictured is a fully assembled baffle system, but this item is BAFFLE ONLY.
Bellco Glass, Inc. Bell-Flo iob assembly was designed to be used with the bell-flo vessel with bottom indents and 3 vertical baffles for optimal mixing. Rugged stainless steel ptfe internal bearing impeller assemblies utilize a wing style impeller blade that increases mixin
Bell-Flo iob assembly was designed to be used with the bell-flo vessel with bottom indents and 3 vertical baffles for optimal mixing. Rugged stainless steel ptfe internal bearing impeller assemblies utilize a wing style impeller blade that increases mixin