Single Use Bioreactor Vessels
Chemglass Life Sciences Vessel, Bio Reactor, 36L, Graduated, 100-440 GPI Thread CN, (6) Vertical GL-45 SN's
Vessel has six vertical GL-45 threaded side necks and a 100mm threaded center neck.The 3 and 6 liter vessels are low profile to maximize incubator space.Supplied complete with (6) solid GL-45 caps and (6) pouring rings.
Chemglass Life Sciences Temperature Controller for CHEMcell Bioreactor Rocker Trays
J-KEM Temperature Controller used to control the temperature of the integral heating pad of the CHEMcell culture bag tray.The controller is used for both tray sizes, CLS-1200-200 and CLS-1200-300, as well as the 4 watt filter vent heater, CLS-1200-FH.
Chemglass Life Sciences 3L Unjacketed Bio Reactor Vessel
This adapter can be used to add fluids or gases to the bio reactor.The portion of the adapter that is within the reactor has a short drip tip tube that can accept tubing to reach further into the listed capacity reactor.Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences 15L Unjacketed Bio Reactor Vessel
15L Unjacketed Bio Reactor Vessel. Vessels are constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Ace Glass, Inc. 12L complete reactor assembly. Tall support raises mantle36" above the floor.
12L complete reactor assembly includes flask, self-standing mechanical or air motor, flat-sided powder funnel, slow speed operation motor control, rugged steel reinforced PTFE stirring rod, and a tall mantle support. This complete self-supporting pilot plant assembly needs only to be located near coolant and electrical outlet. When not in use the entire assembly can be intact without breakdown.
Ace Glass, Inc. 2L Instatherm filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 130mm IDx180mm depth, with CAPFE O-ring and power cord, 120v/8amp max
2L Instatherm coated filter reactor body with a 100mm I.D. grooved top flange for connection to a reaction head with the use of a quick release clamp, and a #80 Ace-Thred bottom thread for use with a bottom adapter with a filter support and drain valve. Instatherm provides safer, rapid heating, and can be operated at 115v with ACE Proportional Temperature Controllers, or with a Powerstat. Reactor body supplied with a CAPFE o-ring and a power cord. Dimensions: 130mm I.D. x 180mm D.
Ace Glass, Inc. 5000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
5000mL, two-piece jacketed pressure reactor, complete with28/15 ball joint inlet/outlets, 150mm head with #15 center, (4)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and super magnet stirring assembly
Ace Glass, Inc. 600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
Ace Glass, Inc. 1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
Ace Glass, Inc. 3L Instatherm filter reactor body with 150mm ID grooved top flange, #80 bottom thread, 150mm IDx185mm depth, with CAPFE O-ring and power cord, 120v/9amp max
3L Instatherm coated filter reactor body with a 150mm I.D. grooved top flange for connection to a reaction head with the use of a quick release clamp, and a #80 Ace-Thred bottom thread for use with a bottom adapter with a filter support and drain valve. Instatherm provides safer, rapid heating, and can be operated at 115v with ACE Proportional Temperature Controllers, or with a Powerstat. Reactor body supplied with a CAPFE o-ring and a power cord. Dimensions: 150mm I.D. x 185mm D.