Single Use Bioreactor Vessels
Thermo Scientific™ 5 L DynaDrive™ Bioreactor Stand 120 V Puck Sensor Version
DynaDrive single-use bioreactor stand configured for 120 V operation and puck sensors. Compatible with 5 L DynaDrive Bioreactor Bioprocess Container (BPC) Puck Sensor Version. Bioreactor stand holds, provides heating, and enables tubing management for the bioprocess container.
Thermo Scientific™ 5 L DynaDrive™ Bioreactor Stand 120 V Traditional Probe Sensor Version
DynaDrive single-use bioreactor stand configured for 120 V operation and traditional probe sensors. Compatible with 5 L DynaDrive Bioreactor Bioprocess Container (BPC) Traditional Probe Sensor Version. Bioreactor stand holds, provides heating, and enables tubing management for the consumable.
Thermo Scientific™ 5 L DynaDrive™ Bioreactor Stand 240 V Puck Sensor Version
DynaDrive single-use bioreactor stand configured for 240 V operation and puck sensors. Compatible with 5 L DynaDrive Bioreactor Bioprocess Container (BPC) Puck Sensor Version. Bioreactor stand holds, provides heating, and enables tubing management for the bioprocess container.
Thermo Scientific™ 5 L DynaDrive™ Bioreactor Stand 240 V Traditional Probe Sensor Version
DynaDrive single-use bioreactor stand configured for 240 V operation and traditional probe sensors. Compatible with 5 L DynaDrive Bioreactor Bioprocess Container (BPC) Traditional Probe Sensor Version. Bioreactor stand holds, provides heating, and enables tubing management for the consumable.
Accuflow Systems Biosimplex Gamma Irradiated Bottle Assembly System 250ml 2 Port I0/pk
Biosimplex Gamma Irradiated Bottle Assembly System 250ml 2 Port I0/pk
MilliporeSigma Single-use 3L stirred tank bioreactor (green), 2/pk
A single-use, stirred tank bioreactor designed for the non-GMP cultivation of mammalian cell lines. Its rigid design includes a semi-hemispherical shaped polycarbonate vessel, a multi-port high-density polyethylene (HDPE) headplate, a scoping marine impeller, both open pipe and sintered spargers, weldable C-Flex tubing, and all necessary gas inlet and outlet filters.
Biosurface Technologies Corp Anaerobic CDC Biofilm Reactor, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.
"The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.
Ace Glass, Inc. 1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
1L jacketed filter reactor body with 100mm ID grooved top flange, #80 bottom thread, 100mm IDx180mm depth, with CAPFE O-ring, #11 Ace-Thred inlet/outlet connections, use with 3/8in ID tubing, pressure rated at 35 psi.
Chemglass Life Sciences 500mL ChemRxnHub Process System Complete with Glassware, Stand, OHS 100 Advance Motor, and Manifold/Drain System
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Bellco Glass, Inc. Over Head Drive Drive Vessel,36L Six Vertical Sidearms
Manufactured from type 1 class a Borosilicate glass. Includes 6 45mm polypropylene blue screw caps and pouring rings, also 1 100mm polypropylene blue cap for the center. Suitable for all cell culture fermentation. Compatible with bellco over head drive and magnetic stirrers. MADE IN THE USA. Specifications:Material: Type 1 Class A Borosilicate Glass100mm Center NeckBaffles: 0Sidearms: 6OD x OAH: 410 x 535mm
Reprocell ABLE BIOTT 30 mL Disposable Bioreactor
The ABLE Biott 30 mL Disposable Bioreactor is a single-use bioreactor system for cell culture and microbial fermentation. It has a 30 mL working volume and is made of animal-derived component free (ADCF) materials. The bioreactor features an integrated impeller, integrated sparger, and integrated optical sensors for pH and DO. It is compatible with the ABLE Biott bioreactor controller. The bioreactor is sterile and ready-to-use out of the package. It is designed for process development and optimization in upstream bioprocessing workflows.
Ace Glass, Inc. 600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
600mL jacketed filter reactor body with 60mm ID grooved top flange, #50 bottom thread, 83mm IDx185mm depth, with CAPFE O-ring, 28/15 O-ring ball joint inlet/outlet connects, pressure rated at 35 psi.
Ace Glass, Inc. 3000mL jacketed pressure reactor, complete with #15 Ace-Thred inlet/outlets, 150mm Ace-Thred 6 neck head, 80mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
3000mL jacketed pressure reactor, complete with #15 Ace-Thred inlet/outlets, 150mm Ace-Thred 6 neck head, 80mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, bearing, condenser, addition funnel, clamp & O-rings
Ace Glass, Inc. 5000mL, two-piece jacketed pressure reactor complete with0-10mm valve and 28/15 ball joint bottom outlet, #15Ace-Thred inlet/outlets, 150mm 6 neck head, addition funnel, condenser, pressure manifold and stirring assembly
5000mL, two-piece jacketed pressure reactor complete with0-10mm valve and 28/15 ball joint bottom outlet, #15Ace-Thred inlet/outlets, 150mm 6 neck head, addition funnel, condenser, pressure manifold and stirring assembly