General Purpose Forceps and Tweezers
Available in a variety of sizes, styles, and configurations to support specific handling requirements, including pointed, blunt, rounded, curved, angled, or flat tips; plain or serrated gripping surfaces; scissor-style handles; self-closing designs; alignment guide pins; and protective foam, silicone, or PTFE-coated surfaces to enhance grip and minimize contamination or damage to sensitive components and materials.
Typical applications include manipulation of microscope coverslips, filter papers and discs, electronic components, precision mechanical parts, and other small or fragile items in controlled, industrial, research, and manufacturing environments. Excludes surgical, dissection, and other medical forceps intended for clinical procedures.
Electron Microscopy Sciences EMS Tweezers Style 000, SA steel, Flat edges, strong with radiused edges Tips
The tweezers are the Swiss highest quality. Antimagnetic/anti-acid SA low carbon austenitic steel tweezers are corrosion resistant. Anti-glare satin finish.
Material: SA Steel
Tips: Flat edges, strong with radiused edges
OAL: 120 mm
Electron Microscopy Sciences EMS Fiber Tip Tweezers Style 5, Type CF-PA66/CF30, 130 mm
The handles are made from Antimagnetic Steel and tips are synthetic fiber. Temperature Resistance: 375 degree F (190 degree C). Polyamide 66 with 30 wt% carbon fiber tips are heat stable -40 to 190C. Excellent tensile and flexural strength. Resistance to oils, non-polar solvents but not acids, alkalis, hot water. ESD safe. Good conductivity.
Material: CF-PA66/CF30
OAL: 130 mm
Tip width: 0.5 mm
Tip thickness: 0.6 mm
:
Electron Microscopy Sciences EMS Fiber Tip Tweezers Style 5X, Type CP-PEEK/CF30, 130 mm
The handles are made from Antimagnetic Steel and tips are synthetic fiber. Temperature Resistance: 375 degree F (190 degree C). Tips are high-performance polyetheretherketone (PEEK) with 30 wt% carbon fiber. Very hard, high tensile and flexural strength. Withstands 260-300 deg C. Excellent chemical resistance. EDS safe.
Material: CP-PEEK/CF30
OAL: 130 mm
Tip width: 0.8 mm
Tip thickness: 0.6 mm
:
Electron Microscopy Sciences EMS Tweezers Style OA, SA steel, Straight point with radiused outside edges, fine tips Tips
The tweezers are the Swiss highest quality. Antimagnetic/anti-acid SA low carbon austenitic steel is used where corrosion resistance and toughness are primary requirements. Anti-glare satin finish.
Material: SA Steel
Tips: Straight point with radiused outside edges, fine tips
OAL: 120 mm
Electron Microscopy Sciences EMS Tweezers Style 5TTH, SA steel, Anti-capillary, extra fine tips with locking ring Tips
The tweezers are the Swiss highest quality. Antimagnetic/anti-acid SA low carbon austenitic steel tweezers are corrosion resistant. Anti-glare satin finish. Useful for handling EM grids.
Material: SA Steel
Tips: Anti-capillary, extra fine tips with locking ring
OAL: 110 mm
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 127, 105 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Thin and square tips, straight.
OAL: 105 mm
Electron Microscopy Sciences EMS Tweezers Style 15ASW, Carbon Steel, 10 mm curved cutting jaws Tips
The tweezers are the Swiss highest quality.
Material: Carbon Steel
Tips: 10 mm curved cutting jaws
OAL: 115 mm
Electron Microscopy Sciences Rubis Nano Tweezers Style SS, 135 mm OAL
Ultra-modern nanotechnology closes even the tiniest of pores on the surface and this innovation has resulted in the cleanest tweezers surface ever produced. Made from the finest stainless steel grade, the Lotus effect repels dirt, oil, water and other liquids. These tweezers are a perfect companion in the clean room or any sensitive laboratory areas where contaminant free tools is required.
OAL: 135 mm
Electron Microscopy Sciences Smart Tweezers Quick-Test Auto-Scanning Tweezers
Precise, non-magnetic tips reliably contact smallest SMD. The Quick Test tweezers gives users an easy way to sort and evaluate loose components and to perform on-board measurements and debugging. Surface mount devices are usually tiny and without wire leads, making it much more difficult to test and identify SMD than conventional components. Precise tips, made of non-magnetic steel, are able to pick and reliably contact even the smallest SMD components, or take measurements from the device already mounted on a board. The probe can also be used to test conventional components with wire leads too short to insert into the test terminals.
The tweezers measures AC/DC voltage, resistance, continunity & diode test and has auto scanning mode and auto range. Testing pins are gold plated to reduce resistance and prevent rust. Lithium battery CR2032 is included. The tweezers will automatically identify whether component is a resistor, capacitor or diode.
Electron Microscopy Sciences Rubis Wafer Tweezers Style 43LB-8 Peek, 138 mm
For wafers handling. Made of PEEK an ESD safe soft, conductive fiber, with heat resistance up to 250°C. Clean-room compatible.
OAL: 138 mm
Width: 27 mm
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 574A, 145 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Flat and tips bent upward. Tip width: 6mm.
OAL: 145 mm
Electron Microscopy Sciences Rubis Ion Tweezers Style 3, 120 mm OAL
This innovation has resulted in a special coating surface on the tweezers which releases silver ions. These ions act as an anti-bacterial agent which helps protect the user from contamination of any pathogens. Unlike other methods, the use of ion technology does not give rise to any resistance. Consequently, it represents a risk-free method of guaranteeing hygiene, even at workstations where instruments are used by several different people.
Made from finest stainless steel grade, these tweezers are perfect companions for your daily use in the laboratory.
We recommend that safety gloves still be used whenever handling any infectious materials.
OAL: 120 mm
Electron Microscopy Sciences EMS Surface Mount Tweezers Style SM 115, 120 mm
These tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. They offer comfort and smooth handling and have a satin antiglare finish with an ergonomic design. Very fine rounded tips with groove inside on a 30-degree angle. For positioning cylindrical objects.
Electron Microscopy Sciences Dumont Tweezers Positive Action Style 4, High Precision, Inox 02, Polished Finish, 110 mm OAL
Style 4 tweezers have very thin tips. Standard magnetic stainless steel composed of C, Mn, Cr and Si. Not as hard as carbon steels. Resist Temperatures of 400 deg C. Cannot be sterilized.
Grade: High Precision
Material: Inox 02
Finish: Polished
OAL: 110 mm
Tip width: 0.17 mm
World Precision Instrument Economy Tweezers #1, 11cm, 0.45x0.55mm Tips, packs of 6
Student fine tweezers are made of quality stainless steel. These tweezers are useful for general dissections where ultra fine tips are not necessary. Economically priced, they are affordable enough for everyone to have their own instruments.
