Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit Septa, fitted in smooth, polyethylene, Yellow Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments.
Chemglass Life Sciences Cap, Chem Snap, 11mm, Green, 10mil PTFE Septum
Cap, Chem Snap, 11mm, Green, 10mil PTFE Septum. Chem Snap Caps™ may be snapped on and off by hand which eliminates the need for metal crimping and decapping tools, thus reducing potential hazards due to sharp aluminum edges. Large opening provides greater target area for needle penetration. Snap caps are color coded for easy sample identification.
Chemglass Life Sciences Cap, Solid, 15-425, Green, TFE Septa
Cap, Solid, 15-425, Green, TFE Septa. Replacement caps for 1 and 2 dram vials.
Chemglass Life Sciences Septa Only, GPI 13-425, Red PTFE/Silicone, 13mm x 0.060"
Septa Only, GPI 13-425, Red PTFE/Silicone, 13mm x 0.060".
Chemglass Life Sciences Preassembled Closure and Septa, Yellow, 9mm Thread, PTFE/Silicone Septa with Slit
Preassembled Closure and Septa, Yellow, 9mm Thread, PTFE/Silicone Septa with Slit. Pre-assembled closure and septa minimize contamination from handling. They are convenient and available in a variety of colors with your choice of septa.
Chemglass Life Sciences Cap Only, 18mm Headspace, Magnetic, White PTFE/Translucent Blue Silicone 3.12mm Thick Septa
Cap Only, 18mm Headspace, Magnetic, White PTFE/Translucent Blue Silicone 3.12mm Thick Septa. Magnetic Headspace Caps with Septa: (All Silicone is Low Bleed)The 18mm magnetic screw caps are designed for use with any autosampler using a magnet to transport the vial from station to station. The closures are preassembled with a variety of septa.Magnetic Screw Caps with Pre-Cut Star Septa:Preassembled closures include pre-cut septa where only the carrier is cut through in a Y- form, leaving the PTFE lamination in tact. The unhurt PTFE lamination gives 100% protection to the sample while leaving a 0.05mm thick PTFE portion remaining for needle penetration. The Y-form in the pre-cut silicone allows for a better flow of air during sample pick up in order to avoid a vacuum in the vial. Designed for use with any autosampler using a magnet to transport the vial from station to station.
Chemglass Life Sciences Preassembled Closure and Septa, Green, 9mm Thread, PTFE/Silicone Septa
Preassembled Closure and Septa, Green, 9mm Thread, PTFE/Silicone Septa. Pre-assembled closure and septa minimize contamination from handling. They are convenient and available in a variety of colors with your choice of septa.
Chemglass Life Sciences Aluminum Seal, Pressure Release, Silver, 20mm, PTFE/Rubber Septa
Aluminum Seal, Pressure Release, Silver, 20mm, PTFE/Rubber Septa. Pressure release seals are designed to open when the internal pressure exceeds 3.00.5 bar.
Chemglass Life Sciences Poly Crimp Seal, 11mm, Red Cap, PTFE/Silicone Septum
Poly Crimp Seal, 11mm, Red Cap, PTFE/Silicone Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Chemglass Life Sciences Bonded Closure, Standard, 9mm, Black, Open Hole, 0.40" PTFE/Silicone
Bonded Closure, Standard, 9mm, Black, Open Hole, 0.40" PTFE/Silicone. Bonded closures feature clear PTFE/Silicone liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Non-slit design.
Microsolv Technology Corporation 1000Pk Caps Black
Caps, Screw Top, with White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in knurled, polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. BASIK Brand. 1000/CS.