Hamilton™ 1800 Series Gastight™ Fixed-Needle Syringes

Catalog No.	Volume (Metric)	Needle Gauge	Model
14-815-258	250 μL	22s G	1825
14-815-250	10 μL	26s G	1801
14-815-254	50 μL	22s G	1805
14-815-252	25 μL	22s G	1802
14-815-256	100 μL	22s G	1810

Catalog No. 14-815-258 Supplier Hamilton™ Supplier No. 84887

Description

Reinforced plunger version of the 1700 series syringes is ideal for dispensing volumes from 1 μL up to 500 μL.

Attached to the flange of the syringe is a blue Syringe Holder. The Syringe Holder provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies. Additionally it provides support to small volume plungers that are prone to bending during injection. A variety of different terminations and needle options are available.

1800 Series Syringe Terminations

• Fixed-Needle (N)- For low volume syringes the needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. With this termination, dead volume is limited to the internal volume of the needle. Not autoclavable. Needle gauge is determined by the syringe volume and are not user-selectable.

• Needle Point Styles

• Point Style 2 - Sharp, beveled, curved, non-coring needle point recommended for septum penetration. Available gauges: 22
• Point Style AS - Special conical style needle point used on autosampler syringes the non-coring needle point is recommended for septum penetration. Available gauges: 26 & 22

Note: These syringes are not calibrated. If calibration certificate is needed, contact Customer Service to order the calibrated version, which has the same Mfr. No. with a "CAL" in front of it (i.e., CAL84887). 

 

Specifications

• Autoclavable: Not Autoclavable
• Material: Borosilicate Glass (Barrel), PTFE (Tip), Stainless Steel (Plunger)
• Needle Gauge: 22s G
• Diameter (English) Inner: 0.091 in.
• Diameter (English) Inner Needle: 0.0059 in.
• Diameter (Metric) Inner Needle: 0.15 mm
• Diameter (English) Outer Needle: 0.0283 in.
• Diameter (English) Outer: 0.305 in.
• Diameter (Metric) Inner: 2.3 mm
• Diameter (Metric) Outer: 7.75 mm
• Diameter (Metric) Outer Needle: 0.72 mm
• For Use With (Application): Dispensing volumes from 1μL up to 500μL
• Length (English) Needle: 2 in.
• Product Type: Gastight, Cemented Needle
• Max. Pressure: 1000 psig (68.9 bar)
• Max. Temperature (English): 122°F
• Max. Temperature (Metric): 50°C
• Min. Temperature (English): 50°F
• Model: 1825
• Needle Point Number: 2
• Min. Temperature (Metric): 10°C
• Quantity: 1/Pk.
• Volume (Metric): 250 μL
• Needle Point Style: 2
• Connection Type: Cemented