Labconco™ XPert™ Nano Enclosures: 5ft. Width With Built-in Ionizer

Description

Requires

Support base

Keep hazardous powders and particulates contained during procedures

Room air is pulled into the enclosure through the front, flows to the baffle and finally passes through a 99.99% ULPA exhaust filter before returning to the laboratory or cleanroom. Features built-in blower and Guardian™ airflow monitor. With built-in ionizer; separate filtered exhauster is not required.

• Ergonomic air foil with aerodynamic Clean-Sweep™ airflow openings; side spring pin releases air foil for cleaning
• Upper dilution air supply and containment sash foil with side-entry air foils
• Zone-perforated, rear baffle pivots down and removes for cleaning
• Exhaust ULPA filter, 99.99% efficient on 0.12μm particles; accessible from top for leak scanning of entire surface
• True bag-in/bag-out filter disposal system (requires certified technician)
• Built-in blower with dynamically balanced, vibration-isolated motorized impeller and speed control
• 40% Blower reserve allows speed adjustment (by certified technician) as filter loads
• Pressure gauge to monitor filter loading
• Guardian Airflow Monitor continuously monitors airflow; features visual and audible alarms if airflow is outside setpoint range

Construction

• Choice of interior depth (depending on width selected): 50cm (23.4 in.) or 76cm (30 in.)
• Type 304 stainless-steel interior sides, baffle, air foil and integral work surface
• Glacier white and gray, dry powder epoxy-coated aluminum and steel exterior
• Prewired fluorescent lamp and switches for blower and light
• 0.6cm (0.25 in.) Thick tempered safety glass front sash
• Sash opening height on 30cm (11.8 in.) height on 5 ft. models
• Ergonomically angled and hinged sash pivots upward, locks in up position; wiping seal contains contaminants
• 5 ft. models incorporate an external gas-assist lift
• Two utility ports for pass-through of electrical cords

Specifications

• Sash Opening: 11.8 in.
• At 100fpm Exhaust: 480cfm
• At 100fpm Noise: 63-67dbA
• At 80fpm Exhaust: 385cfm
• At 80fpm Noise: 58-63dbA
• At 60fpm Exhaust: 290cfm
• At 60fpm Noise: 52-56dbA

Ideal for nanoparticle manipulation and dry powder chemical handling

Order Info

Optional accessories include canopy connection, remote blowers, ductwork

Compliance

SEFA 1-2002; Modified ASHRAE™ 110-1995; ANSI™ Z9.5-1993; UL 3101-1/61010-1; CAN/CSA C22.2 No. 1010.1; CE Conformity Marking (230V models)

Specifications

• Product Type: Enclosure
• Lighting Type: Fluorescent
• Material: Steel
• Certifications/Compliance: CE
• Chamber Material: Epoxy Coated Aluminum
• Color: Glacier White, Gray
• Depth (English): 29.1 in.
• Depth (English) Interior: 23.3 in.
• Depth (Metric): 74 cm
• Depth (Metric) Interior: 59.18 cm
• Dimensions (L x W x H): 29.1 x 60 x 47.5 in. (73.9 x 152 x 120.65 cm)
• Exhaust: ULPA filter
• For Use With (Application): Nanoparticle manipulation and dry powder chemical handling
• Height (English): 47.5 in.
• Height (English) Interior: 31.8 in.
• Height (English) Sash Opening: 11.8 in.
• Height (Metric): 120.65 cm
• Height (Metric) Sash Opening: 30 cm
• Hertz: 50 Hz
• Length (English): 29.1 in.
• Length (Metric): 73.9 cm
• Noise Level: 58 to 63 dBA
• Voltage: 230 V
• Volume (English) Exhaust: 290 to 480 cfm
• Volume (Metric) Exhaust: 136.86 to 226.53 L/sec.
• Width (English): 60 in.
• Width (English) Interior: 58.8 in.
• Width (Metric): 152 cm
• Width (Metric) Interior: 149.35 cm