Labconco enchances global science for 90 years. Labconco enchances global science for 90 years.
Class II Biosafety Cabinets
ScrubAir Washer/Dryer
Filtered Fume Hoods
All Products

Labconco™ SpillStopper™ Work Surfaces for 4 Ft. Protector™ Premier™ and Protector™ XL Hoods Products for Science Education

SpillStopper Work Surfaces are molded of corrosion-resistant solid epoxy. They are contoured to conform to the interior liner of Protector Premier and XL Hoods.

Labconco™ Cascade FreeZone Plus™ Freeze-Dry Systems, US Models

Designed to freeze dry materials with low-eutectic points

Labconco™ Blood Drawing Chairs

Provides optimal positions for venipuncture

Labconco™ FreeZone™ Freeze Dry System Accessory, Bulk Tray Dryer

Bulk Tray Dryer is designed for use with Labconco™ FreeZone 6L, FreeZone 12L, FreeZone 18L Freeze Dry Systems.

Labconco™ Protector™ Echo™ Filtered Benchtop Fume Hoods: 5 ft. Width

Adaptable fully-featured fume hood with Neutrodine™ filtration technology

Labconco™ Purifier™ Logic+™ Class II A2 Biosafety Cabinets, 1.5m (5 ft.) Width, 25cm (10 in.) Opening, International Model

Protection from hazardous particulates such as agents requiring Biosafety Level 1, 2 or 3 containment

Labconco™ Protector™ Double Stainless-steel Combination Glove Boxes

Has the capability to function as either a filtered box or a controlled atmosphere glove box

Labconco™ Purifier™ Cell Logic+™ Class II A2 Biosafety Cabinets, 3ft. Width, 9in. Opening, International Model

Biohazard cabinets with advanced ergonomic design excel in user comfort and functionality

Labconco™ RXPert™ Single Filtered Balance Systems

The patented RXPert Filtered Balance System is Class I Enclosure that meets USP <800> requirements for non-sterile compounding when ducted. Models feature an all-in-one factory-installed canopy and damper for thimble ducting to the outside.

Labconco™ Benchtop FreeZone™ Freeze-Dry Systems, US Models: 6L

With a small footprint and four rubber feet, these smaller capacity models fit easily on benchtop and are ideal for light and moderate loads

Labconco™ Purifier™ Logic+™ Class II A2 Biosafety Cabinet, 5 ft. Width, 10 in. Opening

Labconco Purifier™ Logic+™ Class II A2 Biosafety Cabinets with advanced ergonomic design excel in user comfort and functionality.

Labconco™ Lyph-Lock™ Freeze-Dry Flask Assembly

Complete three-piece flask consists of high-strength borosilicate glass molded top and bottom with silicone rubber seal

Labconco™ Console FreeZone™ Freeze-Dry Systems: 6L

Freestanding models available in several system configurations and collector capacities to meet sample load requirements

Labconco™ XPert™ Balance Enclosures, Standard Height: 72 in.W

Protects user by keeping powders, particulates and fumes contained

Labconco™ Purifier™ Class I Safety Enclosure

Provide your staff with personnel and environmental biohazard protection by outfitting your lab with the Labconco Purifier™ Class I Safety Enclosure.

Labconco™ SpillStopper™ Work Surface for 4 Ft. Protector™Premier™Hoods

Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Labconco™ Purifier™ Horizontal Clean Bench, 5 ft.: With UV Light

When using a Labconco Purifier™ Horizontal Clean Bench, workers are protected from particulate contamination.

Labconco™ SpillStopper™ Work Surface for 8ft. Protector™Premier™and Protector™XL Hoods

Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.

Labconco™ XPert™ Filtered Balance Station, Deep: 6ft., 115V 60Hz

Built-in HEPA filter, mounted in the upper plenum, removes particulates and exhausts clean air to the atmosphere

Labconco™ Console FreeZone™ Freeze-Dry Systems, US Models: 6L

Available in several system configurations to meet sample load requirements

Labconco™ Telescoping Base Stands

For 4 ft. telescoping base stand

Labconco™ Purifier™ Logic+™ Class II A2 Biosafety Cabinet, 5 ft. Width, 8 in. Opening

Labconco Purifier™ Logic+™ Class II A2 Biosafety Cabinets with advanced ergonomic design excel in user comfort and functionality.

Labconco™ Protector™ Echo™ Filtered Benchtop Fume Hoods: 6 ft. Width

Adaptable fully-featured fume hood with Neutrodine™ filtration technology

  spinner

Featured Products
fume-hoods

Fume Hoods

Protect the user from harmful or toxic fumes or vapors with Labconco’s containment-enhancing features.

class-ii-biosafety-cabinets

Class II Biosafety Cabinets

Provide Biosafety Level 1, 2 or 3 containment of hazardous particulates and agents to protect personnel, product and the environment.

glassware-washers

Glassware Washers

Labconco laboratory glassware washers have specialized features to meet your laboratory’s demands for superior cleaning and convenience.

Featured Products

Resources

Featured Videos

90th Anniversary Video

Take a look at Labconco’s history from opening its doors in 1925 to expanding into new markets and all the way to the present!

Axiom Class II Biosafety Cabinets

Take a look at the world’s first Class II Type C1* Biosafety Cabinet including features and airflow demonstrations. (*The new C1 designation is pending NSF approval.)

ScrubAir Pipette Washer/Dryer

Watch the ScrubAir in action as the direct-injection and compressed air percolate to scrub the inside and outside of the pipettes.


More


Special Offers
labconco-lg-logo

Serving the scientific community since 1925, Labconco Corporation manufactures laboratory equipment, specializing in ventilation products such as Chemical Fume hoods, HEPA-filtered Biological Safety Cabinets and Glove Boxes. For over 40 years, we have manufactured a full line of laboratory-scale Freeze Dry systems and Vacuum Concentrators. Our product offering also includes laboratory Glassware Washers and Water Purification Systems. Labconco is ISO 9001-certified ― just one measure of its commitment to quality and consistency in design and manufacturing. In 2015 we celebrated our 90th year serving the needs of laboratories around the world.