Labconco™ Protector™ Stainless-Steel Perchloric Acid Hood

Catalog No.	Includes	Pressure	Voltage	Dimensions (L x W x H)
13-118-201	2 Service Fixtures	725 cfm at 0.25 in. H2O at 100 fpm	115 V	48 x 31.7 x 59 in.
13-118-202	2 Service Fixtures, 1 Receptacle	725 cfm at 0.25 in. H2O at 100 fpm	115 V	48 x 31.7 x 59 in.
13-118-200	No Service Fixtures	725 cfm at 0.25 in. H2O at 100 fpm	115 V	48 x 31.7 x 59 in.
13-118-204	2 Service Fixtures	725 cfm at 0.25 in. H2O at 100 fpm	230 V	48 x 31.7 x 59 in.
13-118-203	No Service Fixtures	725 cfm at 0.25 in. H2O at 100 fpm	230 V	48 x 31.7 x 59 in.
13-118-210	No Service Fixtures	955 cfm at 0.33 in. H2O at 100 fpm	115 V	60 x 31.7 x 59 in.
13-118-211	2 Service Fixtures	955 cfm at 0.33 in. H2O at 100 fpm	115 V	60 x 31.7 x 59 in.
13-118-213	No Service Fixtures	955 cfm at 0.33 in. H2O at 100 fpm	230 V	60 x 31.7 x 59 in.
13-118-212	2 Service Fixtures, 1 Receptacle	955 cfm at 0.33 in. H2O at 100 fpm	115 V	60 x 31.7 x 59 in.
13-118-214	2 Service Fixtures	955 cfm at 0.33 in. H2O at 100 fpm	230 V	60 x 31.7 x 59 in.
13-118-221	2 Service Fixtures	1180 cfm at 0.50 in. H2O at 100 fpm	115 V	72 x 31.7 x 59 in.
13-118-220	No Service Fixtures	1180 cfm at 0.50 in. H2O at 100 fpm	115 V	72 x 31.7 x 59 in.
13-118-222	2 Service Fixtures, 1 Receptacle	1180 cfm at 0.50 in. H2O at 100 fpm	115 V	72 x 31.7 x 59 in.
13-118-223	No Service Fixtures	1180 cfm at 0.50 in. H2O at 100 fpm	230 V	72 x 31.7 x 59 in.
13-118-224	2 Service Fixtures	1180 cfm at 0.50 in. H2O at 100 fpm	230 V	72 x 31.7 x 59 in.
13-118-230	No Service Fixtures	1640 cfm at 0.28 in. H2O at 100 fpm	115 V	96 x 31.7 x 59 in.
13-118-231	2 Service Fixtures	1640 cfm at 0.28 in. H2O at 100 fpm	115 V	96 x 31.7 x 59 in.
13-118-232	2 Service Fixtures, 1 Receptacle	1640 cfm at 0.28 in. H2O at 100 fpm	115 V	96 x 31.7 x 59 in.
13-118-233	No Service Fixtures	1640 cfm at 0.28 in. H2O at 100 fpm	230 V	96 x 31.7 x 59 in.
13-118-234	2 Service Fixtures	1640 cfm at 0.28 in. H2O at 100 fpm	230 V	96 x 31.7 x 59 in.
13-118-237	2 Service Fixtures	1640 cfm at 0.28 in. H2O at 100 fpm	115 V	96 x 37.7 x 59 in.

Catalog No. 13-118-201 Supplier Labconco™ Supplier No. 130400001

Description

Requires

Remote blowers, ductwork, base cabinets, adjustable height base stands

The Type 316 stainless-steel interior of the Labconco Protector™ Stainless-Steel Perchloric Acid Hood withstands reaction and helps keep your lab safe.

• By-pass airflow design
• Glacier white, dry powder powder-coated steel exterior
• Curved ergonomic air foil with aerodynamic Clean-Sweep™ airflow openings
• Type 316 stainless-steel liner (23.5 in. interior depth) with radiused corners, integral work surface, drainage trough and pre-set baffles
• Black enamel-coated hardboard surface to support the integral work surface
• 0.18 in. Thick tempered safety glass vertical rising sash with frame of powder-coated aluminum and PVC
• Sash does not extend above the hood when fully open
• Removable front and side panels and front access panels for access to plumbing and electrical wiring
• Built-in washdown system with internal piping and spray nozzles behind the baffle and remote control fixture on upper left side
• Washdown fitting located on top of hood to facilitate connection to external wash rings (wash rings not included)
• Two pre-plumbed service fixtures with forged brass valves and chrome-plated brass serrated hose connectors, lower right side with brass tubing for gas and lower left side with copper tubing for air
• Components for converting either or both fixtures to cold water and vacuum are provided
• Energy-efficient LED lighting
• Pre-wired 115/230V electrical duplex receptacle on lower right side
• 11 in. O.D. Type 316 stainless-steel exhaust connection(s)

Air usage/static pressure with sash full open (at 100fpm)

• 4 ft. Model: 725cfm at 0.17 in.
• 5 ft. Model: 955cfm at 0.33 in.
• 6 ft. Model: 1180cfm at 0.50 in.
• 8 ft. Model: 1640cfm at 0.28 in.

Order Info

Available in 4, 5 and 6 ft. width

Certifications

ETL Listed, UL 3101-1/61010-1, UL 1805

Compliance

SEFA 1-2002, NFPA 45-2004, ASTM™ E84-01, ASHRAE™ 110-95, ANSI™ Z9.5-2003, CAN/CSA C22.2 No. 1010.1

Specifications

• Product Type: Perchloric Acid Laboratory Hood
• Coating: Powder
• Lighting Type: LED
• Material: Epoxy-coated Steel
• Certifications/Compliance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL
• Depth (English): 31.7 in.
• Depth (Metric): 80.5 cm
• Dimensions (L x W x H): 48 x 31.7 x 59 in.
• Height (English): 59 in.
• Height (Metric): 149.9 cm
• Hertz: 50/60 Hz
• Includes: 2 Service Fixtures
• Pressure: 725 cfm at 0.25 in. H2O at 100 fpm
• Voltage: 115 V
• Weight (English): 575 lb.
• Weight (Metric): 260.8 kg
• Width (English): 48 in.
• Width (Metric): 121.9 cm