Viscosity Standards
Viscosity Standards
Brookfield Engineer Labs General Purpose Oil, B29, Nominal Viscosity 29, 25°C
Oil Viscosity Standards are used during calibration checks of specific instruments such as cone/plate viscometers or rheometers as well as Krebs spindle geometry instruments.General Purpose Oil Fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.Accuracy: +/-1% of viscosity valueAppropriate for use at shear rates greater than 500 sec-1Recommended for use with cone/plate Viscometers at viscosities above 5,000 cPBrookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes Note: Other oil fluids are available - call for detailsBrookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
Anton Paar SILICONE VISCOSITY STANDARD AP RT30k600 ml - 33 / 30 Pa.s at 20 / 25 °CQT# 820262286
SILICONE VISCOSITY STANDARD AP RT30k600 ml - 33 / 30 Pa.s at 20 / 25 °CQT# 820262286
Canon Instrument Co * HAZARD * N1.0 Viscosity Standard 0.45 L
CANNON general purpose standards meet the precision specifications of ASTM D445/D446 and ISO 3104/3105. Lot specific data is provided with each standard.
Brookfield Engineer Labs General Purpose Silicone Fluids, 100 CPS
Brookfield Viscosity Standards provide a convenient, reliable way to verify the calibration of your Brookfield Laboratory Viscometer/Rheometer. The fluids are stored in glass bottles. Silicone viscosity standards supplied in ½ liter (1 pint) glass jars complete with a certificate of calibration.
Brookfield Engineer Labs VISCOSITY STANDARD 4900 CP 5
4900 CPS General Purpose Mineral Oil Viscosity Standard (4900 CP 5 appears to be a typo for 4900 CPS)
Brookfield Engineer Labs High Torque CAP2L Mineral Oil Fluid, Low Temp 25 ° C
General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers. Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
Brookfield Engineer Labs VISCOSITY STANDARD 80000
73000 CPS General Purpose Mineral Oil Viscosity Standard