Combination Stirring Hotplates
Grainger Pipe Mrkr Domestic Hot Water 5in H 8in W
The Brady Pipe Marker for Domestic Hot Water is a self-adhesive vinyl pipe marker that identifies hot water pipes. It has a blue background with white text that reads "Domestic Hot Water" and has an operating temperature range of -40°F to 176°F. The marker measures 1.5" W x 6" L and has an adhesive backing for easy application. It is made from flexible, conformable vinyl that resists UV light, abrasion, and chemicals. This pipe marker from Brady helps identify hot water pipes for safety purposes and meets ANSI A13.1 and NFPA 99 standards. It provides a legible and highly visible label to distinguish domestic hot water pipes from other systems.
Hach Company SC4500 Ctrl Prog Profi 1 dig S
SC4500 Controller-Prognosys-Profinet-1 digital Sensor-1 mA Input-24 VDC-without plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Hach Company SC4500 Ctrl Prog EthIP 1 dig S
SC4500 Controller-Prognosys-Ethernet IP-1 digital Sensor-1 mA Input-100-240 VAC-US plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
GRANT INSTRUMENTS Centrifuge/vortex mixer 300-1,500rpm, vortex 300-1,200rpm rotor to hold 2 PCR plates
CVP-2 is an all-in-one PCR plate centrifuge / vortex mixer that allows for the simultaneous sample preparation of multiple samples at one time. CVP-2 USA - a unit with US plug.Versatile through being able to hold un, semi and fully skirted PCR plates with no additional accessories required.The CVP-2 offers 3 devices in one:Centrifuge with vortex mixingPCR plate centrifugePCR plate mixerCVP-2 – Key features:Centrifuge and vortex mixer combined for significant time savingCentrifugation mixing speed: 300 to 1500 rpmIndependent vortex and centrifuge timers with up to 999 cyclesAdjustable rpm or 4 programmable presetsConsistently prepare up to 192 samples continuously
Hach Company SC4500 Ctrl Prog Prof DP 1 dig
SC4500 Controller-Prognosys-Profibus DP-1 digital Sensor-1 mA Input-100-240 VAC-without plug C1D2Includes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Hach Company SC4500 Ctrl Prog Prof DP 2 dig
SC4500 Controller-Prognosys-Profibus DP-2 digital Sensors-100-240 VAC-without plug C1D2Includes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Bellco Glass, Inc. Hi-Tor CTII Digital Over Head Drive Complete, 115V
The Bellco Digital CTII Hi-Torque Overhead Drive is a versatile direct-drive agitator for cell culture and most aseptic mixing applications. The Overhead Drives were developed to eliminate the problem of magnetic agitator decoupling often observed in large volume mixing and the stirring of solutions with a viscosity greater than water. Hi-Torque Overhead Drive with interface for use with CellTrol II controller. Having speed capability user can monitor (but not control) rpm of OHD from the controller display and set alarm for rpm setpoints. Includes speed cable and power supply.. MADE IN THE USA
Hach Company SC4500 Ctrl Prog EthIP 2 dig S
SC4500 Controller-Prognosys-Ethernet IP-2 digital Sensors-24 VDC-without plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 220-240 V, 50 to 1200 RPM, 10.25" x 10.25" heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 10.25" x 10.25"
Footprint: 11.3" x 16.2"
Height: 4.0"
Perkin Elmer US LLC Hot Stage Accessory - 120 V
This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.
JDM LAB SOLUTIONS LLC Oxford BenchMate 10 Liter Hotplate Stirrer, 320 deg., Speed range - 200-2200rpm (includes Probe & stand) - 3 Top plate Options
Oxford BenchMate 10 Liter Hotplate Stirrer, 320 deg., Speed range - 200-2200rpm (includes Probe & stand) - 3 Top plate Options
JDM LAB SOLUTIONS LLC Oxford BenchMate 10 Liter Hotplate Stirrer, 320 deg., Speed range - 200-2200rpm (includes Probe & stand) - 3 Top plate Options 220V
Oxford BenchMate 10 Liter Hotplate Stirrer, 320 deg., Speed range - 200-2200rpm (includes Probe & stand) - 3 Top plate Options 220V