Combination Stirring Hotplates
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 120 V, 50 to 1200 RPM, 10.25" x 10.25" heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 10.25" x 10.25"
Footprint: 11.3" x 16.2"
Height: 4.0"
Hach Company SC4500 Ctrl Prog Prof DP 1 dig
SC4500 Controller-Prognosys-Profibus DP-1 digital Sensor-100-240 VAC-without plug C1D2Includes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Hach Company SC4500 Ctrl Prog Modb TCP LAN
SC4500 Controller-Prognosys-Modbus TCP LAN-2 digital Sensors-100-240 VAC-without power cordIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Sigma Aldrich Fine Chemicals Biosciences IKAR C MAG HS hotplate sti1EA
C-MAG HS 4 IKMAGNew magnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance.Powerful motor for stirring quantities of up to 5 L (H2O)Fixed safety circuit of 550CHot Top indicator hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayElevated control panel for protection against leaking liquids
Biosurface Technologies Corp CDC Biofilm Reactor with Stir/Hot Plate, Mid- to High-Shear Laboratory Biofilm Growth Device, BioSurface Technologies Corporation.
"The CDC Biofilm Reactor® consists of eight (8) polypropylene coupon holder rods suspended from a UHMW-polyethylene ported lid. Each coupon holder rod can accommodate three (3) 1/2-inch (12.7 mm) diameter coupons, for a total of twenty-four(24) coupons. The lid (with coupon holders and coupons) is mounted in a 1-liter glass vessel with side-arm discharge port. A liquid growth media or biocide is circulated through the vessel while mixing and shear is generated by a magnetic stir bar and vane rotated by a magnetic stir plate.Sampling of the coupons is conducted by aseptically removing individual coupon holder rods with accompanying coupons (3). The coupon holder (or blank) rod is replaced in the lid after sampling to allow the time-course experiment to continue. The coupon removed from the reactor vessel is then used for treatment evaluations, scraped or vortexed to collect the biofilm sample for further study.
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 120 V, 50 to 1200 RPM, 7.25" x 7.25 heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 7.25" x 7.25
Footprint: 8.2" x 13"
Height: 3.8"
Hach Company SC4500 Ctrl Prog EthIP 2 dig S
SC4500 Controller-Prognosys-Ethernet IP-2 digital Sensors-100-240 VAC-US plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Cole-Parmer Five-Position Stirring Hot Plate, 120 VAC
These multiposition stirring hot plates offer more versatility than single-position units. Stirring hot plates are available with five or nine stirring positions. Each stirring position is individually controlled so you can perform different mixing applications simultaneously. Use stirring hot plates to heat only, stir only, or heat and stir simultaneously. The corrosion-resistant ceramic tops heat quickly and never warp or buckle. The temperature control has OFF, HI, and LOW detents/settings, with 270 degrees of infinite control between the low and high detents.
Chemglass Life Sciences AREX 5 Advance Magnetic Hot Plate Stirrer KIT with Probe, Vertical Support Rod, Boss Head, and Support/Holding Rod
State-of-the-art heating magnetic stirrer combining powerful performance advanced safety features several connectivity options and enhanced user experience Designed to meet the highest demands it ensures precision efficiency and uncompromising safety in every experiment Stirring Capacity Up to 20L (H2O)Speed Range 30 1 700RPMElevating Laboratory StandardsSet temperature ramps monitor viscosity switch stirring modes and streamline workflows with advanced timing and connectivity Remote control and monitoring via VELP Ermes Cloud Platform Save and transfer data via USB Precise ThermoregulationMaximum control for temperature-sensitive tasks with PT100 PT1000 probe or VTF Digital Thermoregulator When connected to probes two modes available Fast (rapid heating) and Fine (minimized overshoot) Thermoregulation range ambient to 310 C Advanced StirringDurable brushless motor with strong magnetic coupling Stirs up to 20 L from 30 to 1700 rpm
Hach Company SC4500 Ctrl C1D2 Prog Prof DP
SC4500 Controller-C1D2-Prognosys-Profibus DP-1 digital Sensor-24 VDC-without plugIncludes Controller-Non-Claros Embedded Prognosys-without power cord includes mounting hardware
Chemglass Life Sciences AREC.X Digital Ceramic Hotplate Stirrer with PT100 Probe, 115V/60Hz
Ceramic Digital Hotplate Stirrer, 7.9 x 7.9", 115V, Complete with 3mm PT100 Probe. Compliance with the following standards CE, CSA and UL. Square hot plate offers advanced technology with a digital display for stirring speed and temperature settings. A microprocessor ensures constant speed even when viscosity changes. The 7.9x7.9¿ white ceramic hotplate surface is easy to clean and provides excellent resistance to chemicals, scratches and surface abrasions. Hot plate designed for precise thermoregulation as well as a high degree of reliability and safety. Designed for maximum protection against liquid penetration. Unit features an elevated front panel and runoff groove. Hotplate stirrer comes equipped with a socket for the connection of the optional VTF digital thermoregulator for more precise temperature control and a digital count down timer that shuts off heating- adjustable from 0 to 24:59 (h:min). Supplied complete with probe only. Rod, clamp purchased separately.
PACKAGING CORPORATION OF AMERICA BROWN BOXES HSC. BPT.FLP16X8X6
NC2950916 BROWN BOXES HSC. BPT.FLP16X8X6