Combination Stirring Hotplates
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirring Hot Plate Aluminum Top, 120 V, 7.25" x 7.25" heating surface, 50 to 1200 RPM
These hot plates are ideal for cold rooms & can be used at 0-27°C w/ 80% relative humidity, in a non-condensing environment. Stir Trac technology offers improved slow speed stirring, consistent speed control & stronger magnetic coupling from 50 rpm to 1200 rpm. The integral ring stand holder accepts 1.3cm diameter support rod. A single knob design controls heating/stirring & goes up slowly when rotated slowly & faster when rotated faster. Adjustable 1 °C & 1 rpm increments. The RS232 port enables output of time count, temp set points, top surface/remote probe temp, stirring set point & actual speed to a printer or computer. Supplied w/ 6" type K probe, detachable cord, retention bracket that prevents cord from accidental removal, & a TFE-coated stir bar. Walk-away timer shuts off heating, stirring or both after a preset user-defined interval. Durablle aluminum top for uniform heat distribution.Heating surface: 7.25" x 7.25"RPM: 50 to 1200Amps: 5.6Wattage: 670
Electron Microscopy Sciences SUPER-NUOVA™ Digital Stirrers Ceramic Top, 220-240 V, 50 to 1200 RPM, 7.25" x 7.25 heating surface
SuperNuova digital stirers with Stir Trac offers improved slow speed stirring, consisting speed control and stronger magnetic coupling from 50 rpm up to 1200 rpm. The seamlesss reflective white ceramic top enhances sample visibility and the rugged low-profile cast aluminum body provides stability and durability. The easy-to-read digital displays indicate rpm for stirring models, adjustable in 1 rpm increments. The user programmable preset buttons allow for up to four often-used stirring speeds to be recalled at the touch of a single button. Set points go up slowly when the knob is rotated slowly, faster as the knob is rotated faster. The knob then is locked out to avoid accidental changes. All models supplied with 2" x 3/8" dia TFE-coated stir bar, detachable cord and retention racket that prevents cord from accidentally removed.
RPM: 50 to 1200
Heating surface: 7.25" x 7.25
Footprint: 8.2" x 13"
Height: 3.8"
Electron Microscopy Sciences Corning Pyroceram Pc220 Hot Plate/Stirrers, 120 V, 25-550°C Range
The Corning exclusive glass-ceramic Pyroceram top features exclusive microprocessor design that ensures faster and even heating. Exclusive closed-loop stirring monitors and regulated stirring speed. Exclusive external ‘spill trough' deflects spills away from electronic and control knobs. Superior component designs and enclosed control electronics protect temperature and stirring control circuits from harsh environments. Extra large knobs with easy-to-read numbers provide better control.
RPM: 60-1100
Heating surface: 4" x 5"
Range: 25-550°C
Footprint: 4.4" x 5.8"
Electron Microscopy Sciences EMS Support Rod for Hotplate / Stirrer
For use with EMS digital hotplates and stirrers.
Research Products International Corp Echotherm Digital Hot Plate and Stirrer
EchoTherm Digital Hot Plate/Stirrer features constant display of all functions. LCD display functions include display target and actual plate temperature: target and actual solution temperature stirring speed; temperature ramping; and count down timer with auto/off.
Easy to use membrane keyboard allows heating, stirring, timing and electronic calibration. Chemically resistant ceramic glass top heats quickly. Ceramic top is mounted on aluminum frame and provides cool edge to prevent burns. Platinum RTD and PID temperature measurement systems enable precise and accurate temperature control.
Supplied with 6-ft grounded line cord, fuse holder, and main on/off switch.
Hach Company Hot Plate Stirrer, 7x7 in., digital, 115 Vac
Easy-to-read digital temperature settings features a flashing warning (CAUTION! HOT TOP) when the surface exceeds 50ºC. Stirring range of 60-1200 RPM.Low-profile design to improve safety. Reflective, white ceramic top is smooth, seamless and resistant to alkali/acid solutions. Detachable cord. Built-in support rod holder (order separately). Operating temperature range: 5 to 540°C (41 to 1004°F).
Chemglass Life Sciences Magnetic Hot Plate Stirrer, Digital, 135mm Plate, Timer, Complete with PT100 Probe, 115V 50/60 Hz, Compliant with CE, CSA and UL standards
Magnetic Hot Plate Stirrer, Digital, 135mm Plate, Timer, Complete with PT100 Probe, 115V 50/60 Hz, CE, CSA and UL Approved. Chemglass 135mm round top DIGITAL hot plate stirrer system with built in timer. Hotplates feature many exclusive features and improved safety enhancements. The 135mm diameter heater top is scratch proof and chemically resistant. The integrated TIMER provides an additional layer of safety ensuring the hotplate heater is "off" after the elapsed time (settable from 1min to 99h: 59min). TRU-RPM stirring provides very accurate mixing speeds through the entire RPM range from 30 to 1700 rpm. The back corner of the housing has an M8 female thread to accept a vertical support rod. New and improved knobs and buttons assure simple and intuitive control of the hotplate stirrer. Note: Hot plates have been designed and manufactured in compliance with the following standards CE, CSA and UL.
Ace Glass, Inc. Splitter, reflux, 24/29, angled for use with 10° side necks transitioning to 90°s
Splitter, reflux, 24/29, angled for use with 10° side necks transitioning to 90°s
Biotang Inc MS-H-S Analog Magnetic Hotplate Stirrer, porcelain plate with Heating, speed range 0-1500 rpm, Temperature range: Ambient to 350deg.C (662 deg.F), plate diameter 135 mm
MS-H-S Analog Magnetic Hotplate Stirrer, porcelain plate with Heating, speed range 0-1500 rpm, Temperature range: Ambient to 350deg.C (662 deg.F), plate diameter 135 mm
Sigma Aldrich Fine Chemicals Biosciences IKAR C MAG HS hotplate sti1EA
C-MAG HS 4 IKMAGNew magnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance.Powerful motor for stirring quantities of up to 5 L (H2O)Fixed safety circuit of 550CHot Top indicator hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayElevated control panel for protection against leaking liquids
Alkali Scientific™ H4000-HS Hotplate Magnetic Stirrer, 7.5"x7.5", 115V
Ceramic work surface, 7.1 x 7.1 in. Stir speed from 60 to 1500 rpm Temperature control up to 380°C Three models: heat-stir, heat only or stir only Alkali hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemical resistant white ceramic work surface. Their space-efficientdesign (8 X 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and/or stirring functions have been activated. With a square 7.1 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hotplate/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes.
Cole-Parmer Torrey Pines EchoTherm HS40 Programmable Digital Stirring Hot Plate, 115V
Repeat any program up to 98 times automatically. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. Includes timer to 99 hours, 59 minutes with auto-off option. Unit can be programmable or non-programmable in operation. Offers RS232 interface for control or recording data via a computer. 6-foot cord with plug is included.