Oven Accessories
- (14)
- (4)
- (1)
- (1)
- (3)
- (4)
- (1)
- (2)
- (5)
- (1)
- (2)
- (2)
- (2)
- (1)
- (2)
- (1)
- (4)
- (1)
- (1)
- (1)
- (2)
- (1)
- (15)
- (1)
- (3)
- (2)
- (3)
- (1)
- (2)
- (3)
- (1)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (3)
- (1)
- (1)
- (1)
- (1)
- (23)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (3)
- (1)
- (1)
- (4)
- (3)
- (1)
- (1)
- (2)
- (2)
- (3)
- (2)
- (3)
- (4)
- (1)
- (1)
- (1)
- (4)
- (1)
- (1)
- (1)
- (1)
- (1)
Filtered Search Results
Grainger FOAMGLAS 90° Elbow, Closed Cell Glass, 2 in. Thick, 6 5/8 in. ID
This 90° elbow pipe fitting insulation is designed for high-performance thermal management in industrial piping systems. Constructed from rigid, closed-cell glass, this prefabricated insulation provides reliable protection across a wide temperature range and is engineered for use in chemical, chilled water, cryogenic, and hot oil piping systems.
- Temperature range of -270°C to +480°C (-450°F to +900°F)
- Nominal inside diameter of 6 5/8 in. with 2 in. wall thickness
- Rigid closed-cell glass structure is waterproof, vapor-tight, and pest-proof
- Incombustible material with a fire classification of A1
- Acid-resistant and high compressive strength of 1.60 N/mm
- Factory prefabricated and pre-coated with high temperature anti-abrasive finish
- Plenum rated for installation versatility
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger FOAMGLAS Pipe Fitting Insulation, 90° Elbow, Cellular Glass, 2 in. ID, 2 in. Thick
This cellular glass insulation is designed for 90° elbow pipe fittings, providing a rigid and efficient thermal solution. Factory trimmed and preformed, these half-sections are engineered to simplify installation and reduce field fabrication time. It is highly resistant to extreme temperatures, moisture, and corrosive environments, making it suitable for a wide range of industrial piping systems.
- Operating temperature range from -450°F to +900°F
- 6.9 R-Value for effective thermal performance
- Resistant to corrosion, moisture, mold, and microbes
- Closed-cell structure prevents fluid and pest infiltration
- Plenum rated for safety
- Fits 1 1/2 in. nominal pipe size with 2 in. wall thickness
- Complies with ASTM E84, E136, and E96 standards
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville Pipe Fitting Insulation, 90° Elbow, Mineral Wool, 2 in. Thick, 2 in. ID
These mitered pipe fitting insulation 90° elbows are designed for thermal control and fire resistance in industrial piping systems. Manufactured from water-repellent mineral wool fibers and a thermosetting resin binder, they provide consistent quality and high-density performance for standard and non-standard radius sweep elbows.
- Fits 1-1/2 in. pipe size with 2 in. inside diameter and 2 in. wall thickness
- Features high dimensional stability and low thermal conductivity to help minimize heat loss
- Low shrinkage characteristics reduce the potential for gaps forming at joints
- Non-combustible construction with flame spread and smoke developed ratings of 0
- Suitable for use in chilled water, high pressure steam, hot water, and mechanical/power systems
- Complies with MICA national commercial and industrial insulation standards
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Rockwool ProRox SL 970 Stone Wool Slab, 680°C
ProRox® SL 970 is a rigid stone wool slab engineered for high-temperature thermal insulation in industrial applications such as ovens, furnaces, and flue gas ducts. This insulation material is designed to provide efficient thermal management and acoustic performance in demanding environments while remaining dimensionally stable.
- Maximum service temperature of 680°C
- Non-combustible and fire resistant with EuroClass A1 reaction to fire
- Excellent acoustic performance and thermal insulation properties
- Dimensionally stable and supports corrosion mitigation
- Conforms to ASTM C795 for stainless steel corrosion specification
- Complies with industry standards including CINI 2.2.01 and ASTM C612
- Nominal density of 115 kg/m³
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger ROXUL ProRox SL 560NA Insulation Board, Stone Wool, 1200°F, 24 in. x 48 in.
ProRox SL 560NA is a pressure-resistant rigid mineral wool insulation board designed for high-temperature applications subjected to medium mechanical loads. It is suitable for the thermal and acoustic insulation of industrial equipment including boilers, vessels, columns, and flue gas ducts.
- Capable of withstanding temperatures up to 1,200°F (649°C)
- Complies with ASTM C612 Type IVB and ASTM C795 standards
- Chemically inert stone wool composition
- Suitable for industrial, marine, and offshore installations
- Zero flame spread and smoke development index ratings
- Passed stress corrosion cracking testing for austenitic stainless steel
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger ITW High Temperature Insulation, PIR Foam, FSK Facing, 24 in W, 4 ft L
These rigid, lightweight polyisocyanurate (PIR) foam insulation boards provide high-performance thermal regulation and structural integrity. Engineered for high-compression applications, these boards are easier to cut and install than traditional insulation blankets or wraps.
- Provides a high thermal resistance with an R-value of 15.8
- Constructed from closed-cell polyisocyanurate foam for durability
- Features FSK facing for enhanced moisture protection
- Operates effectively in temperatures from -297°F to +297°F
- Demonstrates high-compression strength
- Tested for dimensional stability and water vapor permeability (0.02 perm)
- Meets ASTM standards including D1622, C518, D2126, E84, and E96
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville Pipe Fitting Insulation, 90° Elbow, Mineral Wool, 1 in. Thick, 4 1/2 in. ID, 1 ea.
This mineral wool pipe fitting insulation is designed for 90° pipe elbows, offering high-temperature thermal performance for various piping systems including chilled water, hot water, and high-pressure steam. These preformed, factory cut-to-length fittings are intended to save installation time in the field by providing a rigid, unslit solution that fits 4 in. pipes with an inside diameter of 4 1/2 in.
- Provides high dimensional stability and low thermal conductivity to minimize heat loss
- Features low shrinkage characteristics to reduce the potential for gaps at joints
- Rated for operating temperatures from 0°F to +1,200°F
- Complies with multiple industry standards including ASTM C547 Type I and II, ASTM E84, and UL 723
- Plenum rated for diverse mechanical and power system environments
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville 90° Elbow Pipe Fitting Insulation, Mineral Wool, 2 in Thick, 5 1/2 in ID, 1 ea
This water-repellent mineral wool insulation is engineered for 90° elbow pipe fittings, providing effective thermal control and fire resistance for commercial HVAC applications. Composed of inorganic basalt-derived fibers bonded with a thermosetting resin, the rigid, unslit design offers high dimensional stability to minimize heat loss and prevent joint gaps. It is non-combustible and suitable for use in air-handling spaces.
- Service temperature range from 0°F to 1,200°F
- Excellent thermal conductivity minimizes energy loss
- Flame spread rating of 0 and smoke developed rating of 0 per ASTM E84 and UL 723
- Water-repellent construction tested to BS EN 13472
- High dimensional stability with low shrinkage
- Easy to fabricate and install on fittings
- Plenum rated for diverse system requirements
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville Calcium Silicate Insulation Board, 4 ft x 4 ft, 1 1/2 in, 1 ea
This calcium silicate board is a high-performance insulation material designed for demanding industrial thermal applications. It provides exceptional mechanical durability and is engineered to withstand extreme heat, making it suitable for use in furnaces, kilns, boilers, and process piping. The material is formulated with an integrated corrosion inhibitor to help protect against corrosion under insulation.
- Service temperature up to 1200°F (649°C)
- Compressive strength of 100 psi (690 kPa)
- Water resistant design resists moisture absorption
- Contains integral XOX Corrosion Inhibitor®
- Non-combustible material
- Conforms to ASTM C533, Type 1 standards
- Lifespan of 25 years or more when maintained
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
JORGENSEN LABS JORVET SODA LIME 3LB
NC1862295 JORVET SODA LIME 3LB
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger TB Wood's L-Jaw Coupling Spider, Buna-N, L150, 1 ea
This Buna-N spider insert is a replacement component designed for use with L150 size L-Jaw couplings. It serves as a flexible element between two coupling hubs to transmit torque while accommodating shaft misalignment in industrial power transmission systems. The insert features an oil-resistant elastomer construction and is rated for operation at temperatures ranging from -40°F to 212°F.
- Coupling size: L150
- Outside diameter: 3 47/64 in.
- Maximum rotational speed: 5,000 RPM
- Material: Buna-N (80A durometer hardness)
- Rated torque: 1,240 in.-lb.
- Alignment capacity: 0.015 in. parallel, 1° angular
- Oil resistant properties
- Solid center spider design
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Bellco Glass, Inc. Oven Rocker Tray
Stainless steel rocker platform fit Bellco micro and mini ovens. Platform has 3 settings at 2.5 degree to 6 degrees from horizontal and adapts to existing rotisserie hardware. MADE IN THE USA
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Sheldon Manufacturing Inc BLACK PLASTIC SLAM LATCH - 3LB
This item has a minimum qty of 7 per supplier requirements.
Door latch for certain models of incubator from Sheldon Manufacturing. Please contact Sheldon Manufacturing technical services to verify the parts you neeed for service purposes.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville Calcium Silicate Block Insulation, 1700°F, 1/2 in. Thick
This high-temperature block insulation is an inorganic, non-combustible material composed primarily of hydrous calcium silicate. Designed for high-performance thermal management, it is suitable for systems operating at temperatures up to 1700°F (927°C). It meets or exceeds the physical and thermal requirements of ASTM C533, Type II, and provides reliable insulation for curved vessels, large diameter pipes, boilers, ducts, and industrial flues.
- Provides excellent resistance to damage, enhancing the life of the system.
- Tested and compliant with UL 1709 (Section 9) standards for rapid rise fire protection.
- Features a non-combustible formulation meeting ASTM E136 requirements.
- Passes rigorous corrosion testing for austenitic stainless steel.
- Essentially dust-free and contains no asbestos.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More
Grainger Johns Manville Pipe Fitting Insulation, Mineral Wool, 90° Elbow, 1 1/2 in. Thick, 1 1/8 in. ID, 1 ea.
This mineral wool insulation is designed for 90° elbow fittings in mechanical and power systems. It is factory preformed and cut-to-length to improve installation efficiency by saving fabrication time in the field.
- Provides high dimensional stability and favorable thermal conductivity to help minimize heat loss.
- Features low shrinkage characteristics to reduce the potential for gaps forming at the joints.
- Rated for a temperature range of 0°F to 1,200°F.
- Plenum rated for diverse application environments.
- Designed for 3/4 in. nominal pipe size with 1-1/2 in. wall thickness.
- Complies with various industry standards including ASTM C547, ASTM E84, and US Coast Guard 164.155.
Non-distribution item offered as a customer accommodation; additional freight charges may apply.
Learn More