Beakers
Electron Microscopy Sciences Thermotech™ PTFE Beakers 100 ml, 74 mm height, 56 mm O.D.
The beakers feature a unique combination of a pure "PTFE" Body with a specially formulated stabilized "PTFE" Carbon base as a single molding resulting in a totally inert pure "PTFE" inner surface. It is heatable to 270 degree C without distortion and has improved heat transfer. All "PTFE" Beaker caps can be used for Thermotech "PTFE" Beakers, accordingly to its sizes.
Height: 74 mm
Ace Glass, Inc. Flask, jacketed, 3L, 100mm(4in) ground Duran; O-ring groove flange, #11 Ace-Thred™; inlet/outlet for3/8in ID tubing
3L jktd cylindrical reaction flask with 100mm (4) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with #11 Ace-Thred connections on jacket inlet/outlets for use with 3/8 I.D. tubing. Flask is supplied with one CAPFE o-ring for Duran flange.
Ace Glass, Inc. 2000mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
2000mL, two-piece jacketed pressure reactor, complete with#11 Ace-Thred inlet/outlets, 100mm head with #15 center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold and stirring assembly
Sigma Aldrich Fine Chemicals Biosciences AldrichR jacketed round bo1EA
24/40 joint with two hose connections. Multifunctional-can be water cooled or heated with hot water or steam.
Ace Glass, Inc. Flask, reaction, 3L, jacketed, 168mm O-ring groove flat flange, 170mm bottom OD x 260mm H, 28/15 O-ring ball joints on jacket inlet/outlet
3L jacketed reaction flask with round bottom and 28/15 o-ring ball joints on jacket inlet/outlet. 168mm o-ring groove flat flange is used to seal a head, instead of a flat gasket. Jacketed for temperature control of ingredients. Supplied with CAPFE o-rings. Dimensions: 170mm bottom O.D. x 260mm H.
Ace Glass, Inc. Flask, jacketed, 50L, 200mm(8in) ground Duran; O-ring groove flange, 35/25 O-ring ball joint inlet/outlet
50L jktd cylindrical reaction flask with 200mm (8) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with 35/25 o-ring ball joints on jacket inlet/outlet connections. Flask is supplied with one CAPFE o-ring for Duran flange. Flask includes reference graduations.
Ace Glass, Inc. Flask, jacketed, 20L, 200mm(8in) ground Duran; O-ring groove flange, 35/25 O-ring ball joint inlet/outlet
20L jktd cylindrical reaction flask with 200mm (8) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with 35/25 o-ring ball joints on jacket inlet/outlet connections. Flask is supplied with one CAPFE o-ring for Duran flange. Flask includes reference graduations.
Ace Glass, Inc. Funnel, addition, jacketed, 1000mL, 29/32 joints, 4mm
1000mL graduated addition funnel with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is a 4mm bore PTFE plug. Bottom drip tube extends to the edge of the lower, 29/32 inner standard taper joint. Top outer reinforced joint is also 29/32. Side hose barbs are size D for 3/8 I.D. tubing.
Electron Microscopy Sciences Microbeaker Holder
Brushed aluminum rack holds six 12 mm O.D. microbeakers in unique, stepped "see-through" holes for illuminated and microscopic observation of samples. Holds 22mm and 25mm OD microbeakers.
Cole-Parmer Glass Tempering Beaker, borosilicate, 1/2" hose barbs, 250 mL
Liquid-jacketed borosilicate glass vessels have double-walled casing for circulating cold or warm tempering fluid. Tubing connectors measure 1 1⁄2"L x 1⁄2" OD. Connect a constant temperature circulator to maintain sample temperatures.
Ace Glass, Inc. PILOT PLANT BEAKER 20L PILOT PLANT BEAKER 20L
20L kilo scale, graduated beaker for mixing large volumes of measured liquids.
Ace Glass, Inc. Funnel, addition, jacketed, 500mL, 29/42 joints, 4mm PTFE stopcock
500mL graduated addition funnel with outside jacket for cooling and/or heating. Jacket extends from just below shoulder of vessel down to the bottom tube just below the stopcock. Stopcock is a 4mm bore PTFE plug. Bottom drip tube extends to the edge of the lower, 29/42 inner standard taper joint. Top outer reinforced joint is also 29/42. Side hose barbs are size D for 3/8 I.D. tubing.