Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. 20L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Chemglass Life Sciences Jacketed Beaker, 200 x 100mm ID, 250 x 120mm OD
Jacketed Beaker, 200 x 100mm ID, 250 x 120mm OD. Similar to CG-1103, but with a larger opening at the top of the jacket and a shorter overall height. Width to Height ratio on all sizes is 2:1. Beakers also have a FLAT Bottom on both the inner and outer vessel. Hose Connections have an O.D. of 10mm at the largest serration.
Ace Glass, Inc. 2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, 28/15 ballpoint inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
2000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, 28/15 ballpoint inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
Med Vet International 59mm Length Compression Plate, 8-Holes 2.4mm Diamter, J1074E
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Ace Glass, Inc. Beaker, 3L, jacketed, Ace-Safe hose connections for 1/2intubing, 225mm inside height, 133mm inside diameter
3L jacketed beaker with one upper and one lower Ace-Safe hose connection on opposite sides, for 1/2 in. tubing. Dimensions: 225mm I.H. x 133mm I.D. Does not have a pouring spout.
Ace Glass, Inc. 500mL pressure vessel body, one-piece, jacketed, #25 center, (3) #15, (1) #7 side necks, round bottom, #11 Ace-Thred connections on jacket inlet/outlet, use 3/8in tubing.
500mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.
Ace Glass, Inc. 6L jacketed filter reactor body with 150mm ID grooved top flange, #80 bottom thread, 150mm IDx350mm depth, with CAPFE O-ring, #15 Ace-Thred inlet/outlet connections, use with 1/2in ID tubing, pressure rated at 35 psi.
6L jacketed filter reactor body with 150mm ID grooved top flange, #80 bottom thread, 150mm IDx350mm depth, with CAPFE O-ring, #15 Ace-Thred inlet/outlet connections, use with 1/2in ID tubing, pressure rated at 35 psi.
Ace Glass, Inc. Immersion well, quartz, jacketed, quartz inlet, 48odx255mm
Immersion well, quartz, jacketed, quartz inlet, 48odx255mm
Ace Glass, Inc. 10L CYL,JKTD,FLASK,BP I/O
Jacketed, cylindrical kilo scale reaction flasks featuring removable flush seal valves, beaded pipe jacket inlet/outlets and bottom drain. Double-sided graduations facilitate left or right hand orientation. 10 to 20L flasks have 200mm Duran style o-ring grooved flanges while larger flasks have 300 to 400mm KF style flat flanges. All flask sizes thru 50 liter have all glass lower seals, larger flasks incorporate silicone lower seals. Low aspect ratio saves hood space. Temp range: -60°C to 200°C. Max jacket pressure: 8 psig.
Ace Glass, Inc. Funnel, 2000mL, jacketed, pressure equalizing, addition, 29/32joints, 4mm PTFE stopcock.
2000mL jacketed pressure equalizing addition funnel with 29/32 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Ace Glass, Inc. Flask, reaction, jacketed, 5L, 4in grooved flange, 28/15 O-ring ball joints on jacket inlet/outlets
5L jacketed reaction flask with a 4 grooved flange, and 28/15 o-ring ball joints on the jacket inlet/outlets. Flask should be used with a stainless steel quick release clamp. Supplied with one CAPFE o-ring (PTFE encapsulated silicone).
Ace Glass, Inc. 1000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
1000mL, two-piece jacketed pressure reactor complete with0-8mm valve and 28/15 ball joint bottom outlet, #11Ace-Thred inlet/outlets, 100mm 5 neck head, addition funnel, condenser, pressure manifold and stirring assembly
Ace Glass, Inc. 1000mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve, #11 Ace-Thred inlets/outlets for use with 3/8in .
1000mL pressure vessel body, jacketed, 100mm flange, 0-8mmvalve, #11 Ace-Thred inlets/outlets for use with 3/8in .
Ace Glass, Inc. 2000mL pressure vessel body, one-piece, jacketed, #25 center, (3) #15, (1) #7 side necks, round bottom, #11 Ace-Thred connections on jacket inlet/outlet, use 3/8in tubing.
2000mL one-piece jacketed round bottom pressure vessel with a #25 center neck, (3) #15 and (1) #7 side necks, and a #11 Ace-Thred connection for 3/8 tubing on the jacket inlet/outlet. Vessel is part of pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Rated at 45psi at 100 degrees Centigrade.