Spectroscopy Cuvettes and Cells
Fireflysci Type 30FL Micro Fluorescence Cuvette with PTFE Stopper (Material: UV Quartz) (Lightpath: 10mm)
Type 30FL Micro Fluorescence Cuvette with PTFE Stopper (Material: UV Quartz) (Lightpath: 10mm)• Cuvette has an airtight PTFE stopper which plugs into the top• Material is UV Quartz (transmits over 80% between 190-2,500nm)• Four windows and the base optically polished for fluorescence measurements• Lightpath is 10mm• Outside dimensions 12.5x12.5x49mm• Inside Dimensions- 10x2x45mm• Capacity- 0.7mL
Sigma Aldrich Fine Chemicals Biosciences HellmaR absorption cuvette1EA
with PTfE lid black side walls and base
Hach Company Round cuvettes for Lico, glass, 11 mm, disposable 560/pk
Accessories for spectrophotometers/spectral measurements of liquids.
Sigma Aldrich Fine Chemicals Biosciences HellmaR absorption cuvette1EA
Hellma(R) absorption cuvettes, standard cells, Macro with PTFE stoppers (spectral range 200-2,500 nm, pathlength 10 mm, chamber volume 3,500 muL) are available in high-performance Suprasil quartz material. The highest level of sensitivity in the measurement can be achieved by suitably selecting the cell for a specific application such that it exhibits high transmission in the spectral range of interest. The maximum of 80-90% transmission shown by empty Suprasil quartz cell is caused by the reflection loss at the four glass/air boundaries. When filled with common solvents, the cell will exhibit significantly higher maximum transmissions.
Perkin Elmer US LLC Preassembled Sealed Liquid Cell - NaCl, 0.5 mm
Sealed liquid cells have a corrosion-resistant construction, making them ideal for highly volatile samples. Each cell has a precise path length which is calibrated using the interference pattern generated by an empty cell in the beam of a spectrometer. These cells are ideal for quantitative analysis where you require an accurate reproducible cell thickness. They use a lead spacer which is amalgamated to the window material. The resultant bond forms a good leak-free seal which is effective in preventing evaporation and loss of sample. You can fill or empty liquid samples easily. The sealed liquid cell is an integral unit and cannot be disassembled. Rugged construction Easy to fill and clean Leak-free operation Calibrated for quantitative analysis Usable on all PerkinElmer FT-IR spectrometers
Perkin Elmer US LLC Preassembled Sealed Liquid Cell - KBr, 1 mm
Sealed liquid cells have a corrosion-resistant construction, making them ideal for highly volatile samples. Each cell has a precise path length which is calibrated using the interference pattern generated by an empty cell in the beam of a spectrometer. These cells are ideal for quantitative analysis where you require an accurate reproducible cell thickness. They use a lead spacer which is amalgamated to the window material. The resultant bond forms a good leak-free seal which is effective in preventing evaporation and loss of sample. You can fill or empty liquid samples easily. The sealed liquid cell is an integral unit and cannot be disassembled. Rugged construction Easy to fill and clean Leak-free operation Calibrated for quantitative analysis Usable on all PerkinElmer FT-IR spectrometers
HARVARD BIOSCIENCE INC G150F-3 GLASS CAPILLARY TUBING
Total order minimum requirement of $500. If only item on order, must order QTY of 5.Premium standard wall borosilicate capillaries, with filament, 1.5 mm x 3 in.
Starna Cells Inc FLUORIMETER MICROCELL 5MM
Square Micro Fluorometer Cell,open top,Window material: Spectrosil Quartz or equivalent, useable range: 170 to 2700 nm,Path Length:5 mm, Exterior (W x L x H): 7.5 x 7.5 x 45 mm, Interior(W x L): 5 x 5 mm ,Nominal Volume: 0.875 ml, Number Po
Cole-Parmer Jenway Quartz Cuvette, Semi-Micro, UV/Visible, 1 mL, 10 mm Path; 1/EA
Jenway Quartz Semi-micro Cuvette, 1 mL, 10 mm path, Suitable for both UV and visible regions, Quartz cuvettes are available in a wide capacity range from 50 L to 35 mL and path lengths from 10 to 100 mm. Visible % transmission: maximum from 400 to 750 nmUV wavelength % transmission: maximum from 200 to 400 nm
Andwin Scientific Disposable Cuvette, 10L x 4W x 45mm H, 500/CS
Disposable Cuvette, Two optical windows semi-micro 1.5mL with 1.2mL minimum filling Volume and 10mm path Length. UV grade methyl acrylate for excellent light transmittance down to 275nm in the UV region. 10L x 4W x 45mm H, 500/CS