Funnels
Ace Glass, Inc. 1000mL graduated cylindrical funnel, 24/40 top, 24/40 bottom
1000ML 24/40-24/40 FUNNEL
Ace Glass, Inc. 125mL graduated cylindrical addition funnel
125mL graduated cylindrical addition funnel with a 24/40 standard taper stopper joint. Stopcock and Stopper not supplied.
Ace Glass, Inc. Funnel, powder, flat side, 29/42, 145mm OD opening, 215mm height above the joint
Funnel, powder, flat side, 29/42, 145mm OD opening, 215mm height above the joint
Chemglass Life Sciences Chemglass 50 mm Pyrex Fluted Funnel, 60° Angle, Short Stem (CG-8600-50)
A 50 mm fluted glass funnel ideal for laboratory filtration and liquid transfer. It features a 60° cone angle and a short stem for compact setups; depressed inside flutings reduce filtering time by improving flow. Constructed from borosilicate glass for chemical resistance and thermal stability.
- Fluted design reduces filtering time.
- 50 mm top inner diameter.
- 60° cone angle for standard filtration.
- Short stem for compact installations.
- Borosilicate glass provides chemical resistance and thermal stability.
Chemglass Life Sciences Funnel, Separatory, 250mL, Squibb, 4mm PTFE Stpk, #22 PTFE Stopper
Funnel, Separatory, 250mL, Squibb, 4mm PTFE Stpk, #22 PTFE Stopper. Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
Chemglass Life Sciences 60mL Filter Funnel, Buchner, Improved, 24/40 Lower Vacuum Assembly, Coarse Frit
60mL Filter Funnel, Buchner, Improved, 24/40 Lower Vacuum Assembly, Coarse Frit. Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402. Improved design incorporates a delivery stem being sealed within the inner joint to prevent breakage. Funnel is supplied with a 3in piece of PTFE tubing that slides over the delivery stem. The tubing permits the funnel to be used during filtrations at higher vacuums without having the fluid pulled into the vacuum source. Overall height is without the PTFE tubing.
Ace Glass, Inc. Funnel, separatory, PTFE stopcock, 125mL, 19/22
125ml separatory funnel features a PTFE stopcock and a 19/22 taper joint with drip tip. Stopper is not included.
BURKLE INC Funnel, stainless steel, V2A, outer-Ø 5.91 in. (150 mm)
The rugged stainless steel filling funnel makes it easy to fill and transfer free-flowing powders, liquids and low-viscosity media. With an air vent on the discharge tube, it provides complete and unobstructed flow for efficient handling of a wide variety of materials.
The larger versions of the feed hopper are also equipped with a handle, which not only increases safety when handling larger fill quantities, but also improves usability in industrial environments.
Ace Glass, Inc. POR C ADJ FILT FUNNEL C POR C ADJ FILT FUNNEL C
Microscale, vacuum adapter with vertically adjustable Hirsch filter funnel that is suitable for use with all Microscale flasks and vials with standard taper 14/10 joints. This two-piece vacuum adapter features a #7 Ace-Thred at the top with a nylon bushing and O-Ring that forms a compression seal with funnel stem, bottom joint, and side hose connection. The plain stem funnel has a disc diameter of 10 mm with a capacity above disc of approximately 7 mL. Sintered disc is Porosity C (25-50 micron). Note: without funnel, vacuum adapter will accept thermometers and bleed tubes. Complete item consists of vacuum adapter with nylon bushing and FETFE O-Ring, and funnel. Use with 5/16" I.D. tubing, size A hose connection.