Stoppers
Stoppers, also known as bungs, are used to give an airtight seal to laboratory flasks and test tubes by fitting tightly inside the neck of the container and preventing material from spilling. Stoppers can be made of glass, cork, rubber, or silicone. They are typically designed with a conical shape, but straight, flanged, and tapered options are also available.
Stoppers are the preferred choice for many applications requiring a tighter seal or a greater degree of chemical resistance. They also provide a good seal when a solution needs to be shaken or mixed without spilling. Stoppers are generally cylindrical in shape and have a tapered bottom end. They may be marked with a stopper number or size on the top and bottom diameters of the stopper. Sizing can vary among manufacturers.
Stoppers are available in a solid design or with holes known as positions placed in the top. Positions allow easy access to the material contained in the sealed vessel by pipettes, tubing, or other equipment without full removal of the stopper.
What Types of Stoppers Are Available?
• Turnover stoppers have external serrations to create an excellent internal seal combined with a flexible turnover sleeve that folds down over the container’s neck to create a double seal
• Serum bottle or vial stoppers have two or three legs with external serrations or straight sides and a flanged top to create an airtight seal
• Straight bromobutyl plug-type stoppers provide a maximum seal for vials and serum bottles with a straight-wall glass finish
• Ultra-pure, straight bromobutyl plug-type stoppers provide high chemical purity and low gas permeability. They offer excellent performance during freeze drying processes such as lyophilization, where stoppers must remain stable during transfer and sublimination phases
• Silicone recessed septa stoppers are non-toxic and have external serrations to create an effective internal seal
West Pharmaceutical Services Inc 20MM NOVAPURE LYO STOPRS 2K/PK
NC3812723 20MM NOVAPURE LYO STOPRS 2K/PK
Research Products International Corp Laboratory Grade Rubber Stopper, Black SBR Rubber, Size #11 1/2, 63 x 50 x 25mm, 5 per Package
Laboratory Grade Rubber Stoppers offered in a wide range of common sizes for most laboratory applications. Available standard black SBR rubber. Solid rubber stoppers are molded in the USA according to standard industry size specification. Packaged in approximately one pound packages.
Ace Glass, Inc. Septa, red rubber, sized for 24/40 joints, sp/12
Septa, red rubber, sized for 24/40 joints, sp/12
Chemglass Life Sciences Septum Stopper, Sleeve Type, For 24/40-24/25 Outer Joints, White
Septum Stopper, Sleeve Type, For 24/40-24/25 Outer Joints, White. Sleeve type stoppers with a hollow plugs and sleeve extensions that folds down over the neck of a vessel, tubing, etc. The diaphragm can be punctured with a syringe needle, re-sealing after the needle is withdrawn.
Research Products International Corp Laboratory Grade Rubber Stopper, Black SBR Rubber, Size #12, 64 x 54 x 25mm, 5 per Package
Laboratory Grade Rubber Stoppers offered in a wide range of common sizes for most laboratory applications. Available standard black SBR rubber. Solid rubber stoppers are molded in the USA according to standard industry size specification. Packaged in approximately one pound packages.
Med Vet International Stacked Locking Hole Plate, 14 Hole, J0438LHP14
A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 3.5mm Screw Hole - 14 Plate Length - 142
