Stoppers
Stoppers, also known as bungs, are used to give an airtight seal to laboratory flasks and test tubes by fitting tightly inside the neck of the container and preventing material from spilling. Stoppers can be made of glass, cork, rubber, or silicone. They are typically designed with a conical shape, but straight, flanged, and tapered options are also available.
Stoppers are the preferred choice for many applications requiring a tighter seal or a greater degree of chemical resistance. They also provide a good seal when a solution needs to be shaken or mixed without spilling. Stoppers are generally cylindrical in shape and have a tapered bottom end. They may be marked with a stopper number or size on the top and bottom diameters of the stopper. Sizing can vary among manufacturers.
Stoppers are available in a solid design or with holes known as positions placed in the top. Positions allow easy access to the material contained in the sealed vessel by pipettes, tubing, or other equipment without full removal of the stopper.
What Types of Stoppers Are Available?
• Turnover stoppers have external serrations to create an excellent internal seal combined with a flexible turnover sleeve that folds down over the container’s neck to create a double seal
• Serum bottle or vial stoppers have two or three legs with external serrations or straight sides and a flanged top to create an airtight seal
• Straight bromobutyl plug-type stoppers provide a maximum seal for vials and serum bottles with a straight-wall glass finish
• Ultra-pure, straight bromobutyl plug-type stoppers provide high chemical purity and low gas permeability. They offer excellent performance during freeze drying processes such as lyophilization, where stoppers must remain stable during transfer and sublimination phases
• Silicone recessed septa stoppers are non-toxic and have external serrations to create an effective internal seal
Grainger Stopper Sz 0 10 mm BDia Black 0 PK100
The 16TW27 is a 16-inch diameter, two-speed, direct drive exhaust fan from Twin City Fan Companies. It features a welded steel housing with an enamel finish and is designed for general ventilation and exhaust applications. This belt drive exhaust fan has a maximum airflow of 8,050 CFM and is available in 115V or 208-230V models. The motor is totally enclosed air over (TEAO) cooled with sealed ball bearings and automatic reset thermal overload protection.
Med Vet International Endotracheal Tube, J0148U, Red Rubber, 14.0mm, Each
Available in .5mm increments from 2.5 to 16.0mm. Murphy eye. Red rubber. Hard-to-find extra-large size now available. (adaptor not included except where specified)
Med Vet International "T"-Plate, 2mm, 4 hole, 18mm L, J0428A
Available for 3.5, 2.7, and 2.0mm screws, either cortical or self-tapping. "T" plates are used almost exclusively for the repair of fractures of the distal radius. In addition, they also may be used in a partial carpal arthrodesis.
Med Vet International Compression Plate 4.5mm, 4-hole, 71mm L, J0427C
Use with 4.5mm cortical screws to produce fracture-site compression.
Med Vet International Titanium 5-Hole Plate, J1072NCT
TTA (Tibial Tuberosity Advancement) CagesTitaniumPlate 5 hole x 65mm
Med Vet International Locking Plate, 2.7mm x 9 Hole, Plate 74mm, J1132F
Locking Screws and Plates. A construct using locking plates and screws acts as an internal/external fixator. The construct is stiffer than conventional plates and screws and will require less contouring as it is not essential that the plate contacts the bone. Locking plates and screws are particularly popular in TPLO where significant savings in time (and morbidity) can be made. Also useful in fracture work in situations where contouring and rigidity is a challenge. The head of Jorvet locking screws engages the plate in the standard format using a twin start fine thread. Jorvet screws are an exact fit for standard locking plates but utilize the conventional hex screwdriver rather than a star screwdriver.Locking screws are available in both 2.7 and 3.5 screw diameters. Each size requires its own dedicated drill guide. Jorvet locking plates have ‘stacked’ locking holes which allow more screws per bone fragment compared with dual hole type plates.Locking Plates 2.7mm 9 Hole
Med Vet International Titanium 7-Hole Plate, J1072NET
TTA (Tibial Tuberosity Advancement) CagesTitaniumPlate 7 hole x 91mm
Chemglass Life Sciences Stopper, 45mm, Anaerobic Flange, Grey Bromobutyl Rubber
¿ Stopper shape, and material properties optimized to fit GL45 bottles with sizes from 100mL to 20L. ¿ Low permeability to air, gases and moisture. ¿ Manufactured from a high purity bromobutyl rubber elastomer. ¿ Conforms to EP 3.2.9 Type I closure for chemical and penetration tests. ¿ Material is virtually free of organics that might leach into the incubation medium. ¿ Elastic material for effective sealing and reliable self-sealing after needle piercing. ¿ Upper surface features seven numbered hemispherical impressions for needle-piercing. ¿ Wide usable temperature range: -50 to +121 ¿C. ¿ Suitable for autoclaving / steam sterilizing at 121 ¿C for 20 minutes.
WEST PHARMACEUTICAL SERVICES INC 100710 VIAL STOPPER NOVAPURE
NC3443875 100710 VIAL STOPPER NOVAPURE