Cell Culture Flasks
Chemglass Life Sciences Spinner Flask, 100mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass. Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences Spinner Flask, 500mL, Dimpled Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 1l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately
Ideal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 1l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately
Bellco Glass, Inc. Glass Ball Spinner Only,3000mL No Ctr Cap
Description: Glass Ball Spinner Flask Only. MADE IN THE USASize: 3000mLMaterial: Type 1 Class A Borosilicate GlassDimensions: 165mm OD x 290mm Overall Height, 268mm across sidearmsTwo 45mm Sidearms angled 53° offset center100mm Screw Thread Center NeckDimpled BottomGraduations: 500mL to 3000mL, every 500mL – White Ink (Approx Volumes)Supply with: Two 45mm PP Blue Screw Caps & PP Blue Pouring Rings
Bellco Glass, Inc. Flat Bottom AHB Spinner , 500mL No Ctr Cap
Adjustable Hanging Bar Spinner Flask without Bottom Dimple. MADE IN THE USAPTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps.100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 500mL. Center cap: 100mm, side arm 45mm. Dimensions: 110 OD x 185 OAH
Chemglass Life Sciences Spinner Flask, 3000mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences Spinner Flask, 6000mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Bellco Glass, Inc. Flat Bottom AHB Spinner , 100mL No Ctr Cap
Adjustable Hanging Bar Spinner Flask without Bottom Dimple. MADE IN THE USAPTFE impeller assembly rides on glass bearing for friction free operation. 25 & 50mL have black phenolic rubberlined center and sidearm caps.100mL-300mL have polypropylene caps, silicone gasket and pouring rings accumulation of microcarrier beads under impeller. 100mL. Center cap: 70mm, side arm 32mm. Dimensions: 69 OD x 110 OAH
Chemglass Life Sciences Spinner Flask, 500mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Chemglass Life Sciences Flask, Shake, 3000mL, 6 Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340
Flask, Shake, 3000mL, Deep Baffles, Delong Neck, Approx OD x Height (mm): 185 x 340. Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit Stainless Steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.
Bellco Glass, Inc. IOB w/ MicroCarrier Flask,3L
Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. MADE IN THE USA. Cap size: 100mm Flask size: 3l Dimensions: 165 x 300mm Sidearm cap: 45mm
Chemglass Life Sciences Spinner Flask, 6000mL, Dimpled Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. Glass Ball Spinner Complete,1000mL
Description: Glass Ball Spinner Comp, 1000mL. MADE IN THE USASize: 1000mLMaterial: Type 1 Class A Borosilicate GlassFlask Dimensions: 135mm OD x 240mm OAH, two 45mm sidearms offset at 60º, 100mm center neckIncludes two 45mm blue PP screw caps & two 45mm blue PP pouring ringsImpeller Assembly: one 100mm blue PP screw cap, 100mm Teflon cap seal, 100mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnetSpecially Formed Bottom Indent Prevents Accumulation under impellerGlass ball houses a magnet for gentle agitation of Micro carrier Beads
Bellco Glass, Inc. MicroCarrier Spinner Flask complete,6L
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 6l Center Cap:100mm Sidearm cap: 45mm OD X OAH:204 X 410