Cell Culture Flasks
Biopioneer T75 CELL CULTURE FLASK, 100/CS
CellMAX T75 Cell Culture Flask, 5/pk, 100/cslimit 10 cases per order
Chemglass Life Sciences Impeller Assembly Only, for 1L & 3L Adjustable Hanging Bar Spinner Flasks
Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks.
Chemglass Life Sciences 12mm GL-45 Probe Holder, Compression Style
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Thomson Instrument Company Optimum Growth 250mL Flask, w/ Sampling Port and Vent Cap, Sterile
Thomson’s Optimum Growth Sampling Flasks feature integrated one-way valves that enable aseptic sampling directly in the shaker or on the benchtop, helping reduce contamination risk and improve efficiency—especially in high-throughput environments.
•Available in 125 mL, 250 mL, 500 mL, and 5 L sizes with integrated one-way sampling valves
•Aseptic sampling without removing the cap—simply connect a syringe and collect samples
•Enables sampling without removing flasks from shakers or moving them to biosafety cabinets
•Streamlines workflows and minimizes time, contamination risk, and handling complexity
•0.2 µm PTFE vented caps support sterile gas exchange and maintain culture integrity
• Made in the USA
Biopioneer T75 TREATED,STERILE,100/CS
T75 treated, sterile, 5 per sleeve, 100/cs limit 5 cases per order
Chemglass Life Sciences BioProcess Spinner Flask, 3, 000mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences BioProcess Spinner Flask, 100mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences BioProcess Spinner Flask, 500mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences 2-Port Assembly for 1L Media Bottles Only, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Sarstedt Inc T25 Tissue Culture Flask, Red Ventilated Cap for Adherent Cells, 300/Cast
T25 Tissue Culture Flask Canted Neck Red Ventilated Cap for Adherent Cells
Chemglass Life Sciences Flask, Fernbach, 2800mL, 38mm OD Delong Top, 3 Side Baffles, Approx OD x Height (mm): 210 x 260
Flask, Fernbach, 2800mL, 38mm OD Delong Top, 3 Side Baffles, Approx OD x Height (mm): 210 x 260. Flasks are designed for culturing organisms that require a large surface area to volume ratio. Flask has 3 baffles on lower outside edge to help oxygen transfer to the culture medium.
Chemglass Life Sciences Flask, Trypsinizing, 4L, 205mm Dia x 360mm OAH
Flask, Trypsinizing, 4L, 205mm Dia x 360mm OAH. Manufactured from Type 1 Class A borosilicate glass with FOUR deep side baffles for optimum agitation during trypsinization. Flask comes with beaded, break-resistant lips and 50mm OD necks. Sold 1 per case.
Chemglass Life Sciences Spinner Flask, 500mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Ace Glass, Inc. 3000mL vacuum trap flask only 180 x 410mm
3000mL round bottom vacuum trap flask. Flask dimensions: 180mm x 410mm.
Chemglass Life Sciences Flask, Erlenmeyer, 2000mL, Sterile, Baffled, Polycarbonate, 53-B, with Blue Duo Cap, BULK PACK
Flask, Erlenmeyer, 2000mL, Sterile, Baffled, Polycarbonate, 53-B, with Blue Duo Cap, BULK PACK. Quadruple baffled Erlenmeyer flasks are sterile, non-pyrogenic and manufactured with polycarbonate resin. Flasks are supplied with exclusive DuoCap designed for both aerobic and anaerobic applications (for aerobic applications the cap utilizes a 0.22m pore size PTFE membrane for sterile air exchange; for anaerobic applications the cap can easily be converted to a solid cap design). Solid top caps are also ideal for applications requiring mixing, shaking and storage of biological fluids. Graduations are molded for accuracy.EZ-Tear packaging allows for easy access.