Pump Plunger Assemblies
Waters Corporation Flange, KF25, Blank
This KF25 blank flange is an essential spare part for maintaining various systems.
- Categorized as a service part or kit.
- Designed for use as a spare part.
BURKLE INC Thread adapter S64x5 outer- S55x5 (DIN51) inner, black
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
Grainger Black Pipe Nipple Threaded 1/2x1-1/2 In
The Beck Nipple is a black anodized steel nipple with National Pipe Thread (NPT) connections. It has a pressure rating of 2000 psi at 70°F and is made from ASTM A733 carbon steel. The nipple has a wall thickness of 0.154 inches, is 3 inches in length, and has 1/2 inch NPT threads on both ends. It can be used to connect and extend threaded pipe. The nipple is black anodized for corrosion resistance.
PFEIFFER VACUUM INC Pfeiffer Vacuum HiScroll Dry Scroll Pump, C-Version, Corrosive, 18.1 m³/h, Manual Gas Ballast
The HiScroll 18 C-Version Corrosive Dry Scroll Pump is an oil-free, high-performance pump designed for demanding applications involving corrosive gases. It offers steady pumping speed, low noise levels, and reduced energy consumption.
- Corrosive gas ready with FFKM check valves, DLC-coated components, and stainless steel flanges.
- High quality performance with steady pumping speed and short cycle times.
- Low noise levels and lower energy consumption.
- Dry and oil-free pumping principle.
- Safe operation via standard non-return valve and hermetically sealed pumping system.
- Simple installation, setup, and short maintenance intervals for low operating costs.
- Integrates with external systems via RS-485 or ProfiNet/EtherCAT interfaces.
- Suitable for chemical processing, mass spectrometry, and general laboratory applications.
BURKLE INC PP barrel pump with discharge hose/stopcock, 19.69 in. (50 cm)
Barrel pumps made of polypropylene allow a fast transfer of liquids from barrels, canisters and tanks.
The low-mounted non-return valve of the barrel pump and the immersion depth that can be steplessly adjusted using the barrel screw joints ensure good removal of residual liquid. The barrel screw joint fastens the barrel's pump securely to the barrel. Barrel screw joints and thread adapters for commercially available containers are available as optional accessories.
