Vacuum Tubing
Accuflow Systems Saint-Gobain Tygon Tubing, 3 mm ID, 5 mm OD, Clear
Tygon S3 E-3603 tubing is a clear, flexible laboratory tubing formulated for general laboratory and instrumentation connections that require non-contaminating, vacuum-capable tubing. The tubing has a smooth inner wall for easy flow and visual monitoring, a bio-based non-DEHP formulation, and is compatible with common sterilization methods.
- Bio-based non-DEHP formulation.
- 3 mm inside diameter, 5 mm outside diameter, 1 mm wall thickness.
- 15 m (49 ft) continuous length.
- Withstands full vacuum at room temperature (760 mm Hg).
- Maximum recommended temperature 74 °C (165 °F).
- Smooth inner wall for unobstructed flow and visual monitoring.
- Compatible with autoclave (121 °C, 30 min at 15 psi) and ethylene oxide sterilization.
- No BPA or phthalates intentionally added.
- Flexible and crack-resistant, slips over fittings easily.
Accuflow Systems Saint-Gobain Tygon Tubing, 1 in ID, 1-3/8 in OD, Phthalate-free
Tygon B-44-4X tubing from Saint-Gobain is a food- and dairy-grade flexible tubing designed for sanitary filling, draining, transfer, and processing applications. It provides excellent clarity for visual inspection, a smooth nonporous bore for hygienic fluid handling, and formulations free of BPA and phthalates.
- 1 in inside diameter (25.40 mm)
- 1-3/8 in outside diameter (34.93 mm)
- 3/16 in wall thickness (0.1875 in, 4.76 mm)
- Phthalate-free formulation
- Suitable for food, milk, and dairy transfer and processing
- Complies with FDA food additive regulations, NSF-51, NSF-61, and 3-A
- Working and burst pressures are test-derived; verify suitability under application conditions
Foxx Life Sciences EZBio Vactrap S Vacuum Trap Bottle (Vacuum Flask Alternative) for Aspiration & Vacuum Protection, Shatterproof 4L Aspirator Bottle Assembly, Autoclavable,Polypropylene, Inline Vent Filter, No Secondary Container, Sterile, 1/EA
EZBio Vactrap S is a sterile vacuum trap system for cleanroom bioprocessing, protecting vacuum lines, pumps, and personnel from hazardous liquids and biohazards. It safely contains waste from supernatant removal, chemical separation, and cell culture media aspiration. One bottle collects contaminated fluids for decontamination, while a second serves as overflow protection. A hydrophobic inline filter prevents aerosol spread.
Features
Pre-assembled, sterile, and double-bagged for cleanroom use
Secondary containment prevents spills and overflows
Shatterproof for enhanced safety
Wide-mouth design for easy cleaning
Tube holder prevents spills when not in use
EZBio HP vent filter with 0.2 µm PTFE membrane blocks bacterial aerosols
40 CFR 264.175 compliant
Applications
Cell culture media aspiration
Supernatant removal
Chemical separation in biopharma
Waste collection in high-purity processes
Safe biohazardous waste handling
EZKEM Pump Tubing Orange/Orange0.035 ID 6x36 12pk
EZkem’s 2-stop 6″ collar x 36″ length peristaltic pump tubing is used for Ismatec peristaltic pumps in Alpkem, OI Analytical, Latchat and other brands of autoanalyzers for flow injection (FIA) and segmented flow (SFA) analysis. A000352 Orange/Orange 0.035ID 12/pk
Accuflow Systems Single braid Reinforced Tubing
Purity One™ OneSil single-braid reinforced biopharmaceutical grade silicone tubing has been formulated for demanding high-pressure applications in biopharmaceutical processing. This flexible silicone tubing is moldable for single-use assemblies and has higher pressure ratings than non-reinforced tubing, making it an excelling choice for bulk transfer, SIP/CIP, filtration, and buffer and media prep. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems Platinum-cured Silicone Tubing
Purity One™ OneSil 65D biopharmaceutical grade silicone tubing has been formulated for demanding and critical fluid transfer applications in biopharmaceutical processing. This general use silicone is moldable for single-use assemblies, has higher pressure ratings and better kink resistance than traditional 50D silicone tubing, and has a large temperature range, making it an excellent choice for applications such as sampling, filtration, sterile filling and transfer, and buffer and media prep. Full validation guide and USP <665> Extractables testing available.
ATLANTIC BIOPHARM SOLUTIONS LLC 6IN PLATINUM SILICONE TRICLAMP
6in Platinum Silicone Tri-Clamp Gasket
Accuflow Systems Saint-Gobain FEP Tubing, 1/8 in x 1/4 in, 50 ft
Pharma-grade FEP tubing engineered for high-purity fluid transfer in laboratory, bioprocess, and analytical applications. The tubing offers low adsorption, wide chemical compatibility, and compatibility with common sterilization methods for single-use or reusable assemblies.
- Material: FEP fluoropolymer.
- Inner diameter: 1/8 in (0.125 in, 3.2 mm).
- Outer diameter: 1/4 in (0.250 in, 6.4 mm).
- Wall thickness: 0.062 in (inferred from OD and ID).
- Coil length: 50 ft.
- Temperature range: -73°C to 203°C (-100°F to 400°F).
- Chemical resistance: Excellent resistance to acids, bases, and solvents.
- Sterilization: Autoclavable (30 min at 121°C) and ethylene oxide compatible.
- Color and properties: Translucent, low water absorption, Shore D hardness ~55.
Accuflow Systems Saint-Gobain PharMed BPT Tubing, 1/8 in ID, 1/4 in OD
PharMed BPT tubing is a biocompatible, high-performance peristaltic pump tubing formulated for sensitive bioprocess and diagnostic applications. It delivers extended flex life and chemical resistance compared with standard silicone tubing, and supports common cleaning and sterilization methods.
- 1/8 in inner diameter, 1/4 in outer diameter, 25 ft length.
- Opaque cream appearance, Shore A 64 hardness.
- Meets USP Class VI, USP <87>, and ISO 10993-5 biocompatibility standards.
- Autoclavable for repeated cycles; compatible with gamma sterilization up to 50 kGy.
- Temperature range up to 275 °F (135 °C); low temperature embrittlement at -75 °F (-59 °C).
- Very good chemical resistance; excellent resistance to acids, alkalis, and oxidizers.
- Superior peristaltic pump performance versus silicone; demonstrated 1,000+ hours in comparative tests.
- Opaque to visible and UV light, protecting light-sensitive fluids.
Cole-Parmer Fitting, 316L Stainless Steel, Straight, Eccentric Sanitary Clamp Reducer, 2" x 1"
Use these 316L stainless steel sanitary fittings in the food, beverage, and pharmaceutical industries. They provide excellent chemical compatibility and corrosion resistance while offering a leak-proof connection; use with our SS clamp for a secure seal. Easily remove to clean or use Clean-in-Place (CIP) process to reduce the chances of dirt and bacteria contaminating the process.
Accuflow Systems Tygon Tubing, 3/16 in ID, 7/16 in OD, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible laboratory tubing designed for medical, diagnostic, and general-purpose fluid transfer where chemical compatibility, visual inspection, and dimensional consistency are required.
- Inner diameter: 3/16 in (4.8 mm)
- Outer diameter: 7/16 in (11.1 mm)
- Wall thickness: 1/8 in (3.2 mm)
- Package length: 50 ft (15 m)
- Material: thermoplastic elastomer tubing
- Durometer: 56 Shore A
- Maximum working pressure (73°F): 47 psi (3.2 bar)
- Temperature range: brittle temperature -51°F (-46°C); maximum recommended operating temperature 165°F (74°C)
- Color: crystal-clear
- Typical applications: medical and diagnostic systems, IVD analyzers, instrumentation fluid transfer
- Additional properties: low extractables, resistance to flex-fatigue, phthalate-free and BPA-free formulation
Cole-Parmer Luer to Hose Barb Fitting, Straight Adapter, Animal-Derivative-Free Polypropylene, Cleanroom Packed, Female Luer x 1/4" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Quickly and easily transition from soft tubing to a luer connection using these adapters. Luer fitting is a standardized system comprised of a male taper and a female mating part that provides a leak-free connection. A single barb on one end of the fitting creates a tight seal to keep the tubing in place. These animal-derivative-free polypropylene fittings are radiation stable and resistant to solvents, chemicals, water, strong mineral acids, bases, and other inorganic environments. Not recommended for use with oxidizing agents.
Cole-Parmer C-Flex 374 TPE Tubing, 3/4" ID x 1-1/8" OD; 15 Ft
Excellent heat seal and sterile weld capabilities make it ideal for biopharma applications
Easily meet the critical demands of pharmaceutical and biopharma applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress. Translucent tubing enables visual monitoring of the flow, so you can control or adjust the flow during the process.