Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Electron Microscopy Sciences EMS Staining Plate for Electron Microscopy
The EMS Staining plate for Electron Microscopy was developed by Dr. Miguel Berrios, at SUNY at Stony Brook. The chemical etching process, antibody incubations and final staining with heavy metal salts of each grid is performed in the small cone-shaped wells on the EMS staining plate.
The base plate is a solid piece of chemical-resistant silicone with 96 cone-shaped wells organized in parallel rows of eight, using the lid of a 96-well Falcon 3072 Microtest III Plate as a cover. The base has two notches to serve for orientation and a lip where the cover rests. Each well is an inverted cone 7 mm in diameter and 2 mm deep. Grids either float or rest at the bottom of each well. The wells allow incubation of a grid in 12-60 microliters of solution without reagent loss due to adsorption or cross contamination, even when the plate is tilted up at 70 degree. Due to the shape of the well, the flat surface of the grids never come into contact with the walls of the well.
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,200 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Accuflow Systems MSTRFLX TBNG PURIFLEX #35 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex Tubing Puri-Flex, L/S 35, 25 feet Long life tubing for any Masterflex pump used in your pharma and bioprocess applications Applications: Cell and tissue culture work, pharmaceutical biotech
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 5/32"" ID x 1/4"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Grainger Hose, PVC Braid, Clear, 1.025" OD, 3/4", 100 ft, Roll
The FARPVC1712-100P is a 100 foot roll of 1/4" ID, 3/8" OD clear PVC braided reinforced hose from Flex-A-Prene. This flexible hose is made of PVC with a polyester braid reinforcement and has a pressure rating of 150 PSI. It has a temperature range of -20°F to 150°F. The inside diameter is 1/4" and outside diameter is 3/8". This general purpose hose is suitable for air, water and many chemicals. The hose is sold by Grainger in a 100 foot roll.
AVANTOR MASTERFLEX (VWR LLC) Catalyst Stopped Tubing Assembly, Platinum-Cured Silicone, 4.8 mm ID, 6 pk
Start pumping with little effort, as preconfigured links aid quick and easy setup. Ensure the optimal amount of tubing is in the pump head. Use with the Catalyst extension coils / tubing to complete your system.
Chemglass Life Sciences FEP Tubing; 3/4" OD x 5/8" ID x 10ft Long
FEP Tubing; 3/4" OD x 5/8" ID x 10ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 3/16"" X 1/4 ""- 50 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
AVANTOR MASTERFLEX (VWR LLC) TBNG MFLEX TYGON ELFL 24 25FT
Masterflex L/S High-Performance Precision Pump Tubing, Tygon S3™ E-LFL , L/S 24; 25 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 0.25MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 0.25 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Coiled FEP, 1/4"" ID x 3/8"" OD; 2 ft
Our retractable coil FEP tubing offers the chemical inertness of our standard FEP tubing combined with the flexibility of a coil. FEP tubing has excellent heat resistance, a low coefficient of friction, and won't deteriorate with age. Tubing withstands temperatures from -454 to 400¿F (-270 to 205¿C); and can be sterilized by autoclave, with ethylene oxide, or by using dry heat. Choose the size and length that best fits your application. Use tubing with compression fittings.
AVANTOR MASTERFLEX (VWR LLC) 3-STP VITON 2.06MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Viton, 2.06 mm ID; 12/PK, Avantor
ATLANTIC BIOPHARM SOLUTIONS LLC 10IN PLATINUM CURED SILICONE
10in Platinum Cured Silicone, Tri-Clamp Gasket, Translucent Material, Flanged
Grainger Corrugated Tubing Nylon 1/2 in 100 ft
The 1/2" Corrugated Loom Tubing by Electriduct is a flexible split loom tubing made of polyethylene and used to bundle and protect wires and cables. It has an inside diameter of 1/2", is sold by the foot, and is available in black color. The tubing features a corrugated exterior which allows it to easily flex and bend. It can withstand temperatures between -20°F to 176°F. The split design allows for quick and easy wire insertion without having to thread the ends. This abrasion resistant tubing helps prevent shorts and damaged wires. It can be used for a wide variety of wiring applications.