Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Pacer Global LLC Saint Gobain SaniTech Ultra-C Tubing 0 5 ID 0 625 OD 0 0625 Wall 50 Foot Coil 1/EA
Saint Gobain SaniTech Ultra-C Tubing 0 5 ID 0 625 OD 0 0625 Wall 50 Foot Coil 1/EA
Perkin Elmer US LLC CT-Flex Corrugated Teflon FEP Tubing - 0.25 in OD
CT-Flex Corrugated Teflon FEP Tubing shapes and flexes easily and can take tortuous paths. It features a practically zero-bend radius and can be extended or compressed without affecting the inner diameter. CT-Flex resists chemicals, elevated temperatures, cut-through, and strain. CT-Flex is made from Teflon FEP, has read-thru transparency and has FDA approval under regulation 21 CFR 17.1650. The non-wetting surface of CT-Flex means easy clean-out, so batch-to-batch contamination is not a problem. Teflon FEP contains no plasticizers or filler to leach out and contaminate the product stream. Other features include: Vacuum Service: 29.9 in Hg. Extension/Compression Length Ratio: 2:1 Max Continuous Service Temperature: 200°F (0 pressure)
Avantor Fluid Handling Transfer Tubing Assembly, Gamma Irradiated, Animal-Derived Component Free, 50 Units
The Avantor Fluid Handling XFER Tubing Assembly is a reliable single-use fluid transfer solution ideal for scientific and bioprocessing applications. Manufactured under strict standards, it features gamma irradiation for optimal sterility (SAL 10^(-6)) and is compliant with USP Class VI for biocompatibility. Its animal-derived component free (ADCF) materials ensure high safety levels. Conveniently packaged single-bagged, this assembly stands out for its high sterility assurance, making it an essential choice for critical fluid pathways.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/8"" ID x 3/16"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
Grainger Corrugated Tubing Nylon 1/2 in 25 ft
The Corrugated Loom Tubing 1/2" is a flexible, corrugated tubing made of polyethylene that provides protection for wires and cables. It has an inside diameter of 1/2", is sold by the foot, and is available in black, gray, and yellow colors. The tubing features a spiral cut design for easy wire insertion and has excellent abrasion resistance. It can withstand temperatures from -20°F to 176°F and is designed for both indoor and outdoor applications including wire harnesses, cable bundles, and anywhere that requires protecting wires from dust, moisture and abrasion. This tubing meets military specification MIL-T-21038 and is made in the USA.
Grainger Corrugated Tubing PE 5/16 in 25 ft
The Grainger 16Y251 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads are made in the USA and can be used for a variety of cleaning applications including pots, pans, dishes, walls, floors, grills and more. The open web design allows debris to move through the pad during cleaning.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMED 18 400FT
Masterflex L/S Spooled Precision Pump Tubing, PharMed BPT, L/S 18; 400 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING TYGN LMT55 6.4 15M 50FT
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 6.4 mm ID x 11.1 mm OD; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGN LMT55 12.7 3.2 15M
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 12.7 mm ID x 19 mm OD; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING TYGN LMT55 9.5 15M 50FT
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 9.5 mm ID x 12.7 mm OD; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON ELFL 1.14MMID 100FT
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 1.14 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX TYGONCHEM 15 50FT
Masterflex L/S High-Performance Precision Pump Tubing, Versilon™ 2001, L/S 15; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG 2.54MM ID 100FT
Masterflex Ismatec Pump Tubing, Tygon E-Lab, 2.54 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX TBNG 0.89MM ID 100FT
Masterflex Ismatec Pump Tubing, Tygon E-Lab, 0.89 mm ID; 100 ft, Avantor