Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) C-Flex Animal-Derived Component Free (ADCF) 3/8 x 5/8"" Tubing, 50Ft
Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Transparent. Certification: Resin meets USP and Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX NORPRENE 73 50FT
Masterflex I/P Precision Pump Tubing, Versilon™ A-60-N, I/P 73; 50 ft, Avantor
MSC Value Collection S-Hook, Carbon Steel, Bright Zinc, 1-1/8 in Length
This product is a pack of 50 S-hooks, crafted from durable carbon steel with a bright zinc finish. Each hook measures 1-1/8 inches in overall length and features a wire size of 0.105 inches.
- Pack of 50 S-hooks
- Constructed from carbon steel
- Features a bright zinc finish
- Overall length of 1-1/8 inches
- Wire size is 0.105 inches
Cole-Parmer Thermoplastic (SEBS) Tubing, 1/16" ID x 3/16" OD; 50 Ft
Designed for the most demanding biopharmaceutical applications, the thermoplastic SEBS (styrene-ethylene-butylene-styrene) tubing exhibits superior gas barrier properties and excellent pressure performance. Use the tubing in peristaltic pumps, single-use assemblies, process filling, and sampling devices.
Thermoplastic (SEBS) tubing does not contain BPA, phthalates, PVC, or peroxides that can leach out into the fluid, making it ideal for pharmaceutical applications, buffer and media preparation, and cell media processing. For an added level of particle control, a liner is placed between the tubing package and the box.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PharMed BPT, 1/32"" ID x 5/32"" OD; 25 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
Grainger Corrugated Tubing Nylon 5/16 in 100 ft
The Corrugated Loom Tubing from Grainger is a flexible, split, corrugated loom tubing made of polyethylene. It has an inside diameter of 5/16 inches and is sold in 25 foot lengths. The tubing provides protection against abrasion and moisture for wires and cables. It has operating temperatures between -20°F to 176°F. The tubing meets military specification MIL-I-631D and is UL recognized to UL 224 and CSA C22.2 No. 198.1. It comes in black color.
Grainger InsulMultitapCon PVC 6 AWG 3/0 AWG
The Polaris Insulated Multitap Connector is an electrical connector that allows multiple wires to be connected to a single point. It is rated for 600 volts and can accommodate wire sizes from 14-10 AWG. The connector has a maximum temperature rating of 105°C and is made from high-quality thermoplastic. It features a lever-style wire clamp for easy installation and secure wire retention. The connector body measures 2.56" x 1.5" x 1.31" and has 4 ports to connect multiple wires. It can be mounted via the .31" diameter hole on the connector body. The connector meets UL and CSA standards for safety.
Accuflow Systems Saint-Gobain Tygon Tubing, PVC, 3/16 in ID, 50 ft
Saint-Gobain Tygon E-3603 tubing is a crystal-clear, flexible PVC tubing designed for reliable fluid transfer and visual monitoring in laboratory and bioprocess applications. It offers a smooth inner bore to minimize buildup and a phthalate-free formulation suitable for general lab use.
- Crystal-clear flexible PVC construction for visual monitoring.
- 3/16 in inner diameter, 5/16 in outer diameter, 1/16 in wall thickness.
- Supplied in 50 ft coils for bulk lab use.
- Maximum operating temperature 165 °F (74 °C).
- Maximum working pressure 25 psi (1.7 bar).
- Bend radius 5/8 in (15.9 mm) for tight routing.
- Phthalate-free formulation with low extractables.
- Glassy-smooth inner bore resists buildup and eases cleaning.
Ace Glass, Inc. PTFE tubing, 1.5mm ID, 0.3mm wall, 3 meters
PTFE tubing, 1.5mm ID, 0.3mm wall, 3 meters
Pacer Global LLC Saint Gobain 072 C-Flex TPE Tubing, Opaque, 0.188'' ID, 0.313'' OD, 0.0625'' Wall, 50 Foot Coil, 1/EA
Saint-Gobain - 072 C-Flex TPE Tubing, Opaque, 0.188" ID, 0.313" OD, 0.0625" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 1'' ID, 1.375'' OD, 0.1875'' Wall, 15 Foot Coil, 1/EA - 374-1000-6
Saint-Gobain - 374 C-Flex TPE Tubing, 1" ID, 1.375" OD, 0.1875" Wall, 15 Foot Coil, 1/EA
Waters Corp PTFE Tubing, 1/4 in O.D., 0.19 in I.D., 10 ft Length
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
- Provides leak-free connections
- Features low dead volume
- Designed for minimal band spreading
- Components are clean and designed to work together for best performance
- Geometry of ferrule and conical port must match
- Diameter of tube and fittings must match
- Variety of materials, lengths, and diameters are available for system setup and maintenance