Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Climet Instruments 1/4ID3/8INOF SAMPLETUBING 1FT
This item has a minimum qty of 17 per supplier requirements.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/8"" ID x 7/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing Microbore PTFE, 0.042"" ID x 0.066"" OD; 100 ft/roll
Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is ¿400 to 500¿F (¿240 to 260¿C); melts at 620¿F (327¿C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL-recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/32"" ID x 5/32"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/16"" ID x 5/16"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Metric PTFE, 4.48 mm ID x 6.00 mm OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP 23 Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: With autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 3/16"" ID x 1/4"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured PTFE, Blue, 3/16"" ID x 1/4"" OD; 12 ft
Applications: Ideal for dedicated or multiple lines¿provides quick and easy line identification. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Opaque. Certifications: None. Temperature range: -400 to 500¿F (-240 to 260¿C). Sterilize: Autoclave, ethylene oxide, or dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Microbore PTFE, 0.022"" ID x 0.042"" OD; 100 ft/roll
Use this translucent tubing in extreme temperatures and in harsh chemical environments. It's chemically inert, has low permeability, and has the lowest friction coefficient of any tubing. Temperature range is ¿400 to 500¿F (¿240 to 260¿C); melts at 620¿F (327¿C). Tensile strength is 2500 to 4000 psi. PTFE tubing resin is UL-recognized and complies with FDA (21 CFR 177.1550) and USP Class VI requirements.
Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/4 in I.D., 3/8 in O.D.
Tygon ND 100-65 is a crystal-clear, medical-grade, non-DEHP flexible tubing formulated with a TOTM plasticizer for use with bodily fluids and medical devices. It is supplied as 50 ft continuous lengths and is suitable for applications requiring USP Class VI biocompatibility and compatibility with common sterilization methods.
- Crystal clear for visual monitoring of fluid flow.
- Non-DEHP formulation (TOTM plasticizer) for reduced plasticizer migration.
- 1/4 in inner diameter, 3/8 in outer diameter, 1/16 in wall thickness.
- Supplied as 50 ft continuous length.
- Maximum suggested working pressure 30 psi at 73°F.
- Minimum bend radius 1 in for routing and handling.
- Vacuum rating 25 in Hg at 73°F.
- Meets USP Class VI and REACH compliance.
- Compatible with EtO, gas, and gamma sterilization methods.
- Non-wetting surface permits complete drainage.
Accuflow Systems Saint-Gobain Fuel and Lubricant Tubing, PVC, 1/4 in, 50 ft
Flexible tubing formulated for fuel and lubricant transfer that resists swelling, hardening, and embrittlement caused by hydrocarbon-based fluids. Translucent yellow construction allows visual flow monitoring. Supplied in 50 ft coils for small-engine and industrial fluid transfer applications.
- Resists swelling and hardening from hydrocarbon fuels.
- 1/4 in inner diameter, 3/8 in outer diameter, 1/16 in wall thickness.
- Translucent yellow for easy flow monitoring.
- Maximum recommended operating temperature 165°F (74°C).
- Maximum working pressure 30 psi at 73°F.
- Bend radius approximately 1 in for routing in tight spaces.
- Sold in 50 ft package length.
Scientific Commodities Inc PE Tubing | 1.57x2.08MM | 100ft
This non-sterile rigid but flexible micro medical grade polyethylene tubing has excellent chemical and gas resistance. It works extremely well in applications with vacuum or pressure. It can be sterilized with ethylene oxide or electron beam. This milky white translucent tubing is non-radiopaque and is non-reactive to tissue. Will not impart taste and odor.
AVANTOR MASTERFLEX (VWR LLC) ChemFluor TSPTFE-0125-031 PTFE Tubing, 1/16"" x 1/8""; 50 ft/Pk
Applications: Chemical transfer and pharmaceutical processes. Characteristics: Most flexible fluoropolymer. Excellent chemical compatibility. Translucent. Certification: FDA compliant. Temperature range: ¿450 to 550¿F (¿268 to 288¿C). Sterilize: Autoclave, ethylene oxide, or dry heat.