Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
New Jersey Fluid Systems LLC SS-4-HC-1-8, 1/4 IN. HOSE ID
Stainless Steel Hose Connector, 1/2 in. Male NPT, 1/4 in. Hose ID
US Plastic Corporation 1/4" ID x 3/8" OD x 0.062" Wall Natural Polypropylene Tubing
Polypropylene is ideal for transferring hot liquids or gases, or where higher temperatures and pressures are expected. It has many uses in manufacturing operations where extreme resistance to acids and alkalis is required.
Holland Applied Technologies C-FLEX374 TUBING .125X.25 50FT
This item must be ordered in multiples of 8 per supplier requirements
Perkin Elmer US LLC Standard PVC Three-Stop Peristaltic Pump Tubing - 3.18 mm I.D., Black/White/Black, Pkg. 12
This Three-Stop Peristaltic Pump Tubing is designed for use with the FIAS, FIMS, and the S10 Autosampler. This clear tubing ships as a package of 12.
Ace Glass, Inc. FEP tubing, 1/8in OD x 1/16in ID, 10ft length
1/8 O.D. x 1/16 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.42MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.42 mm ID; 12/PK, Avantor
Pacer Global LLC Saint-Gobain - 082 C-Flex TPE Tubing, 0.375'' ID, 0.5'' OD, 0.0625'' Wall, 500 Foot Coil, 1/EA - 082-375-2S
Saint-Gobain - 082 C-Flex TPE Tubing, 0.375" ID, 0.5" OD, 0.0625" Wall, 500 Foot Coil, 1/EA
Accuflow Systems Altafluor 100 PTFE (polytetrafluoroethylene) - 100 PTFE 1/16"" X 1/8"" - 50 FT
Altafluor 100 PTFE was the original TEFLON material developed by E.I.DUPONT CO. PTFE is the most flexiible of all fluoropolymers offered. It has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications. Non-flammable. Non-toxic. FDA compliant -21 CFR 177.1550. Very low permeability. Altafluor 100 is compatible with most standard fittings (not suitable for use with flare-type fittings). Applications include use in laboratories, chemical processes, analytical and process equipment, crogenic, electrical, high temp and automotive. Manufactured from 100% virgin grade PTFE resins, it is the most flexible, is chemically inert and resistant to nearly all industrial chemicals and solvents.
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Precision Pump Tubing, Peroxide-Cured Silicone, I/P 82; 25 ft
Masterflex peroxide-cured silicone High-Performance Precision pump tubing features greater physical compression capability with a longer pumping life compared to platinum-cured silicone tubing. Translucent tubing is made with no additives or plasticizers and makes for easy flow monitoring. Ideal for general-purpose, biotech, and food and beverage applications, this tubing complies with USP Class VI, FDA, and 3-A standards.
Instech PE-10 tubing, .011x.024in (0.3x0.6mm), 30m (98ft) spool, non-sterile.
The Instech BTPE-10 polyethylene tubing is PE-10 size (.011x.024in / 0.3x0.6mm) and supplied non-sterile on a 30m (98ft) spool. Its low‑density PE formulation provides excellent compound compatibility and low air permeability, making it suitable for general infusion and sampling applications. An economical alternative to Intramedic™ tubing, it is not recommended for intravascular use due to stiffness and should not be autoclaved.
Features
- PE-10 size (.011x.024in / 0.3x0.6mm)
- Low-density polyethylene (LDPE)
- Excellent compound compatibility
- Low air permeability
- 30m non-sterile spool
- Not for intravascular or human use
Accuflow Systems MFLEX SILICONE TUB. #16 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex platinum-cured silicone tubing, L/S 16, 25 ft. Ensure optimal performance from your Masterflex pump Slightly greater clarity than peroxide-cured tubing Smooth surfaces; lower p