Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Grainger Metal Hose 2-1/2 ID x 18 ft.L
The Hose Master Flexible Metal Hose Assembly is a stainless steel flexible metal hose with a 1" NPT male end and a 1" NPT female swivel end. It has a working pressure of up to 300 PSI and a maximum temperature of 850°F. The corrugated stainless steel hose allows flexibility while maintaining strength and durability. It has a length of 12" and is made in the USA. The flexible metal hose is ideal for connecting rigid piping that requires flexibility and vibration absorption. Common applications include engine exhaust, fume removal, and transferring liquids, air, and gases in tight spaces.
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 1.85MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 1.85 mm ID; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.85MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.85 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX SILICONE 87 10FT
Masterflex B/T PerfectPosition Pump Tubing, Platinum-Cured Silicone, B/T 87; 10 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON 2001 1.02MM ID 33FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 1.02 mm ID x 2.72 mm OD; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP VITON 1.42MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Viton, 1.42 mm ID; 12/PK, Avantor
Grainger Fuel Filter 8-23/32x3-11/16x8-23/32 In
The Baldwin Filters 14R252 is a spin-on fuel filter that fits multiple heavy duty diesel engine applications including Caterpillar, Cummins, Detroit Diesel, Mack, and Navistar. It features a 10 micron nominal media that traps contaminants and a nitrile gasket seal. This fuel filter has a height of 7.44", OD of 3.66", and 1/4" NPT threads. The 14R252 fuel filter is made in the USA by Baldwin Filters which is known for high quality filtration products. This spin-on diesel fuel filter provides 10 micron filtration to protect diesel engine fuel systems from dirt, rust, and other contaminants.
Braintree Scientific Polyethylene .017"""" x .030"""" Per Ft., 500 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Accuflow Systems 1 1/2 Inch Silicone Hose
1-1/2 Inch ID Platinum Cured Wire Reinforced Silicone Hose 96 Inches OAL
Accuflow Systems 3/4 Inch Silicone Hose
3/4 Inch ID Platinum Cured Wire Reinforced Silicone Hose 96 Inches OAL
Accuflow Systems 1 Inch Silicone Hose
1 Inch ID Platinum Cured Wire Reinforced Silicone Hose 48 Inches OAL
Accuflow Systems 3/4 Inch Silicone Hose
3/4 Inch ID Platinum Cured Wire Reinforced Silicone Hose 120 Inches OAL
Grainger Hose Adapter 1-1/4 NPTM 3/8 NPTM
The Grainger Approved Hose Adapter is a brass hose adapter that connects 3/4 in. hose ID to 1/2 in. male pipe thread. It has a maximum pressure rating of 300 PSI and temperature rating of 250°F. This adapter allows you to connect a 3/4 in. ID hose to 1/2 in. NPT pipe fittings and valves. Made from brass for durability and corrosion resistance.