Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
GA International Cryogenic Color Dots for Tops of 0.5 mL & 1.5 mL Microtubes 0.44" / 11.2mm Circle Violet From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage. Specially designed to comfortably fit 0.5 ml, 0.6 ml, and 1.5 ml Eppendorf tube caps and microtubes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
GA International Cryogenic Color Dots for Tops of 0.5 mL & 1.5 mL Microtubes 0.44" / 11.2mm Circle Lavender From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage. Specially designed to comfortably fit 0.5 ml, 0.6 ml, and 1.5 ml Eppendorf tube caps and microtubes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
Waters Corp Tubing, Convoluted, Cuff at One End, 3/8 in x 72 in
This spare part is a Waters Quality part
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Opaque White, 1/2"" ID x 3/4""OD; 25 ft
Applications: General-purpose lab uses requiring high performance and long life. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Opaque white. Certification: Resin meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
UFP TECHNOLOGIES INC T-TUBE STRAIGHT 3FT LONG 2.0IN
UFP Technologies' straight, non-jacketed T-Tubes come in 3 ft sections. Item 102669 has a line OD of 2.00 inches.
AVANTOR MASTERFLEX (VWR LLC) Catalyst Platinum-Cured Silicone Stopped Tubing, 1.42 mm ID, 6/pk
Start pumping with little effort, as preconfigured links aid quick and easy setup. Ensure the optimal amount of tubing is in the pump head. Use with the Catalyst extenstion coils / tubing to complete your system.
Accuflow Systems 3/4 Inch PTFE Smooth Bore Hose
3/4 Inch ID PTFE Smooth Bore Hose Stainless Braided with Silicone Cover 72 Inches OAL
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Precision Pump Tubing, FDA-Compliant Viton, I/P 73; 25 ft
Masterflex FDA-Compliant Viton Precision pump tubing is designed for enhanced chemical compatibility at elevated temperatures. Tubing tolerates the transfer of the harshest chemicals such as corrosive solvents and aliphatic and aromatic hydrocarbons. The ultra-low gas permeability maintains integrity of fluid while protecting the user and environment. Ideal for where FDA compliance and superior chemical compatibility are required.
Chemglass Life Sciences Preassembled Closure and Septa, Black, GPI 13-425, 0.40" PTFE/Silicone/PTFE Septa
Preassembled Closure and Septa, Black, GPI 13-425, 0.40" PTFE/Silicone/PTFE Septa. Pre-assembled closure and septa minimize contamination from handling.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Flexible Vinyl, 1/16"" ID x 1/8"" OD; 100 ft
A good general-purpose tubing material, vinyl tubing (also known as PVC tubing) offers good chemical resistance. Its transparency allows easy visual identification of flow through the tube. This vinyl tubing's good abrasion resistance means you can use it in a laboratory, on a shop floor, or on a production bench. Vinyl tubing can be used within the temperature range of -45 to 180¿F (-43 to 82¿C).
Chemglass Life Sciences 1/4" to 1/8" PFA Compression Fitting
1/4" to 1/8" PFA Compression Fitting. Designed for use with our CG-1975 heavy wall PTFE tubing. Fittings are made entirely of chemically inert corrosion resistant PFA PTFE. Sizes and configurations other than those listed are available.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.85MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.85 mm ID; 12/PK, Avantor