Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LAB 1.85MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-Lab, 1.85 mm ID; 12/PK, Avantor
GA International Cryogenic Color Dots for Tops of 0.5 mL & 1.5 mL Microtubes 0.44" / 11.2mm Circle Violet From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage. Specially designed to comfortably fit 0.5 ml, 0.6 ml, and 1.5 ml Eppendorf tube caps and microtubes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
GA International Cryogenic Color Dots for Tops of 0.5 mL & 1.5 mL Microtubes 0.44" / 11.2mm Circle Lavender From -196°C to +110°C (-321°F to +230°F)
These small diameter round cryo labels for microtube tops are made with a strong adhesive ideal for -80°C freezers, dry ice, and liquid nitrogen storage. Specially designed to comfortably fit 0.5 ml, 0.6 ml, and 1.5 ml Eppendorf tube caps and microtubes, these circular, waterproof, cryo dot labels have a permanent adhesive that can withstand prolonged storage inside ultra-low temperature freezers. The freezer dot labels are supplied as Hagaki sheets and are available in 15 individual colors as well as packs of 15 assorted colors for color coding and rapid identification.
AVANTOR MASTERFLEX (VWR LLC) 3-STP TYGN E-LFL 1.85MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, Tygon S3™ E-LFL, 1.85 mm ID; 12/PK, Avantor
Grainger Hose Fitting Sleeve 7/8 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting used for creating leak-proof connections in fluid transfer applications. It has a 1/4" NPT female pipe thread on one end and a compression connection on the other end to connect to 1/4" OD tubing. The compression sleeve is made from brass for corrosion resistance. This fitting allows a tubing connection without flaring and can handle pressures up to 5000 psi. It is commonly used in hydraulic, pneumatic, lubrication, and industrial process systems.
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON ELFL 1.02MMID 100FT
Masterflex Ismatec Pump Tubing, Tygon S3™ E-LFL, 1.02 mm ID; 100 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG LMT-55 0.38MM ID 33FT/PK
Masterflex Ismatec Pump Tubing, Tygon LMT-55, 0.38 mm ID; 33 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex B/T PerfertPosition Pump Tubing, Peroxide-Cured Silicone, B/T 90; 10 ft
Ensure optimum performance from your Masterflex pump thanks to excellent biocompatibility of this tubing. No additives, plasticizers or DOP; odorless and nontoxic, fungus-resistant. No taste imparted to transported fluids. Extremely good at low temperatures. Weather, ozone, corona, and radiation resistant.
Grainger Corrugated Tubing Nylon 3/8 in 25 ft
The 3/4" Corrugated Loom Tubing from Grainger is a flexible, split, corrugated tubing designed to protect wires, cables, and hoses. It is made from polyethylene and has an operating temperature range of -20°F to 176°F. The tubing has a 3/4" inside diameter and is sold by the foot, with standard lengths ranging from 25' to 1000'. It can be cut to desired length. The corrugated design allows the tubing to be bent to route wires and cables without kinking. It is designed for indoor and outdoor use and protects against abrasion, moisture, and chemicals. The split design allows for easy wire and cable insertion. It comes in black color.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, C-Flex, Opaque White, 5/16"" ID x 1/2""OD; 25 ft
Applications: General-purpose lab uses requiring high performance and long life. Characteristics: Exceptional tensile and tear strength, good biocompatibility, excellent chemical resistance, low gas permeability, and a smooth surface. Opaque white. Certification: Resin meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.