Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Perkin Elmer US LLC Tygon R3603 Tubing - 1 ft x 0.375 in O.D. x 0.25 in I.D.
Tygon R3603 Tubing - 1 ft x 0.375 in O.D. x 0.25 in I.D.
Accuflow Systems C-Flex™ 374 formulation tubing, 350-foot mini-spool, ID 0.188"" x OD 0.375"" x Wall 0.094"" is manufactured from pharmaceutical-grade thermoplastic elastomer, fully validated and tested to a variety of specifications.
C-Flex is the original patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing. C-Flex tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex is suitable for sterilization by gamma irradiation and autoclave. C-Flex is moldable, bondable and formable ideal for single-use assemblies, overmolds, tubing and bags manifolds. C-Flex tubing is manufactured from pharmaceutical-grade thermoplastic elastomer, is fully characterized, validated and tested to a variety of specifications. Extensive biological, chemical, physical properties and extractable testing is available to assist in the validation of C-Flex application. Sealable and weldable either pre- or post-sterilization. Sterilizable by gamma irradiation and autoclave. Complies with USP Class VI and ISO standards.
ATLANTIC BIOPHARM SOLUTIONS LLC MC 1/2IN TUBE OD X 1/4IN MNPT
Stainless Steel Compression Tube Fitting, Male Connector, 1/2 in. Tube OD x 1/4 in. Male NPT,
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Peroxide-Cured Silicone, 1/4"" ID x 3/8"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, food and beverage, aerospace, and general lab applications. Characteristics: Peroxide-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -60 to 460¿F (-51 to 238¿C) Sterilize: Autoclave or gamma irradiation.
Accuflow Systems TUBING MFLEX C-FLEX #73 25FT
Manufactured by Cole Parmer and sold by Accuflow. Masterflex C-Flex tubing (50 A), I/P 73, 25 ft. Applications: General-purpose lab uses requiring high performance and long life. Characteristics: Exceptional tensile and tear strength; good biocompatibili
Accuflow Systems TBNG MFLEX TYGON E-LAB#16 50FT
Manufactured by Cole Parmer & sold by Accuflow. Masterflex Tygon E-Lab (E3603) Pump Tubing, L/S 16, 50 ft. Specifications: Tubing formulation - Tygon E-Lab (E-3603) Pump Series - L/S Masterflex tubing size (L/S) - 16 Tubing ID (mm) - 3.1 Hose barb size (i
Cole-Parmer TPE Tubing, Black, 1/2" ID x 5/8" OD; 25 Ft
Cole-Parmer TPE tubing is a high-performance industrial tubing manufactured from a thermoplastic elastomeric compound that consistently outperforms neoprene, EPDM and other general purpose rubber tubing. The Cole-Parmer TPE tubing features an extended service life in a wide range of applications including caustic chemical transfer, wastewater sampling, soap and disinfectant dispensing, vacuum pumps, glass and window washing systems and more. This tubing is opaque black, allowing for light and ozone resistance without weakening or cracking, and can withstand extreme temperatures from -75°F to 275°F (-60 to 135°C).
Molex-Polymicro Capillary 150UMx363UM 50M Reel
TSP150375 Flexible Fused Silica Capillary Tubing with Polyimide Coating: 150um ID x 363um OD, spool length of 50m.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 2-Stop, Peroxide-Cured Silicone, 2.79 mm ID; 6/PK
Appearance: Opaque Temperature: -70 to 52¿C Life at 100 rpm: 1000 hrs The first of a series of two-stop extension tubing options is below under Accessories. See all of our two-stop extension tubing formulations or contact our Application Specialists for personal assistance.
