Plastic Tubing

Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.

How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.

Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation

Search Within Results

1,441 – 1,455 of 3,397 results

1,441

McMaster-Carr PTFE TUBING 1/32ID 1/16OD 25FT

NC3235057 PTFE TUBING 1/32ID 1/16OD 25FT

Pricing & Availability

1,442

Ace Glass, Inc. FEP tubing, 7/16in OD x 3/8in ID, 10ft length

7/16 O.D x 3/8 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.

Pricing & Availability

1,443

Accuflow Systems Saint-Gobain C-Flex TPE Tubing, 0.5 in ID, 0.75 in OD, 50 ft Spool

Saint-Gobain C-Flex TPE Tubing, Formulation 374, is a translucent thermoplastic elastomer tubing designed for high-purity biopharmaceutical and laboratory fluid transfer. This formulation provides heat-seal and sterile-weld capability, is compatible with peristaltic pumps, and is suitable for single-use assemblies and aseptic fluid handling.

Translucent thermoplastic elastomer for visual flow monitoring.
0.500 in ID x 0.750 in OD, 0.125 in wall thickness.
50 ft (15 m) spool length.
Sterilizable by gamma and X-ray irradiation up to 50 kGy; one-time autoclave at 121 °C for 30 minutes.
Compatible with peristaltic pumps and single-use fluid transfer assemblies.
Provides heat-seal and sterile-weld performance for aseptic connections.
Suitable for buffer and media handling, cell culture, and aseptic welding operations.

Pricing & Availability

1,444

Accuflow Systems Saint-Gobain C-Flex TPE Tubing, 0.125 in ID, 50 ft, Translucent

Translucent thermoplastic elastomer tubing engineered for biopharmaceutical and laboratory fluid transfer. The tubing is flexible, bondable, and suitable for peristaltic pumps, aseptic welding, and single-use assemblies; supplied as a 50 ft coil with a 0.125 in inner diameter and 0.25 in outer diameter.

Inner diameter 0.125 in (3.2 mm)
Outer diameter 0.250 in (6.4 mm)
Wall thickness 0.062 in (1.6 mm)
Standard length 50 ft (15 m)
Material thermoplastic elastomer (TPE)
Appearance translucent for fluid visibility
Temperature range -67°C to 135°C (-85°F to 275°F)
Average working pressure 27 psi (1.9 bar)
Sterilization compatible: gamma irradiation and X-Ray up to 50 kGy; autoclave one time at 121°C for 30 minutes (radiation recommended)
Applications peristaltic pumping, aseptic sealing and welding, single-use fluid transfer, buffer and media handling

Pricing & Availability

1,445

Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP PVC, 1/4-in ID, 3/8-in OD

Tygon S3 E-3603 is a non-DEHP special PVC laboratory tubing formulated for resistance to flex-fatigue and abrasion. It features a glassy-smooth inner bore for easy visual inspection and cleaning, and is suitable for vacuum, instrumentation, and general laboratory fluid transfer applications.

Non-DEHP special PVC formulation, no BPA or phthalates.
Inner diameter: 1/4 in (6.4 mm).
Outer diameter: 3/8 in (9.6 mm).
Wall thickness: 1/16 in (1.6 mm).
Length: 15 m.
Maximum recommended operating temperature: 74 °C (165 °F).
Vacuum rating: withstands full vacuum at 73 °F (29.9 in Hg) and up to 27 in Hg at 140 °F.
Sterilization: compatible with autoclave (steam 30 min at 15 psi, 121 °C) and ethylene oxide.

Pricing & Availability

1,446

Accuflow Systems Saint-Gobain Tygon Tubing, Non-DEHP, 1/4 in I.D., 3/8 in O.D.

Tygon ND 100-65 is a crystal-clear, medical-grade, non-DEHP flexible tubing formulated with a TOTM plasticizer for use with bodily fluids and medical devices. It is supplied as 50 ft continuous lengths and is suitable for applications requiring USP Class VI biocompatibility and compatibility with common sterilization methods.

Crystal clear for visual monitoring of fluid flow.
Non-DEHP formulation (TOTM plasticizer) for reduced plasticizer migration.
1/4 in inner diameter, 3/8 in outer diameter, 1/16 in wall thickness.
Supplied as 50 ft continuous length.
Maximum suggested working pressure 30 psi at 73°F.
Minimum bend radius 1 in for routing and handling.
Vacuum rating 25 in Hg at 73°F.
Meets USP Class VI and REACH compliance.
Compatible with EtO, gas, and gamma sterilization methods.
Non-wetting surface permits complete drainage.

Pricing & Availability

1,447

Accuflow Systems Saint-Gobain C-Flex Tubing, TPE, 3/8 in ID, 5/8 in OD

C-Flex 374 TPE tubing is a pharmaceutical-grade thermoplastic elastomer tube formulated for bioprocess and laboratory fluid transfer. It is intended for aseptic welding and sealing disconnection in single-use assemblies, offering flexibility and reduced permeability compared with silicone.

Pharmaceutical-grade thermoplastic elastomer (TPE).
Translucent tubing, 0.375 in ID x 0.625 in OD.
Supplied as a 350 ft coil.
Sterilizable by gamma irradiation, X-ray irradiation, and autoclave.
Remains flexible from -45°C to 135°C (-50°F to 275°F).
Complies with USP Class VI and applicable ISO standards; animal-derived component-free.
Designed for aseptic welding, sealing disconnection, and single-use assemblies.
Lower permeability than silicone, suitable for high-purity fluid transfer.

Pricing & Availability

1,448

Scientific Commodities Inc MEDICAL GRADE PTFE MICRO TUBING (Cat.# BB311-22-100′ Roll)

MEDICAL GRADE PTFE MICRO TUBINGThis medical grade PTFE micro size tubing absorbs practically no common acids, bases or solvents. Do not confuse this grade of tubing with general purpose, commercial & industrial grade PTFE tubing; although it can be used in those applications. It is manufactured with a low level of extractables and is chemically inert. It can be safely used from -410°F (-277°C) TO 500°F (260°C). This translucent 58 shore D tubing is USP class VI certified. It also meets military spec #MIL-L-22129, UL-224. Do not use with molten alkali metals, fluorine or strong fluorinating agents. It can easily be autoclaved or eto sterilized.SCI Cat.# BB311-22Gauge Size: 22Dimensions: I.D. x O.D.: 0.028″ x 0.048″ / 0.711mm x 1.22mm