Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, PTFE, 1/8in Thermocouple, 14/20 Inner Joint
Adapter, PTFE, 1/8in Thermocouple, 14/20 Inner Joint. PTFE adapter for use with either 1/8 or 1/4 thermocouples. Adapter has an outer Viton o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Chemglass Life Sciences Adapter, PTFE, 1/4in Thermocouple, 14/20 Inner Joint
Adapter, PTFE, 1/4in Thermocouple, 14/20 Inner Joint. PTFE adapter for use with either 1/8 or 1/4 thermocouples. Adapter has an outer Viton o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Chemglass Life Sciences Brown replacment PTFE cones, Accepts 5.5mm I.D.
Brown replacement PTFE cones for the CG1047 series. Accepts 5.5mm I.D.
Chemglass Life Sciences 24/40 3-Port Adapter, Complete with (3) Nuts, (3)Ferrules, and (2) Plugs
24/40 3-Port Adapter, Complete with (3) Nuts, (3)Ferrules, and (2) Plugs. Replacement 3-port adapter for item CG103710. Comes with 3 nuts, 3 ferrules, and 2 plugs. Complete adapter (CG103710) is supplied with 90¿ valve, 3-port 24/40 PTFE Adapter and 10ft of 1/8¿ OD PTFE tubing.
Chemglass Life Sciences Adapter, Syringe Addition, 24/40 Joint Size, 105mm Height
Adapter, Syringe Addition, 24/40 Joint Size, 105mm Height. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Long Stem, 24/40 Joint Size
Adapter, Female Luer Lock, Vacuum, 1/4"-28 Thread, 14/20 Inner. Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Hose connection is 10mm OD at the largest serration. Supplied complete with 1 each CG-1055-20; 1/4”-28 Female to Female luer lock adapter.
Chemglass Life Sciences Adapter, Flow Control, 90°, 2mm Stpk, 19/22 Inner Joint
Adapter, Flow Control, 90¿, 2mm Stpk, 19/22 Inner Joint. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm. Hose connection has an O.D. of 8mm at the middle serration.
Chemglass Life Sciences 29/42 Outer Joint, Full Length, on 32mm OD x 2.4mm W tubing
29/42 Outer Joint, Full Length, on 32mm OD x 2.4mm W tubing. Standard taper outer joints tooled with reinforcing rings.
Chemglass Life Sciences 10/18 Inner Joint, Medium Length, on 8mm OD x 1.5mm W tubing
Standard taper ground inner joint, medium length. 10/18 Inner Joint, Medium Length, on 8mm OD x 1.5mm W tubing.
Chemglass Life Sciences Adapter, Syringe Addition, 14/20 Joint Size, 72mm Height
Adapter, Syringe Addition, 14/20 Joint Size, 72mm Height. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.
Chemglass Life Sciences Adapter, Thermometer, Inlet, 29/42 Inner Joint, 85mm Height, #7 Chem-Thread
Adapter, Thermometer, Inlet, 29/42 Inner Joint, 85mm Height, #7 Chem-Thread. Adapter has a #7 or #15 Chem-Thread at the top for vacuum tight seal of plain stem thermo-meters or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences 45/50 Outer Joint, Full Length, on 48mm OD x 2mm W tubing
45/50 Outer Joint, Full Length, on 48mm OD x 2mm W tubing. Standard taper outer joints tooled with reinforcing rings.
Chemglass Life Sciences 12/18 Inner Joint, Medium Length, on 10mm OD x 1.5mm W tubing
Standard taper ground inner joint, medium length. 12/18 Inner Joint, Medium Length, on 10mm OD x 1.5mm W tubing.
Chemglass Life Sciences Gray replacement PTFE cones, Accepts 6.0mm I.D.
Gray replacement PTFE cones for the CG1047 series. Accepts 6.0mm I.D.
Chemglass Life Sciences 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing
Standard taper ground inner joint, medium length. 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing.