Tubing Connectors and Fittings
Ace Glass, Inc. 28/12 ball joint, stainless steel, unthreaded
28/12, unthreaded, ball joint fabricated from 18-8 type 303 stainless steel. Fully interchangeable with ACE glass joints and has the same I.D.
Chemglass Life Sciences 19/38 Outer Joint, 22mm X 1.8W Tubing
19/38 Outer Joint, 22mm X 1.8W Tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Chemglass Life Sciences 28/15 Socket Joint, 19.0mm OD Tube, Clamp Size = 28
28/15 Socket Joint, 19.0mm OD Tube, Clamp Size = 28. Made to ASTM Specifications E677. See CG-145-B and CG-150 for clamps.
Alkali Scientific ASI™ Clear, Easy-Grip, 35 x10mm, Confocal Dish, Adhesion Type, Sterile, Treated (Positive-Charged/ Surface Coated), 50/Cs, 22 x 22 x 0.13mm, Hole 1.33mm, PS/Glass
ASI™ confocal products allow researchers to acquire high resolution microscopic images of cells in 35 mm culture dishes or 6 well plates. Low auto-fluorescence glass and FLux were used, ideal for uses of these products are confocal microscopy, phase contrast microscopy, live cell imaging and micro-manipulations. Surface materials for confocal products:Glass: naturally charged, good growth surface for adherent cellsFLux: surface modified plastic film (188 μm thick), optimal for confocal microscopy Bottom materials: Glass/FLux (no surface treatment for glass bottom) Coverslip: #1.5 Dish color: Clear/Black Dish size: 35 Ø Hole size: 13 Ø / 20 Ø / 25Ø Non – pyrogenic Non – cytotoxic DNase / RNase – free Human DNA – free
Alkali Scientific ASI™ Clear, Easy-Grip, 35 x10mm, Confocal Dish, Adhesion Type, Sterile, Non-Treated (Non-Charged/ Hydrophobic), 100/Cs, 22 x 22 x 0.2mm, Hole .98mm, PS/Glass
ASI™ confocal products allow researchers to acquire high resolution microscopic images of cells in 35 mm culture dishes or 6 well plates. Low auto-fluorescence glass and FLux were used, ideal for uses of these products are confocal microscopy, phase contrast microscopy, live cell imaging and micro-manipulations. Surface materials for confocal products:Glass: naturally charged, good growth surface for adherent cellsFLux: surface modified plastic film (188 μm thick), optimal for confocal microscopy Bottom materials: Glass/FLux (no surface treatment for glass bottom) Coverslip: #1.5 Dish color: Clear/Black Dish size: 35 Ø Hole size: 13 Ø / 20 Ø / 25Ø Non – pyrogenic Non – cytotoxic DNase / RNase – free Human DNA – free
Chemglass Life Sciences Cap, #45, With Hole, Rodaviss
Cap, #45, With Hole, Rodaviss. Threaded cap fits CG-172 outer joint, Rodaviss. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.
Bellco Glass, Inc. Freeze Dry Ampoule,1mL Constriction on neck
Type 1 class a Borosilicate glass for freeze drying or cryogenic storage. The neck has pre-drawn constriction to facilitate sealing.. MADE IN THE USA Flat bottom Constriction neck Neck od : 8mm Bottom od: 11mm Capacity: 1ml Length: 145mm
Ace Glass, Inc. 15MM GRADED SEALS 15MM GRADED SEALS
15mm quartz graded seals for connecting Pyrex or Kimax borosilicate glass to Quartz glass. Quartz length is 7.6cm, and borosilicate length is 10.2cm.
Chemglass Life Sciences 103/60 Outer Joint, Full Length, on 110mm OD x 3mm W tubing
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint. 103/60 Outer Joint, Full Length, on 110mm OD x 3mm W tubing.
Chemglass Life Sciences Joint, 35/20, Polished Socket, Clamp Size 35, 21.70-22.30mm Tubing
Joint, 35/20, Polished Socket, Clamp Size 35, 21.70-22.30mm Tubing. For use with CG-122, o-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.
Chemglass Life Sciences Chem-Thread, Glass only, Size 15, 19mm Tube OD
Chem-Thread, Glass only, Size 15, 19mm Tube OD. Threaded glass portion of Chem-Thread only.
Chemglass Life Sciences 45/50 Outer Joint, Full Length, on 48mm OD x 2.3mm W tubing
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint. 45/50 Outer Joint, Full Length, on 48mm OD x 2.3mm W tubing.
Chemglass Life Sciences 18/9 O-Ring Ball Joint, Clamp Size: 18, O-Ring Size: 112, Tubing OD: 12.50-12.90mm
18/9 O-Ring Ball Joint, Clamp Size: 18, O-Ring Size: 112,Tubing OD: 12.50-12.90mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints. Supplied complete with one Viton o-ring of the listed size.