Tubing Connectors and Fittings
Ace Glass, Inc. Hose connector, angled, GL14, 8mm OD, polypropylene with seal
Duran, polypropylene hose connector with silicone seal. All are 8mm OD, 4mm ID. Use in conjunction with our 7621 open top cap Duran product family.
Chemglass Life Sciences Distilling Adapter, Double, 20° Angled Side Neck, 29/42 Joint, 6mm PTFE Stopcock, 1/2" Swagelok
Distilling Adapter, Double, 20 Angled Side Neck, 29/42 Joint, 6mm PTFE Stopcock, 1/2" Swagelok. Adapter is designed for use with flasks or reaction vessel lids that have a 20 angled side neck. Adapter has a lower inner joint and two top outer joints. Lower stopcock is a 6mm PTFE stopcock with a 1/2 or 3/4 OD distillate takeoff for use with a compression fitting and TFE tubing. PLEASE NOTE: ADAPTER CAN BE USED WITH COMPOUND ANGLED SIDE NECKS.
Chemglass Life Sciences Distilling Adapter, Double, 10° Angled Side Neck, 29/42 Joint, 6mm PTFE Stopcock, 1/2" Swagelok
Distilling Adapter, Double, 10 Angled Side Neck, 29/42 Joint, 6mm PTFE Stopcock, 1/2" Swagelok. Adapter is designed for use with flasks or reaction vessel lids that have a 10 angled side neck. Adapter has a lower inner joint and two top outer joints. Lower stopcock is a 6mm PTFE stopcock with a 1/2 or 3/4 OD distillate takeoff for use with a compression fitting and TFE tubing. PLEASE NOTE: ADAPTER CAN BE USED WITH COMPOUND ANGLED SIDE NECKS.
Chemglass Life Sciences 60/15 Outer Joint, Short Length, on 75mm OD tubing
60/15 Outer Joint, Short Length, on 75mm OD tubing.
Chemglass Life Sciences 24/40 Inner Joint, Un-Cut Drip, on 22mm OD x 2.5mm W tubing
24/40 Inner Joint, Un-Cut Drip, on 22mm OD x 2.5mm W tubing. Standard taper inner joint having a drip tip. Joints are available uncut or with the drip tip being cut at a 45 angle. Tooled on the same tubing sizes as the CG-100 inner joints.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Polycarbonate, Straight, Female Luer x Cap; 25/PK
Easily complete your luer fittings systems with these premium connectors. Included are some special configurations available only in polycarbonate. All female ports may be used with either slip or luer lock connections. Plugs and caps are also available. Polycarbonate material has good chemical compatibility and can be sterilized via ethylene oxide or gamma irradiation.
Chemglass Life Sciences 7/25 Outer Joint, Full Length, on 10mm OD x 1.5mm W tubing
7/25 Outer Joint, Full Length, on 10mm OD x 1.5mm W tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Chemglass Life Sciences Adapter, #20 O-Ring Joint to 1" Tubulation, Aifree, Schlenk
Adapter, #20 O-Ring Joint to 1" Tubulation, Aifree, Schlenk. Lower adapter has a #20 o-ring joint with a 1" OD tubulation for connection to flexible vacuum tubing.For use with the AF-0300-50 drying tower. Image shown is full assembled tower.
Chemglass Life Sciences Adapter, Flushing, 24/40 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk
Adapter, Flushing, 24/40 Inner Joint, 4mm Glass Stpk, Airfree, Schlenk. Adapter permits vessels to be purged with an inert gas during sampling or transfer with a AF-0519 cannula. Available with a 4mm high vacuum glass stopcock having a Stainless Steel constant pressure retention device. Both the glass and PTFE stopcock have 9mm OD medium wall arms for use with CG-3022-05 red or CG-3022-22 white septum stopper. Additional arm is provided for connection to inert gas source. Supplied with two CG-3022-05 red septum stopper.
Chemglass Life Sciences Adapter, Hose, Airfree, Schlenk, 24/40 Joint Size, 10.5mm Hose Connection size, Style B
Adapter, Hose, Airfree, Schlenk, 24/40 Joint Size, 10.5mm Hose Connection size, Style B. Adapters for use with manifolds such as AF-0450 through AF-0454 to permit port connection to standard rubber hose. Adapters have hooks just below the grind for use with CG-110 Stainless Steel springs. The 24/40 size is available with a constriction above the serrated hose connection to permit bowl area to be filled with glass wool preventing solids from being drawn into the manifold. Size of hose connection is at the middle serration.