Tubing Connectors and Fittings
Chemglass Life Sciences 14/20 Inner Joint, Un-Cut Drip, on 12.7mm OD x 1.6mm
Full or medium length standard taper inner joint having a drip tip. Joints are available uncut or with the drip tip being cut at a 45º angle. Tooled on the same tubing sizes as the CG-100 inner joints. 14/20 Inner Joint, Un-Cut Drip, on 12.7mm OD x 1.6mm.
Bellco Glass, Inc. Reducing Couplers, 1/8x3/32" Single-Barbed
Clear poly-carbonate singled barbed tube fitting. Tubing use with PVC polyurethane with a hardness of shore A 45-90. These poly-carbonate single barbed fitting are transparent so you can see that is flowing through your line. Single barbed fitting minimize leaks by having a smoother sealing surface than multi barbed fittings. Poly-carbonate has high impact strength use with air, water, and food beverage material meets FDA CFR21 1771580. Can be sterilized with steam autoclaving
Chemglass Life Sciences Adapter, Universal, Inlet, 24/40 Inner Joint, #9 Chem-Thread
Adapter, Universal, Inlet, 24/40 Inner Joint, #9 Chem-Thread. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Long Stem, 14/20 Joint Size
Adapter, Vacuum Take-Off, Long Stem, 14/20 Joint Size. With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. Tubing extends 100mm below the joint on the 14/20 and 19/22 sizes and 200mm on the 24/40, 29/26 and 29/42 sizes. Serrated hose connection having an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Adapter, Universal, Inlet, 14/20 Inner Joint, #9 Chem-Thread, Hose Connection, Accepts O.D./ 7-9mm, O-Ring/110
Adapter, Universal, Inlet, 14/20 Inner Joint, #9 Chem-Thread, Hose Connection, Accepts O.D./ 7-9mm, O-Ring/110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D. such as thermometer wells, gas dispersion tubes, plain stem funnels, etc. Serrated hose connection has an O.D. of 10mm at the largest serration. Adapters are supplied complete with a Celcon compression cap and Viton o-ring.
Chemglass Life Sciences Adapter, PTFE, 1/8in Thermocouple, 14/20 Inner Joint
Adapter, PTFE, 1/8in Thermocouple, 14/20 Inner Joint. PTFE adapter for use with either 1/8 or 1/4 thermocouples. Adapter has an outer Viton o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Chemglass Life Sciences Adapter, PTFE, 1/4in Thermocouple, 14/20 Inner Joint
Adapter, PTFE, 1/4in Thermocouple, 14/20 Inner Joint. PTFE adapter for use with either 1/8 or 1/4 thermocouples. Adapter has an outer Viton o-ring to form a grease-free, airtight seal between the adapter and the listed size of outer joint. The compression nut works in conjunction with the upper Viton to provide a airtight seal between the adapter and thermocouple. Adapter design permits use with CG-145 Keck clips.
Chemglass Life Sciences Adapter, Inlet, 24/40 Inner Joint, Hose Connection
Adapter, Inlet, 24/40 Inner Joint, Hose Connection. With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. Serrated hose connection has an O.D. of 10mm at the largest serration. Supplied complete with a compression cap and Viton o-ring.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Style "A", 105°, 24/40 Joint Size
Adapter, Vacuum Take-Off, Style "A", 105¿, 24/40 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105¿ angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Brown replacment PTFE cones, Accepts 5.5mm I.D.
Brown replacement PTFE cones for the CG1047 series. Accepts 5.5mm I.D.
Chemglass Life Sciences 12/18 Inner Joint, Medium Length, on 10mm OD x 1.5mm W tubing
Standard taper ground inner joint, medium length. 12/18 Inner Joint, Medium Length, on 10mm OD x 1.5mm W tubing.
Chemglass Life Sciences Gray replacement PTFE cones, Accepts 6.0mm I.D.
Gray replacement PTFE cones for the CG1047 series. Accepts 6.0mm I.D.
Chemglass Life Sciences 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing
Standard taper ground inner joint, medium length. 24/25 Inner Joint, Medium Length, on 22mm OD x 1.8mm W tubing.
Chemglass Life Sciences 7/15 Outer Joint, Medium Length, on 10mm OD x 1.5mm W tubing
Ground Joint, Outer, Medium Length. 7/15 Outer Joint, Medium Length, on 10mm OD x 1.5mm W tubing.
Chemglass Life Sciences 7/10 Outer Joint, Medium Length, on 10mm OD x 1.5mm W tubing
Ground Joint, Outer, Medium Length. 7/10 Outer Joint, Medium Length, on 10mm OD x 1.5mm W tubing.