Tubing Connectors and Fittings
COLDER PRODUCTS COMPANY 1/4 Hose Barb Valved In-Line Coupling Body
1/4 Hose Barb Valved In-Line Coupling Body
COLDER PRODUCTS COMPANY COUPLER INSERT EA
CPC Standard-Volume Quick-Disconnect Inline Hose-Barb Inserts With Straight-Through Flow For Use With 9 5mm Acetal Max Operating Temperature 82 deg C 180 deg F Min Operating Temperature -40 deg C -40 deg F White Diameter Inner 0 37 mm Overall Length 1 36 to 1 81 in 34 5 to 46 mm
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, 1/16", SS, Hex Heads, Long Length 10-32 Screw Threads. Ferrules sold separately. 1 EA.
These "Male Nuts" used to connect Stainless Steel tubing in the high pressures zones of HPLC systems. This 316L Stainless Steel Fitting has a standard diameter Hexagonal head for wrenching the nut. The long thread length makes this Nut ideal for use on injectors such as the Rheodyne™ and others, where space is limited and you want to have this Nut extend from the others or from the injector. Use with Single Cone Stainless Steel Ferrules which are designed to work with this fitting, providing a permanent attachment to SS tubing for a high pressure connection.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, Two Pieces, 1/16", PEEK, Natural, Small Hex Head, Standard Length and 10-32 Screw Threads. Use with Single Cone Ferrules. Wrench Tighten, 1 EA
These Two Piece, "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. This fitting has a 7mm diameter knurled head, 15mm total length (top to bottom), 11mm Thread Length and requires a Single Cone Ferrule, sold separately. 2 Piece Male Nuts are often chosen because they can be used at slightly higher pressures compared to 1 Piece Nuts. The required, Single Coned Ferrules will swage tubing grip it and not spin as you turn the Nut. As Ferrules wear down, they need to be replaced. This Nut can be reused with new Ferrules.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, 1/16th, SS, Hex Heads, Medium Length 10-32 Threads. Ferrules sold separately. 1 EA.
These "Male Nuts" used to connect Stainless Steel tubing in the high pressures zones of HPLC systems. This 316L Stainless Steel Fitting has a standard diameter Hexagonal head for wrenching the nut. The medium thread length makes this Nut ideal for use on injectors such as the Rheodyne™ and others, where space is limited. Use with Single Cone Stainless Steel Ferrules which are designed to work with this fitting, providing a permanent attachment to SS tubing for a high pressure connection.
Chemglass Life Sciences 45/50 Outer Joint, 48mm X 2.3W Tubing
45/50 Outer Joint, 48mm X 2.3W Tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Chemglass Life Sciences 19/22 Inner Joint, 17.0mm X 2.5W Tubing
19/22 Inner Joint, 17.0mm X 1.8W Tubing. Standard taper ground inner joint, medium length.
Chemglass Life Sciences 14/20 Inner Joint, 13mm X 2.2W Tubing
14/20 Inner Joint, 13mm X 2.2W Tubing. Standard taper ground inner joint, medium length.
Chemglass Life Sciences 19/38 Outer Joint, 22mm X 1.8W Tubing
19/38 Outer Joint, 22mm X 1.8W Tubing. Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint.
Chemglass Life Sciences GL-18 Screw Thread, 16mm X 1.8W, 100mm OAL
GL-18 Screw Thread, 16mm X 1.8W, 100mm OAL. Screw thread tube for replacement on apparatus using the GL thread, which is manufactured to I.S.O. specifications. (GL is the I.S.O. designation for GLASS.) To be used with a CG-196 solid cap with liner or a CG-195 cap with aperture and CG-197 silicone sealing ring.
Research Products International Corp Y Tubing Connectors for 3/8 Inch Inner Diameter Tubing, 12 per Package
Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power. Chemical-resistant polypropylene plastic is for use with a wide range of liquids or gases. FDA-grade allow for direct contact with food, drugs, and cosmetics. Fittings are autoclavable.
Chemglass Life Sciences Cap, #45, With Hole, Rodaviss
Cap, #45, With Hole, Rodaviss. Threaded cap fits CG-172 outer joint, Rodaviss. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal.
Research Products International Corp Y Tubing Connectors for 1/4 Inch Inner Diameter Tubing, 12 per Package
Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power. Chemical-resistant polypropylene plastic is for use with a wide range of liquids or gases. FDA-grade allow for direct contact with food, drugs, and cosmetics. Fittings are autoclavable.